Vortex shedding from a ring in shear flow

Vortex shedding from a bluff ring in a linear shear flow has been investigated experimentally. The shedding frequency, measured using a hot wire in various positions within the near wake of the ring, was found to be remarkably insensitive to a mean flow shear parameter, , defined by (d/U _o).U/y, where d is the mean ring diameter and U _o is the undisturbed upstream velocity on the ring axis; even for = 0.41, corresponding to a velocity variation of about ±24% across the outer ring diameter, the Strouhal number was only about 5% lower than in uniform flow. However, the strong axisymmetric shedding which dominates the flow for = 0 is significantly affected by shear. Indeed, spatial correlation measurements demonstrated that the shedding actually becomes anti-symmetric at the highest values of . The implication of these results is that vortex flowmeters constructed using a ring as the shedding body would be relatively unaffected by changes in the upstream mean flow profile.     

Ageladine A: an antiangiogenic matrixmetalloproteinase inhibitor from the marine sponge Agelas nakamurai

A novel MMP inhibitor, ageladine A (1) with antiangiogenic activity was isolated from a marine sponge Agelas nakamurai. Structure 1 was determined by a combination of spectroscopic and chemical methods to be an unprecedented structure of 4-(4,5-dibromo-1H-pyrrol-2-yl)]-1H-imidazo[4,5-c]pyridin-2-amine.     

Radiation-induced heterogeneous polymerization of acrylamide in acetone and acetone–water mixtures

The effects of temperature, dose rate, and monomer concentration on the heterogeneous polymerization of acrylamide in acetone–water mixtures have been studied. Heterogeneous polymerization takes place in mixtures containing less than 60 vol-% water. The polymerization is steady in acetone and nonsteady in acetone an nonsteady in mixtures containing 10–50 vol-% water. The average rate of polymerization is highest in mixtures with about 20 vol-% water. Polymer molecular weight increases with the increasing water content in range 0–10 vol-% and does not change in the range of 30–70 vol-% water. For the polymerization in acetone and an acetone–water 60/40 mixture the activation energies are 2.3 and ?1.8 kcal/mole, the dose rate exponents of rate are 0.78 and 0.52, and the monomer concentration exponents of rate are 0.5 and 1.6, respectively. The polymer molecular weight increases with decreasing dose rate, decreasing temperature, and increasing monomer concentration. These results are discussed in connection with the mechanism of heterogeneous polymerization and the solvent effect.     

Direct UHV-TEM observation of palladium clusters on a silicon surface.

About 1 monolayer of palladium was deposited onto a silicon (111) 7 x 7 surface at a temperature of about 550 K inside an ultrahigh vacuum transmission electron microscope, resulting in formation of Pd2Si nanoislands and a 1 x 1 surface layer. Pd clusters created from an excess of Pd atoms on the 1 x 1 surface layer were directly observed by in situ plan view high-resolution transmission electron microscopy. When an objective aperture was introduced so that electron diffractions less than 0.20 nm were filtered out, the lattice structure of the 1 x 1 surface with 0.33 nm spacing and the Pd clusters with a trimer shape were visualized. It was found that image contrast of the 1 x 1 lattice on the specific height terraces disappeared, and thereby an atomic structure of the Pd clusters was clearly observed. The appearance and disappearance of the 1 x 1 lattice was explained by the effect of the kinematical diffraction. It was identified that a Pd cluster was composed of three Pd atoms without a centered Si atom, which is consistent with the model proposed previously. The feature of the Pd clusters stuck at the surface step was also described.     

Polymer-Supported dicyanoketene acetal as a pi-acid catalyst: monothioacetalization and carbon-carbon bond formation of acetals

Polymeric dicyanoketene acetals (DCKA) were synthesized by copolymerization of styrene and divinylbenzene or ethylene glycol dimethacrylate. These novel polymers could be used successfully as recyclable pi-acid catalysts in monothioacetalization or carbon-carbon bond forming reaction of acetals.     

Studies on separation mechanisms of biological molecules on a polyvinyl alcohol column

Summary The chromatographic separation mechanism on a polyvinyl alcohol (PVA) column in aqueous systems was explored utilizing several different types of compound such as polyethylene glycols, carbohydrates, pyrimidine and purine bases, fatty acids, monophosphate nucleotides and glycyl-peptides. Two types of separation mechanisms were found to occur for these substrates. The polyethylene glycols and the carbohydrates were eluted by size-exclusion chromatography. The retention behavior of the other substrates could be explained by the solvophobic theory, suggesting that the predominant separation mode was reversed-phase chromatography. The occurrence of reversed-phase chromatography was also indicated by the remarkable effect of the addition of ion-association reagents to the chromatographic system on the retention of the monophosphate nucleotides.     

Effect of phenyl substituent on the dimerization of copper(II)-carboxylate in solvent extraction of copper(II) with phenylacetic acid

The effects of the phenyl substituent on the dimerization of copper(II) carboxylate in the solvent extraction of copper(II) with phenylacetic acid using benzene and 1-octanol as a solvent were investigated, at 25 degrees and at the aqueous ionic strength of 0.1M (NaClO(4)). The dimerization of copper(II) phenylacetate has been found to be written as: 2CuA(2)Cu(2)A(4) in 1-octanol, and 2CuA(2)(HA)(2)Cu(2)A(4)(HA)(2) + (HA)(2) in benzene, with the dimerization constants, log K = 2.24 and log K = 4.19, respectively. It was proved that the phenyl group inhibits the formation of the dimeric copper(II) phenylacetate, and its effect is partially shielded by a methylene substituent.