Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(benzoxazole)s of high molecular weights has been developed. These polymers were prepared readily by direct polycondensation of aromatic dicarboxylic acids containing phenyl either structure with 3,3′-dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid (PPMA) as condensing agent and solvent. Polycondensations proceeded fast and was completed within 5 h at 140°C and produced poly(benzoxazole)s with inherent viscosities up to 4.6 dL/g. Model compound work was performed in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(benzoxazole)s showed 10% weight loss in air and nitrogen at 450–505°C and 465–535°C, respectively.     

Guest shape-responsive fitting of porous coordination polymer with shrinkable framework

In situ synchrotron X-ray powder diffraction patterns of porous coordination polymers [[Cu(2)(pzdc)(2)(bpy)].G] have been measured (pzdc = pyrazine-2,3-dicarboxylate, bpy = 4,4'-bipyridine) (where G = H(2)O for CPL-2 superset H(2)()O, G = benzene for CPL-2 superset benzene, and G = void for the apohost). The structures of apohost and CPL-2 superset benzene were determined from Rietveld analysis. Adsorption of benzene in the channels induced a remarkable contraction in the crystal (b axis; 6.8%, volume; 4.9%), although the channels were occupied by the benzene molecules. This crystal transformation provides a new pore structure that is well suited for benzene molecules, and we denote it as a "shape-responsive fitting" transformation. This type of pore gives rise to a new guideline: frameworks can be composed of flexible motifs that are linked via strong bond and/or stiff motifs that are connected via weaker bonds.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

Bildung von Fe3S4?FeS2 durch hydrothermale Reaktion

A mixture of Fe₃S₄ (greigite) and FeS₂ (pyrite) is formed at 200°C on hydrothermal treatment of freshly precipitated iron sulphide. Its electron diffraction diagramm was recorded, which corresponded to an incomplete solid solution of Fe₃S₄ and FeS₂. The surface and the interior of the spherical particles of the samples (size about 500 Å) consisted of Fe₃S₄ and FeS₂, respectively.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Synthesis and antinociceptive activity of orally active opioid peptides: improvement of oral bioavailability by esterification

To improve the oral bioavailability of a dermorphin tetrapeptide analog, N(alpha)-1-iminoethyl-Tyr-D-MetO-Phe-MebetaAla-OH (III), which has a potent analgesic activity after oral administration, various derivatives were synthesized to increase lipophilicity by esterification of the C-terminal carboxyl group and/or acylation of the phenolic hydroxyl group on Tyr1. Antinociceptive activity was evaluated after subcutaneous or oral administration using the mouse tail pressure test. As a result, increased antinociceptive activity after oral administration as well as an improved ED50(p.o.)/ED50(s.c.) ratio, which is an indicator of oral bioavailability, were found for some compounds. With regard to the improvement of bioavailability, derivatives with acylation of the phenolic hydroxyl group on Tyr1 showed better results than derivatives with esterification of the C-terminal carboxyl group. In particular, an ED50(p.o.)/ED50(s.c.) ratio equivalent to that of morphine was found for an acetylated derivative, N(alpha)-1-iminoethyl-Tyr(COMe)-D-MetO-Phe-MebetaAla-OH (7a), as well as for a methoxycarbonylated derivative, N(alpha)-1-iminoethyl-Tyr(CO2Me)-D-MetO-Phe-MebetaAla-OH (7l).     

Absolute stereochemistries and total synthesis of (+)-arisugacins A and B, potent, orally bioactive and selective inhibitors of acetylcholinesterase

In the current studies, we used the Kakisawa-Kashman modification of the Mosher NMR method to determine the complete absolute stereochemistry of arisugacins. We also report the convergent total synthesis of (+)-arisugacins A and B by a sequence including (i) ruthenium complex-catalyzed asymmetric reduction of the cyclohexenone derivative; (ii) stereoselective construction of the arisugacin skeleton by a Knoevenagel-type reaction of an α,β-unsaturated aldehyde derivative with production of a 4-hydroxy-2-pyrone derivative as a key reaction; and (iii) stereoselective dihydroxylation to give the diol derivative, followed by deoxygenation. Accordingly, we defined the absolute structures of arisugacins A and B as 4a-(R),6a-(R),12a-(R), and 12b-(S). Finally, we characterized the bioactivities of the synthetic intermediates to understand the structure-activity relationships of the arisugacins.