Rapid ruthenium-catalyzed synthesis of pyranopyrandiones by reconstructive carbonylation of cyclopropenones involving C[bond]C bond cleavage

Pyranopyrandiones were prepared by a novel ruthenium-catalyzed carbonylative dimerization of cyclopropenones via C-C bond cleavage. For example, treatment of dipropylcyclopropenone with a catalytic amount of Ru3(CO)12 and NEt3 in THF under 15 atm of carbon monoxide at 140 degrees C for 20 h gave a novel functional monomer, 3,4,7,8-tetrapropylpyrano[6,5-e]pyran-2,6-dione, in an isolated yield of 81%. Unsymmetrically substituted pyranopyrandiones were also obtained by ruthenium-catalyzed carbonylative coupling of cyclopropenones with alkynes under similar reaction conditions.     

Measurement of low concentrations of hydrogen in small samples by intermediate neutron moderation

An improved method based on the moderation of intermediate neutrons for the measurement of hydrogen in small samples is described. With the aid of boron and cadmium filters, a space shielded from slow neutrons is set up close to an isotopic neutron source shrouded by water moderator. A BF₃ proportional counter enclosed with a sample cell is placed in this space. The neutron count rate of the counter increases when a hydrogen-containing material is introduced into the cell, due to the moderation of intermediate neutrons passing through the filters. With a 1.3 μg²⁵²Cf neutron source, the lower limit of hydrogen detection for 200 ml samples in 10 min count time is 0.01 wt.%. This method is suitable for measuring the H₂O content of heavy water.     

Molecular Recognition Study on a Supramolecular System. Part 21. Inclusion Complexation Thermodynamics of Aliphatic Alcohols by Organoselenium Modified β-Cyclodextrins

The spectrophotometric titrations have beenperformed at 25–40 °C in aqueous solution to give the complexstability constants and the thermodynamic parametersfor the stoichiometric 1 : 1 inclusion complexation ofvarious aliphatic alcohols withmono[6-(phenylseleno)-6-deoxy]--cyclodextrin (2),mono[6-(o-, m-,p-tolylseleno)-6-deoxy]--cyclodextrin (3–5),mono[6-(p-chloro-phenyl-seleno)-6-deoxy]--cyclodextrin(6), mono[6-(benzylseleno)-6-deoxy]--cyclodextrin (7) and mono[6-(naphthaleneseleno)-6-deoxy]--cyclodextrin(8). On thebasis of the present and previous results, themolecular binding abilities and selectivities forguest aliphatic alcohols of the host -cyclodextrinderivatives (2–8) are discussed comparatively and globallyfrom the thermodynamic point of view. Thethermodynamic parameters obtained are criticalfunctions of the size/shape of aliphatic alcohols, andthe position and type of the substituent introduced tothe aromatic ring of -cyclodextrin's sidearm,which are elucidatedin terms of the conformational, electrostatic,hydrogen-bonding, and hydrophobic effects.     

THE CONFORMATIONAL ANALYSIS AND PHOTOISOMERIZATION OF RETINOCHROME ANALOGS WITH POLYENALS

Abstract— 3, 7-Dimethyl-2, 4, 6, 8, 10-dodecapentaenal was synthesized for reconstitution of the retinochrome analog. Its opsin shift was 1000 cm ¹ smaller than that of native retinochrome, whose chromophore contains the same number of double bonds. The conformational change from 6-s-trans to 6-s-cis , as figured in a retinal molecule, plays an important role in the formation of the retinochrome analog, based on the estimation of opsin shifts for retinal analogs locked in the 6-s conformation. Thus the conformation of the 6–7 single bond in the native retinochrome was suggested to be 6 -cis . Analysis of the circular dichroic spectra of retinochrome analogs revealed that the 6-s conformation is independent of the appearance of the β-band. The stereoselectivity in the photoisomerization of the retinal analogs by a retinochrome template depends on the hydrophobic binding in the region of the β-ionone ring.     

Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

Bildung von Fe3S4?FeS2 durch hydrothermale Reaktion

A mixture of Fe₃S₄ (greigite) and FeS₂ (pyrite) is formed at 200°C on hydrothermal treatment of freshly precipitated iron sulphide. Its electron diffraction diagramm was recorded, which corresponded to an incomplete solid solution of Fe₃S₄ and FeS₂. The surface and the interior of the spherical particles of the samples (size about 500 Å) consisted of Fe₃S₄ and FeS₂, respectively.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

Photopolymerization of cyclohexene oxide by use of o-nitrobenzyl triphenylsilyl ether/aluminum compound catalyst. Dependence of catalyst activity on the structure of the silyl ether

o-Nitrobenzyl triphenylsilyl ehther/aluminum compound has been previously shown by the authors to act as catalyst in the photopolymerization of epoxides. The dependence of the structure of the silyl ether on the catalyst activity was examined. There were two steps in the photopolymerization. The first step (“Step 1”) is photodecomposition of the silyl ether to silanol. The second step (“Step 2”) is the initiation of polymerization by silanol and the aluminum compound. The introduction of an electron withdrawing group, Cl, CF₃, on the benzene ring bonded to Si made the quantum yield of Step 1 low, however, the rate of Step 2 was increased. The low quantum yield of Step 1 was explained in terms of the rate of electron transfer that is controlled by the relative electron density between the CH₂ and NO₂ in the o-nitrobenzyl group. The acceleration of Step 2 was explained in terms of an increase in silanol acidity that was promoted by the introduction of an electron withdrawing group. The overall rate of the photopolymerizatiol depends to a greater degree on the rate of Step 2 than on that of Step 1.     

Fluorinated monomer–styrene copolymer latex particles: I. kinetic studies in a soap-free aqueous medium

Soap-free emulsion copolymerization of 2, 2, 2-trifluoroethyl acrylate (3FEA) with styrene was carried out by using potassium persulfate as an initiator, and the effects of the weight fraction of 3FEA in the monomer feed on the kinetics and the particle size were investigated. Monomer conversions were followed by a gravimetric method, revealing that the overall polymerization rate increased exponentially with an increase in the weight fraction of 3FEA. According to dynamic light scattering measurement, the final particle size was found to decrease with an increase in the weight fraction of 3FEA. The number of particles for 3FEA homopolymerization was roughly twice as large as that at the fraction of 0.9, although both fractions had the almost same polymerization rates. These results indicate that soap-free emulsion homopolymerization of 3FEA would proceed not only inside the polymer particles but also in the aqueous phase throughout the polymerization.