茂基稀土胺化物与异氰酸正己酯的反应-{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2的合成及表征

茂基稀土胺化物(MeCp)2YbNPh2(THF)与异氰酸正己酯(n-HexylNCO)按11摩尔比反应, 分离出产物{(MeC5H4)2Yb[OC(NPh2)N(n-hexyl)]}2. 产物经元素分析和核磁共振表征, 并测定了其晶体结构. 配合物属三斜晶系, R-3空间群, 晶胞参数为a=2.9533(11) nm, b=2.9533(11) nm, c=1.5873(6) nm, V=11.9896(80) nm3, Z=9, Dc=1.562 mg·m-3, μ=3.536 mm-1 (Mo Kα), F(000)=5670, R=0.034, Rw=0.064. 该化合物具有二个对称氧桥的双分子结构, 并存在着由氮原子向中心金属镱分子内配位而形成的三环骨架, 中心金属镱的配位数是九, 整个分子呈中心对称.     

The structure of adducts of benzaldoxime and m-chlorobenzaldoxime dehydrodimers with styrene

The reaction of m-chlorobenzaldoxime dehydrodimer with styrene gives two 1:1 adducts.The main product 7 is a bisnitrone. The minor product 8 has been shown by X-ray diffraction anal-ysis to possess the structure: ArCH(N=O)CH_2CH (Ph)O--N=CHAr. The two C=N bonds areall in Z configuration. The structure of the adducts from benzaldoxime dehydrodimer and styrene isalso assigned.     

联苯基团引起的激发三重态重排活性增长

双发色团分子光化学研究兴趣与日俱增。我们在以前报道一个有趣的现象:基态发色团间的分子轨道交叠左右光反应机理。3-甲基-3-联苯基-1-丁烯(1),是有特殊意义的分子。与激发能高达(143 kcal/mol)的孤立双键相比,联苯基的激发能特别低(69 kcal/mool)。如此大的激发能差使乙烯基与联苯 p电子间的交叠通道更加畅通,基态1的稳定构象是 endo 型,1的光化学行为将不同于无环双π甲烷分子。1000 W 高压汞灯照射1的正已烷溶液,     

溶剂蒸气对聚对苯二甲酸乙二酯作用的差示扫描量热研究

用差示扫描量热(DSC)研究了几种有机溶剂蒸气对聚对苯二甲酸乙二酯(PET)的作用,表明可分为反应性的和非反应性的两种。同时,对于非反应性的作用,依冷结晶峰面积的变化,又可分为三种类型:冷结晶峰面积不变,经诱导期后下降,无诱导期而迅速下降。双冷结晶峰现象在一些非反应性溶剂处理过的PET试样的DSC曲线也观察到。     

火焰原子吸收法快速分析硫酸中铅镉铜锌

文中直接取硫酸样品3ml于装有约10ml水的25ml比色管中,加入碘化钾溶液2ml,用水稀至刻度。加入甲基异丁酮5ml,萃取lmin,分层后,在有机相中测定铅、镉、铜含量;在水相中测定锌含量。方法的加标回收率为98.9％～103％,精密度1.8％～4.3％,标准曲线法和标准加入法结果相近,倍比试验结果亦相吻合,方法快速简便、准确,适合于工业中的快速分析。     

纳米晶La_（1－_x）Sr_xFeO_3的合成及气敏特性的研究

用柠檬酸盐法合成出Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３（ｘ＝０．１，０．２，０．３，０．４）原粉，再经固相反应得到纳米晶粉末，用ＴＧ、ＤＴＡ、ＸＲＤ、ＩＲ进行了表征，确证复合氧化物Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３为钙钛矿型结构，粒径在１０～２５ｎｍ之间。实验结果表明，随着固相反应条件不同，产物粒径呈规律性变化．气敏特性研究表明，该纳米晶材料对乙醇有较高的选择性和灵敏度，其选择性顺序为Ｌａ_（０．９）Ｓｒ_（０．１）ＦｅＯ_３＞ＬａＦｅＯ_３＞ＬａＦｅＯ_３（大晶粒）。     

Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine

A bio-mimic bulk acoustic wave (BAW) sensor was fabricated by coating the caffeine (CAF) template molecular imprinting polymer (MIP). This sensor exhibited high selectivity and a sensitive mass response to CAF. The response range of the sensor was between 5.0 x 10(-9) and 1.0 x 10(-4) M with a detection limit of 5.0 x 10(-9) M at pH 8.0. Recoveries were 96.1-105.6%. Influencing factors were investigated in detail and optimized. When employed to detect real samples, the proposed method proved to be a convenient method with the advantages of high sensitivity, good selectivity and ease of handling.     

Fast electron transfer repair of oxidizing OH adduct of dGMP by chlorogenic acid

ＥｘｔｅｎｓｉｖｅｓｔｕｄｉｅｓｏｆｒａｄｉａｔｉｏｎｏｒｃｈｅｍｉｃａｌｉｎｊｕｒｙｏｆｂｉｏｌｏｇｉｃａｌｔａｒｇｅｔｍｏｌｅｃｕｌｅｓｄｅｍｏｎｓｔｒａｔｅｔｈａｔＯＨｒａｄｉｃａｌ,ｔｈｅｍｏｓｔｒｅａｃｔｉｖｅｏｘｙｇｅｎｓｐｅｃｉｅｓ,ｒｅａｃｔｓｗｉｔｈｂｉｏｌｏｇｉｃａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓ,ｓｕｃｈａｓＤＮＡ,ｉｎｄｕｃｉｎｇｂａｓｅａｌｔｅｒａｔｉｏｎｓ,ｂａｓｉｃｓｉｔｅｓ,ａｎｄｓｔｒａｎｄｂｒｅａｋｓ,ｒｅｓｕｌｔｅｄｉｎｖａｒｉｏｕｓｐａｔｈｏｇｅｎｅｓｉｓ,ｓｕｃｈ…     

从静态应力松弛实验求材料准松弛时间谱的一种数值计算方法

避开繁琐困难的函数求解过程，采用数值计算方法，从常规的静态应力松弛实验，直接求被测材料的松弛单元的表现松弛强度．主松弛时间τ０由单－ＭＡＸＷＥＬＬ模型求得，其他松弛时间分别约取为１０（－２）·τ０，１０（－１）·τ０，１０１·τ０，１０３·τ０。应力松弛万程取５参数模型，记为谱的强度ａｉ（或Ａｉ）通过多元线性回归，由最小二乘法确定．对一种天然橡胶试样在不同温度下的松弛曲线进行处理，回归值与原始实验值吻合良好，不同温度下的松弛单元对总松弛的贡献，反映出温度对松弛过程的活化作用．     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.