缬氨醇衍生的手性二茂铁亚胺环钯化合物的合成及晶体结构

含氮配位基团的二茂铁衍生物的环钯化合物在有机合成、催化等领或有着重要的应用,尽管目前已经合成了从多的二茂铁环钯化合物,但其中绝大部分为外消旋体。二茂铁是引入平面手性的理想骨架,通过经典的拆分方法或利用光学纯的二茂铁配体进行不对称环钯化反应可得到具有平面手性的二茂铁环钯化合物,研究发现,利用平面手性的二茂铁环钯化合物与金属汞嘲、锡等的金属转移反应可方便地制备平面构型保持的手性环汞、环锡化合物;还可将它们用于外消旋氨基酸的手性拆分及催化不对称Claisen重排反应（ee值最高可达95％）。     

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

脱氢枞胺及其衍生物的研究与应用进展

脱氢枞胺及其衍生物在手性拆分、金属离子浮选、表面活性、杀菌、医药、染料等领域有着重要的用途。本文对脱氢枞胺的制备、脱氢枞胺成盐衍生物以及脱氢枞胺成键衍生物的研究与应用进展进行了综述,并对脱氢枞胺及其衍生物的研究及应用前景进行了展望。     

反胶束法制备直接甲醇燃料电池Pt-Sn/C催化剂及其表征

在水/AOT/环己烷反胶束体系中, 制备了Pt-Sn/C催化剂, 研究了不同ω (反胶束溶液中水与表面活性剂的物质量之比)值对Pt-Sn粒径的影响. 并采用TEM, XRD, XPS, 循环伏安等技术对其进行表征. TEM结果表明合成的Pt-Sn纳米颗粒为球形, 在碳载体表面均匀分布, 粒径分布窄, 平均粒径为2.7 nm. Pt-Sn颗粒尺寸随着ω的增加而增大. XRD结果表明该催化剂中Pt具有面心立方结构且没有与Sn形成合金. XPS结果表明在该催化剂中, Pt主要以零价态存在. 在甲醇溶液中的循环伏安扫描结果表明, 甲醇氧化峰电位和峰电流随着ω的增加而减小, 说明反胶束方法可以通过控制颗粒尺寸, 从而影响催化剂的电氧化活性. 相对于商用Pt-Ru/Vulcan XC-72 (20 wt%, E-TEK公司), 该催化剂具有较低的峰电势以及较高的I_f/I_b (循环伏安曲线中正向扫描峰电流与反向扫描峰电流的比值), 这表明用此方法制备的Pt-Sn/C催化剂具有较好的抗中毒能力.     

丙交酯合成过程的理论及实验研究

采用密度泛函方法研究了丙交酯的合成过程, 优化了合成过程中可能出现的化合物的几何构型, 分析了各化合物的振动频率和偶极矩. 在B3LYP/6-31G*和B3LYP/6-311＋G*水平上进行了各化合物的能量计算, 得到了所设计的各模型反应的焓变和吉布斯自由能变. 结果表明, 所选择的各模型反应为吸热反应且近似可逆, 水的控制对丙交酯的形成很重要. 根据量化计算结果与丙交酯合成实验中不同阶段反应体系红外谱图的变化, 提出了丙交酯合成的可能机理.     

ZnSe纳米片晶的可控合成

以乙二胺四乙酸(EDTA)为稳定剂、丁胺(BA)为结构导向模板, 采用水热合成方法制备了尺寸和晶型可控的ZnSe纳米片晶; 利用XRD, TEM, SEM以及紫外-可见漫反射等手段对所得的产物进了表征, 结果表明, 通过改变水热温度和BA用量, 可以实现ZnSe纳米片晶的大小和物相的调控, 并初步分析了其形成过程.     

磺酸功能化三维有序大孔材料的制备与催化性能研究

采用模板法, 用正硅酸乙酯和3-巯丙基-三甲氧基硅烷的混合溶胶, 在聚苯乙烯胶晶间隙中原位转化, 除去模板后用双氧水将巯基氧化成磺酸基, 首次成功地制备了大孔规整排列的3DOM SiO₂-SO₃H材料. 样品用SEM, EDS, FT-IR等方法进行了测试表征. 结果表明, 所得到材料的三维大孔结构规整性十分好, 大孔孔径大约250 nm, 并由大约80 nm的小孔相连; 磺酸基很好地嵌入孔壁基质中, 吡啶吸附测定显示了典型的质子酸特征, 而且酸中心随硫含量增加而增多. 对乙酸与正丁醇的酯化反应显示了良好的催化性能, 磺酸含量越大, 催化活性越高. 这一研究为开发新型高效的固体酸催化剂提供了很有意义的结果.     

Synthesis, Crystal Structure, Fluorescent and Thermal Properties of Sodium Tridecafluorodizirconate Na5Zr2F13 Compound

1 INTRODUCTION Considerable research effort on the heavy metal fluoride glasses like barium, zirconium fluoride and a series of rare-earth fluorozirconate compounds du- ring the last two decades was initiated by the broad optical transmission window of these glasses and thereby the potential for ultralow-loss optical fi- bers[1~10]. The fluorozirconate of alkali metals was first reported in 1938[11], and most of the sodium and potassium fluorozirconates were reported amongthe 1940s and 19…     

Synthesis and Crystal Structure of a Co(II) Complex with Schiff Base and Imidazole Ligand

1 INTRODUCTION The chemical behavior of metal complexes with Schiff base ligand has attracted much attention be- cause of their catalytic activity in some industrial[1, 2] and biochemical processes[3~5]. As some metal com- plexes have shown the catalytic activity in some polymerization reactions[2, 6], we are recently inte- rested in polymerizartion of organo-silicon com- pounds catalyzed by Schiff base complexes of tran- sition metals. A series of Schiff base complexes have been prepare…     

Investigation on Electronic Structures and Spectra for the Substituted Fullerene C77B-

1 INTRODUCTION After Guo[1] synthesized and detected C60-nBn and C70-nBn by mass spectra, investigations on fullerenes doped by other atoms became more and more interesting. Andreoni[2] studied the impurity states of the doped fullerenes C59B; Dong[3] calculated the structural and electronic properties of C59B; Wang[4] assessed the stability of heterohedral fullerenes C60-xBx. Lamparth[5] prepared C59N and C69N , and put forward the possible structures for C59N . Sahoo[6] obtained…