基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

用干涉方法测量薄膜应力

基于基片弯曲法和牛顿环的基本原理,使用He-Ne激光器、扩束镜、凸透镜和带分光镜的移测显微镜,搭建了薄膜应力测量装置.采用直流溅射法制备了厚度为30~144 nm的银薄膜,衬底采用厚度为0.15 mm、直径为18 mm的圆形玻璃片.实验发现,薄膜厚度对银薄膜的内应力有显著的影响,在薄膜厚度很小时,随着薄膜厚度的增加,应力迅速增大,达到最大值后,随着厚度的继续增加,薄膜应力下降较快并趋于稳定值.     

A BODY MASS DEPENDENT MECHANICAL IMPEDANCE MODEL FOR APPLICATIONS IN VIBRATION SEAT TESTING

A three degree-of-freedom model is proposed to predict the biodynamic responses of the seated human body of different masses. A baseline model is initially derived to satisfy both the mean apparent mass and seat-to-head transmissibility responses proposed in ISO/DIS 5982:2000 applicable for mean body mass of 75 kg. The validity of the resultant generic mass dependent model is verified by comparing the apparent mass and driving-point mechanical impedance responses computed for total body masses of 55, 75 and 90 kg with the range of idealized values proposed for body masses within the 49-93 kg range. Considering the lack of data that could be found to define the apparent mass/mechanical impedance of subjects with different body masses when applying the experimental conditions defined in ISO/DIS 5982:2000, an attempt is made to adapt the parameters of the base model to fit the measured apparent mass data applicable to groups of automobile occupants within different mass ranges. This is achieved through constrained parametric optimization which consists of minimizing the sum of squared errors between the computed response and the mean apparent mass data measured for automobile occupants within four mass groups: less than 60 kg, 60·5-70·5 kg, 70·5-80 kg and above 80 kg. The results show a reasonably good agreement between the model responses and the measured apparent mass data, particularly at frequencies below 10 Hz. The results suggest that the proposed mass dependent model can effectively predict the apparent mass responses of automobile occupants over a wide range of body masses and for two different postures: passenger (hands-in-lap) and driver (hands-on-steering wheel) postures.     

X射线形貌法观察空间电荷缀饰的α—LiIO3单晶的缺陷

实验观察到:α-LiIO₃单晶在c向静电场作用下,与c轴平行的观察面上X射线衍射形貌图有明显的变化。去掉电场,形貌图又复原。此种变化和复原都有个弛豫过程。形貌图形的变化与外电压的极性和大小有关,而基本上与辐射波长无关。静电场下,形貌图上显现的是空间电荷缀饰的晶体的宏观缺陷。即加静电场后,空间电荷在缺陷周围富集,增大了缺陷处的晶格畸变,使原来观察不到的缺陷显示了出来。 关键词：     

Tc级数解的收敛半径问题

本文从Eliashberg方程出发,证明了一个计算T_c级数解收敛半径1/Λ的公式。它和作者之一及其合作者在前一篇文章中猜测的公式实际上是相符的,从而肯定了他们建议的计算Λ的方法是正确的。 关键词：     

新型Kerr介质中非线性光学效应的研究

本文通过z扫描方法重新研究中国茶的酒精或水溶液的非线性光学效应,表明它们仅与介质中光热感应的负透镜效应相关。 关键词：     

单晶光纤损耗谱测量装置

本文描述了一套用以测量单晶光纤损耗谱的装置。本装置由卤钨灯,单色仪,积分球,AgORbCs光电倍增管以及数据采集,处理和控制系统组成。可测量300～1150nm的光谱范围。利用本装置可获得单晶光纤的吸收光谱,透过率谱,散射光谱以及散射位置谱。     

钯氢的热中子非弹性散射

在铍过滤探测器谱仪上,对含氢量为x=0.17和0.67的两种钯氢(PdH_x)样品分别测定了定域模(或光学支),观察到x=0.67的定域模峰位置相对于x=0.17的峰位置向低能移动约5毫电子伏,定性地讨论了定域模软化与超导性的关系。 关键词：