35Cr25Ni12奥氏体耐热钢中碳化物的电子显微分析

应用扫描电镜（SEM）和透射电镜（TEM）研究了长期使用前后的35Cr25Ni12奥氏体耐热钢中的碳化物演变行为；该钢固溶时效后的组织由初晶奥氏体及M23C6共晶碳化物组成，奥氏体基体中析出了二次M23C6，二次碳化物总是与基体保持立方－立方取向关系；长期使用（3、5年）后，奥氏体中析出的二次碳化物量明显增加，部分M23C6已转变为M6C，M6C与奥氏体基体以及二次碳化物M23C6保持[001]M6C//[221]A//[221]M23C6孪晶取向关系。     

27,28P+28Si总反应截面增强及可能相关的机制

测量了27,28P和相应同中子异位素在28Si靶上的中能反应截面.测得N=12和13同中子异位素的反应截面在Z=15处突然增大.对Z≤14同中子异位素和28P的实验数据结果可以用改进的光学极限近似的Glauber理论很好地描述.28P的反应截面能够用扩大核芯以改进的Glauber理论来解释.但是,用改进光学极限和少体近似的Glauber理论却低估了27P的实验数据.理论分析表明,扩大的核芯加质子晕可能是响应27P+28Si反应截面增强的机制. The reaction cross sections of~(27,28)P and the corresponding isotones on Si target were measured at intermediate energies. The measured reaction cross sections of the N=12 and 13 isotones show an abrupt increase at Z=15. The experimental results for the isotones with Z≤14 and~(28)P can be described well by the modified Glauber theory of the optical limit approach. The enhancement of the reaction cross section for~(28)P could be explained by the modified Glauber theory with an enlarged core. Theoretical ana...     

HILBERTIAN INVARIANCE PRINCIPLE FOR EMPIRICAL PROCESS ASSOCIATED WITH A MARKOV PROCESS

The authors establish the Hilbertian invariance principle for the empirical process of a stationary Markov process, by extending the forward-backward martingale decomposition of Lyons-Meyer-Zheng to the Hilbert space valued additive functionals associated with general non-reversible Markov processes.     

N[a,b]类中边界Nevanlinna-Pick插值(I)

用所谓的Hankel向量方法求解N[a,b]函数类中带边界插值数据的Nevanlina-Pick插值(BNP(N[a,b]))问题,并建立BNP(N[a,b])问题与[a,b]上的某种带约束条件的Hausdorff矩量问题之间等价的可解条件以及解之间明确的一一对应关系.这使得当BNP(N[a,b])问题有多解时,能通过带约束条件的矩量问题的可解性准则和解获得BNP(N[a,b])问题的可解性准则和解的参数化描述,而在唯一解的情况下,通过BNP(N[a,b])问题解的存在唯一性准则和唯一解来获得带约束条件的     

-混合序列的不变原理

给出一类较广泛的ρ-混合序列 ,并证明了在一定的矩条件下 ,ρ-混合序列的不变原理成立     

北京同步辐射装置3B1B生物光谱实验站

本文介绍北京同步辐射装置（ＢＳＲＦ）３Ｂ１Ｂ光束线、生物光谱实验站和圆二色谱仪的基本情况。报道北京正负电子对撞机（ＢＥＰＣ）同步辐射专用光期间，我们在站测量了１１种手征性生物和药物样品的圆二色（ＣＤ）谱，首次在国内利用同步辐射光获取了Ｄ－苯丙氨酸等样品的ＣＤ谱和Ｄ－及Ｌ－亮氨酸对称的ＣＤ曲线。     

�˻����/ͭ�ȵȾ�ѹ��ɢ���ӽ����Ӱ��

As the ITER first wall Be/CuCrZr hot isostatic pressing (HIP) bonding intermediate transition layer, Ti/Cu layer can form a multi-layer intermediate metal phase, and defects such as cracks occur between the Ti/Cu metal phases. CuCrZr was used instead of Be, and a number of CuCrZr/Ti/Cu/CuCrZr joints were fabricated by the same HIP process as Be/CuCrZr to analyze the Ti/Cu joints. The effects of stress relief annealing on joint strength and defect distribution of the joints unannealed, annealed at 400°C and 500°C respectively were studied. The results show that three layers of Ti/Cu diffusion layers are formed on both sides of the intermediate titanium layer, namely Cu₄Ti, CuTi and CuTi₂. The thickness of Cu₄Ti on the pure copper side is thicker than that on the CuCrZr side, so that the crack is almost entirely distributed at the junction of Cu₄Ti and CuTi on the pure copper side where brittle fracture is easy to occur in the tensile samples. As the annealing temperature increases, the generation and propagation of cracks decreases.     

KNbO3：Fe晶体的时间微分效应及图像追踪

本文观察到了KNbO_3:Fe晶体的时间微分效应,并用这个微分效应进行了图像追踪的演示,为KNbO_3:Fe晶体在光折变器件领域的应用进行了有益的探索。     

不同倾角的脉管制冷机内自然对流影响的研究

本文通过对脉管内自然对流的数值模拟，讨论了当脉管冷端处在不同方向时，脉管内的自然对流对脉管制冷机性能的影响．数值模拟结果表明，当冷端在下时获得的制冷温度最低；当热端在下并与重力方向成３０°时制冷温度最高．结论与实验测量结果定性一致．所做的理论分析对实现脉管制冷机的良好运行有指导意义。     

Surface Nitridation of Molybdenum by Laser-promoted Reaction

l.IntroductionowingtotheirpromisingproPertiesandPOtentialapplications,transitionmetalni-trideshavedrawngreatattentionandthepreparationandinvestigationofthesecom-poundshavebeenasubjectbothofscientificandoftechnologicalinterest.Transitionmetalnitridescombineadvantagesofexce1lenthardness,highmeltingPOint,goodchemi-calstabilityandhigheIectricalconductivity[11,henceoverlaySofthesecompoundshavefoundwideappIicationsinvariousfie1ds.Molybdenumnitrides,inparticular,havealsoemergedasverypromisingcandi…