A RELATION BETWEEN THE APPARENT VELOCITY AND THE SPECTRAL POWER OF SUPERLUMINAL RADIO SOURCES

It is proved that the apparent transverse velocities β_(app) and the spectral powers at 10GHz P_(10) of the cores of known superluminal sources are correlated. An interpretation ofthis result within the framework of the relativistic jet model shows that the jet Lorentzfactor γ depends on the intrinsic luminosity of the sources. The probable existence of twosubpopulations of the superluminal sources is shown by a linear regression analysis. "Small"sources f i.e. the sources without extended emission or with a distance from the core tothe outer edge of the lobe<20 kpc, show lower β_(app) than the "large" objects; this can beinterpreted as an orientation effect. Since all BL Lac objects belong to the "small" class,this result sheds new light on such a question as why these sources have lower apparent ve-locities than the "classical" superluminal quasars.     

Synthesis of a Mimicking Hybrid of Annonaceous Acetogenin with Steroid for Antitumoral Activity Investigation

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐａｓｔｔｗｏｄｅｃａｄｅｓ ,ａｌａｒｇｅｆａｍｉｌｙｏｆｎａｔｕｒａｌｐｒｏｄｕｃｔｓｎａｍｅｄａｎｎｏｎａｃｅｏｕｓａｃｅｔｏｇｅｎｉｎｓｗｅｒｅｉｓｏｌａｔｅｄａｎｄｃｈａｒａｃｔｅｒｉｚｅｄｂｙｔｈｅｇｌｏｂａｌｒｅｓｅａｒｃｈｅｒｓｆｒｏｍｖａｒｉｏｕｓｓｐｅｃｉｅｓｏｆｔｈｅｐｌａｎｔａｎｎｏｎａｅａｅ .1Ａｍｏｎｇｏｖｅｒ 4 0 0ｍｅｍ ｂｅｒｓ,ｍｏｓｔｏｆｔｈｅｍｗｅｒｅｆｏｕｎｄｔｏｓｈｏｗｐｏｔｅｎｔｃｙｔｏｔｏｘｉｃａｎｄａｎｔｉｔｕｍｏｒａ…     

能量选择中子成像技术及其应用

能量选择中子成像技术是利用特定范围波长(能量)的中子进行成像。在热/冷中子范围内(<25meV),能量选择中子成像技术主要基于布拉格边效应和衍射机制,相比常规中子成像技术不但可以显著提高图像对比度,而且能分析应变、应力、织构。在超热中子范围内(>1eV),能量选择中子成像技术主要基于中子共振吸收,中子截面随能量变化是同位素特有的,存在明显的共振吸收峰,因此可以进行同位素的“指纹”识别。能量选择中子成像技术在工程、材料、化学、物理、生物、考古等众多科研领域中有着非常广阔的应用前景。     

Syntheses,Structures and Photocatalytic Degradation Properties of Two Copper(Ⅱ)Coordination Polymers with Flexible Bis(imidazole)Ligand

Two copper(Ⅱ)coordination polymers{[Cu(bib)(nip)]·1.5H2O}n(1)and[Cu2(bib)(glu)2]n(2)(bib= 1,4-bis(2-methyl-imidazol-1-yl)butane,H2nip = 5-nitroisophthalic acid,...     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

气相生长氮化铝单晶的新方法

通过在钨坩埚盖开小孔的方法改变氮化铝结晶衬底上的温度场分布,在开孔处形成局部低温区;由于孔的几何尺寸的限制和氮化铝晶体生长的各向异性,开孔处的氮化铝晶体单晶化;随后,开孔处的单晶起籽晶的作用,逐渐长成较大尺寸、较高质量的氮化铝单晶.目前用该方法已经制备出直径大于2mm的氮化铝单晶体.     

Determination of Acetonitrile Volume Fraction in Mobile Phase by HPLC

This paper reports the development and validation of an assay for the determination of acetonitrile in the recycled mobile phase using high performance liquid chromatography（HPLC）. The method is based on that the retention in reversed-phase liquid chromatography increases with decreasing concentration of organic phase in the mobile phase. The natural logarithm of the capacity ratio for a given solute is linearly related to the volume fraction of the organic modifier in the mobile phase. For dimethylphthalate and diethylphthalate, the linearity range is 30%--60%, and for biphenyl and terphenyl, the range is 60%--95%. Precision values（RSD） were both 〈1% and the accuracy（RE） was in the range of ±1%. The assay was successfully applied to the determination of acetonitrile concentration of recycled mobile phase after the distillation of the column eluent in our laboratory.     

PVC/MBS/纳米 BaSO4 复合材料的制备及其性能

采用熔融共混法制备聚氯乙烯(PVC)/甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物(MBS)/纳米重晶石(nano-BaSO4)三元复合材料,考察其力学性能和热稳定性能,并用扫描电镜观察冲击断面的形态.结果表明:MBS 与 nano-BaSO4 可协同增韧 PVC;当 MBS、nano-BaSO4 的含量分别为 10%、1%时,材料的韧性和刚性可同时得以改善,其冲击断面表现出典型的韧性断裂特征;热重分析显示添加 1%nano-BaSO4 可显著提高 PVC/MBS 的热稳定性能,其第一降解阶段的初始分解温度和最快分解温度分别提高了 10℃和14℃.     

全球治理困境与国家“再现”的最终逻辑

在全球治理危机频现和大国战略竞争加剧的背景下,“国家中心主义”回归引发了人们对经济全球化走势的担忧。本轮国家中心主义回归的逻辑是：此前自由主义全球化的过度发展导致国家功能隐退;而当全球治理状况恶化时,国家的重要性再度凸现,成为各国社会谋求自我体系安全的唯一“阀门”,民族主义、保护主义思潮亦大行其道。从中期看,未来的全球体系重建过程将充满国家中心主义与自由主义两种理性的持续角力,国家与市场的作用都将在“拉锯战”相互影响与重塑。从远期看,新型全球化将是国家与市场关系再平衡的产物,国家仍是兼具服务本民族发展及其外部性的主要工具。国家处理内外发展与治理多重挑战的“灵活度”即为评判其核心竞争力的最终标准。     

Effects of the laser surface treatment on the mechanical properties of CuZr-based bulk metallic glasses

Surfaces of three types of CuZr-based bulk metallic glasses (BMGs) were modified by laser surface treatment (LST), and the influence of the treatment on structure and mechanical properties of these alloys was investigated. The phase structure of as-cast and laser-treated samples was characterized by XRD and the morphology of the alloys after fracture was examined by SEM. The compressive plasticity of treated Cu47.5Zr47.5Al5 and Cu46.5Zr47.5Al5Co1 BMGs can be improved from 0.5% to 2.0% and from 1.2% to 5.7% respectively compared with the as-cast ones, while (Cu0.55Zr0.40Al0.05)99Er1 BMG shows insignificant change of plasticity. The improvement in plasticity is attributed to induced crystallization of B2 CuZr phase in the treated surface zone of selected metallic glasses.