Nanoscale-confined crystallization in epoxy resin and polyethylene-block-poly(ethylene oxide) diblock copolymer blends

In this paper, the nanoscale-confined crystallization behavior and crystallization kinetics in blends of double-crystalline polyethylene-block-poly(ethylene oxide) (PE-b-PEO) diblock copolymer with diglycidyl ether of bisphenol A epoxy resin were investigated. The results showed that there appeared three crystallization regimes related to the crystallization of the PE block within three different microenvironments in the epoxy resin/PE-b-PEO blends. The Avrami index n is around 1.8–2.4, suggesting PE block of the copolymer in the blends exhibited nanoscale-confined crystallization behavior by homogeneous nucleation. The PE block nanoscale-confined crystallization is ascribed to the formation of the strong intermolecular hydrogen bonding interaction between hydroxyl groups of amine-cured epoxy and ether oxygen atoms of PEO, as seen from Fourier transform infrared spectroscopy spectra.     

Combined effect of modified zeolite 13X and β-nucleating agent on improving β-crystal content and toughening polypropylene random copolymer

Although addition of β-NUCLEATING agent directly into homo-polypropylene(PPH) is a useful method to improve β-CRYSTAL content and toughen PPH, polypropylene random copolymer(PPR) makes this method powerless due to its random structure and low crystallinity. In this study, the-nucleated PPR with high β-CRYSTAL content was prepared by a novel high effective β-NUCLEATING system which consists of-nucleation agent(TMB-5) and modified zeolite 13X(M13X). It was found that M13X and TMB-5 had a synergistic influence on improving β-CRYSTAL content and toughening PPR. The content of β-CRYSTAL in PPR/M13X/TMB-5 was significantly larger than the sum of that in PPR/M13X and PPR/TMB-5. Besides,fracture behavior, phase morphology and relaxation of matrix chain segments were also investigated. The results showed that M13X and TMB-5 improved the mobility of amorphous chain segments at low temperature and contributed to much energy dissipation. This work provides a powerful method to modify PPR.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Covalent Organic Frameworks(COFs) for Sequestration of99TcO4–

Covalent organic frameworks(COFs), as a class of crystalline porous materials with periodic lattices and porous structures, have received extensive attention in the fields of gas storage and separation, energy storage, catalysis and optoelectronics and so on. However, COFs are still in their infancy in the field of nuclear waste treatment, especially for sequestration of long-live problematic radionuclides, such as ⁹⁹Tc. Battle of decontamination of pertechnetate(TcO₄^–), a main existence of ⁹⁹Tc under aerobic environments, is far from finished. In this review, recent progresses of COFs and some relative materials in the sequestration of pertechnetate, and perspective on surmounting the unmet issues are elucidated.     

EDTA辅助水热法制备性能优异的棒状LiFePO4/C材料

以乙二胺四乙酸为配位剂采用水热法制备了棒状LiFePO₄/C材料。采用X射线衍射、扫描电镜、透射电镜、循环伏安、交流阻抗和恒电流充放电测试等对材料进行表征。结果表明:乙二胺四乙酸对材料的形貌和电性能均有很大影响。通过加入乙二胺四乙酸, 材料的形貌由不规则的颗粒变为棒状的颗粒且颗粒的厚度由140~200 nm减少至40~90 nm, 材料的表面包覆约3.5 nm的均匀碳层, 且该材料极化较小且界面阻抗较低。0.1C放电比容量为167 mAh·g^-1(接近理论容量170 mAh·g^-1)。     

酒石酸铅锆的制备、表征及其燃烧催化作用

以酒石酸、硝酸氧锆和硝酸铅为原料,合成出了双金属盐酒石酸铅锆,采用有机元素分析、X射线荧光光谱和FTIR对其进行了表征。在程序升温条件下,利用TG/DTG、DSC、固相原位反应池/FTIR联用技术,研究了酒石酸铅锆的热行为和热分解机理,描述了酒石酸铅锆的热分解过程,分析得出其最终分解产物为ZrO2、PbO和C。利用螺压工艺制备了含酒石酸铅锆的推进剂样品,研究了酒石酸铅锆对双基系推进剂燃烧性能的影响,分析了其燃烧催化作用。结果表明,酒石酸铅锆对双基系推进剂的燃烧具有良好的催化作用,是一种高效的燃烧催化剂;酒石酸铅锆热分解的最终产物PbO是催化燃烧的主要活性物质,推进剂燃烧过程中形成了氧化铅-铅循环催化体系,而锆和碳则起辅助催化的作用。     

Removal of carbonyl sulfide from CO2 stream using AgNO3-modified NaZSM-5

Removal of carbonyl sulfide (COS) from CO₂ stream is significant for the production and utilization of food grade CO₂. This study investigates the adsorption performance of Ag/NaZSM-5 as adsorbent prepared by incipient wetness impregnation for the removal of COS from a CO₂ stream in a fixed-bed adsorption apparatus. Effects of various conditions on the preparation of adsorbent, adsorption and desorption were intensively examined. The results revealed that COS can be removed to below 1×10^?9 from a CO₂ stream (1000 ppm COS/CO₂) using Ag/NaZSM-5 (10 wt% AgNO₃) with an adsorption capacity of 12.86 mg-g^?1. The adsorbent can be fully regenerated using hot air at 450 °C. The adsorption ability remained stable even after eight cycles of regeneration.     

Synthesis,isolation and characterization of methyl levulinate from cellulose catalyzed by extremely low concentration acid

A direct synthesis of methyl levulinate from cellulose alcoholysis in methanol medium under mild condition (180–210 °C) catalyzed by extremely low concentration sulfuric acid (≤0.01 mol/L) and the product isolation were developed in this study. Effects of different process variables towards the catalytic performance were performed as a function of reaction time. The results indicated that sulfuric acid concentration, temperature and initial cellulose concentration had significant effects on the synthesis of methyl levulinate. An optimized yield of around 50% was achieved at 210 °C for 120 min with sulfuric acid concentration of 0.01 mol/L and initial cellulose concentration below 100 g/L. The resulting product mixture was isolated by a distillation technique that combines an atmospheric distillation with a vacuum distillation where n-dodecane was added to help distill the heavy fraction. The light fraction including mainly methanol could be reused as the reaction medium without any substantial change in the yield of methyl levulinate. The chemical composition and structural of lower heavy fraction were characterized by GC/MS, FTIR, ¹H-NMR and ¹³C-NMR techniques. Methyl levulinate was found to be a major ingredient of lower heavy fraction with the content over 96%. This pathway is efficient, environmentally benign and economical for the production of pure levulinate esters from cellulose.     

A simple microextraction and preconcentration approach based on a mixed matrix membrane

A simple adsorption/desorption procedure using a mixed matrix membrane (MMM) as extraction medium is demonstrated as a new miniaturized sample pretreatment and preconcentration technique. Reversed-phase particles namely polymeric bonded octadecyl (C₁₈) was incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a C₁₈-MMM. Non-steroidal anti-inflammatory drugs (NSAIDs) namely diclofenac, mefenamic acid and ibuprofen present in the environmental water samples were selected as targeted model analytes. The extraction setup is simple by dipping a small piece of C₁₈-MMM (7 mm × 7 mm) in a stirred 10 mL sample solution for analyte adsorption process. The entrapped analyte within the membrane was then desorbed into 100 μL of methanol by ultrasonication prior to high performance liquid chromatography (HPLC) analysis. Each membrane was discarded after single use to avoid any analyte carry-over effect. Several important parameters, such as effect of sample pH, salting-out effect, sample volume, extraction time, desorption solvent and desorption time were comprehensively optimized. The C₁₈-MMM demonstrated high affinity for NSAIDs spiked in tap and river water with relative recoveries ranging from 92 to 100% and good reproducibility with relative standard deviations between 1.1 and 5.5% (n = 9). The overall results obtained were found comparable against conventional solid phase extraction (SPE) using cartridge packed with identical C₁₈ adsorbent.     

Prenylated Benzene Metabolites from Melicope pteleifolia

Chemical investigation on the stem and root of Melicope pteleifolia afforded three new prenylated benzene metabolites as racemic mixtures, named pteleifolins A–C ( 1 – 3 , resp.). Their gross structures were elucidated on the basis of spectroscopic analysis, especially 2D‐NMR experiments. An enantiomer resolution of (±)‐ 1 using chiral HPLC was performed, and the absolute configuration of the enantiomers were determined to be (+)‐(S)‐ 1 and (?)‐(R)‐ 1 by means of circular‐dichroism analysis.