Influence of AC Electric Field on Macroscopic Network of Carbon Nanotubes in Polystyrene

CVD‐grown multiwall carbon nanotubes are dispersed in styrene monomer. During the polymerization of styrene, an AC electric field is applied to induce the CNTs to align along the electric field line to form a macroscopic nanotube network in polystyrene matrix. The dielectrophoresis force and the electric field redistribution at the CNTs apexes are responsible for alignment of the CNTs as well as bonding between the CNTs. Parameters such as field strength and nanotube weight fraction are varied. The results indicate that the macroscopic CNTs alignment along electric field direction can be observed only if the AC voltage reaches or is higher than certain values, and the higher the electric field frequency is, the more uniformly the CNTs align along electric field direction. In addition, nanotube concentration also affects the alignment of CNTs. According to the results of this study, the CNTs will align into a developed network in polystyrene matrix under a proper combination of three parameters of the electric field voltage, frequency, and the CNTs concentration.     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

Dispersive liquid–liquid microextraction followed by high-performance liquid chromatography for the determination of three carbamate pesticides in water samples

A simple, rapid and efficient method, dispersive liquid–liquid microextraction (DLLME) in conjunction with high-performance liquid chromatography (HPLC), has been developed for the determination of three carbamate pesticides (methomyl, carbofuran and carbaryl) in water samples. In this extraction process, a mixture of 35 µL chlorobenzene (extraction solvent) and 1.0 mL acetonitrile (disperser solvent) was rapidly injected into the 5.0 mL aqueous sample containing the analytes. After centrifuging (5 min at 4000 rpm), the fine droplets of chlorobenzene were sedimented in the bottom of the conical test tube. Sedimented phase (20 µL) was injected into the HPLC for analysis. Some important parameters, such as kind and volume of extraction and disperser solvent, extraction time and salt addition were investigated and optimised. Under the optimum extraction condition, the enrichment factors and extraction recoveries ranged from 148% to 189% and 74.2% to 94.4%, respectively. The methods yielded a linear range in the concentration from 1 to 1000 µg L^?1 for carbofuran and carbaryl, 5 to 1000 µg L^?1 for methomyl, and the limits of detection were 0.5, 0.9 and 0.1 µg L^?1, respectively. The relative standard deviations (RSD) for the extraction of 500 µg L^?1 carbamate pesticides were in the range of 1.8–4.6% (n = 6). This method could be successfully applied for the determination of carbamate pesticides in tap water, river water and rain water.     

An ionic liquid-based sorbent for solid phase extraction of trace iron(Ш) from biological and natural water samples

A new ionic liquid modified silica gel sorbent was prepared from the reaction of active silica gel with N-3-(-3-triethoxysilylepropyl)-3-methylimidazolium chloride ([(TESP)MIm]Cl). This sorbent was exploited as solid phase extractant for separation and preconcentration of metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). It was found that it can selectively adsorb Fe(Ш). Identification of the surface modification was performed on the basis of FT-IR. Experimental conditions for effective adsorption of trace Fe(Ш) were optimised using both batch and column procedures. At pH 3, Fe(Ш) could be quantitatively adsorbed and completely eluted by using 2?mL of 0.1?mol?L^?1 of HCl. 150?mL of sample solution was adopted as the maximum sample volume and a high enrichment factor of 75 was obtained. Most common coexisting ions did not interfere with the separation and preconcentration of Fe(Ш) at optimal conditions. The maximum static adsorption capacity of the sorbent was 37.0?mg?g^?1. The detection limit of the present method was 0.48?µg?L^?1, and the relative standard deviation (R. S. D.) was lower than 1.7%. The method was successfully applied to the preconcentration of trace Fe(Ш) in biological and natural water samples with satisfactory results.     

稀释蒸汽中Na+及积炭对甲醇制丙烯催化剂性能影响

考察了稀释蒸汽中Na⁺及积炭对甲醇制丙烯(MTP)催化剂物理化学性质和催化性能影响, 及离子交换后催化性能. 采用X射线衍射(XRD)、扫描电镜(SEM)、X射线荧光(XRF)光谱、N₂吸附-脱附、程序升温氨脱附(NH3-TPD)和热重(TG)分析等方法对失活和再生催化剂进行了表征, 并在101325 Pa、470℃ 和甲醇空速(WHSV)为1.0-3.0 h^-1的反应条件下, 采用连续流动固定床微型反应器考察其催化甲醇制丙烯性能. 结果表明: MTP反应970 h后的催化剂晶体结构和形貌没有受到明显破坏, 但稀释蒸汽中Na⁺极易扩散至催化剂表面,部分取代H质子的位置, 从而使催化剂酸性逐渐下降而中毒失活; 另外, MTP催化剂表面的积炭导致分子筛微孔堵塞是造成其失活的主要原因, 可通过烧炭再生过程消除, 而水蒸汽脱铝对催化剂性能的影响缓慢但更严重. 用再生和离子交换处理后, Na⁺中毒催化剂MTP反应性能基本完全恢复. 在470 h反应过程中, 甲醇转化率保持在99%以上, 丙烯选择性大于46%, 且随着反应时间的延长, 丙烯选择性逐渐升高、乙烯选择性逐渐下降.     

AgGa(S1-xSex)2固溶体的电子结构和光学性质

采用基于赝势平面波基组的密度泛函理论方法, 对一系列具有黄铜矿结构的AgGa(S_1-xSe_x)₂固溶体的构型、电子结构、线性和二阶非线性光学性质进行了系统研究. 结果表明, 各固溶体具有类似的能带结构, 体系带隙随x值增加而逐渐减小. 当所引入的Hartree-Fock交换项贡献为22.56%时, 对应的杂化PBE泛函得到的带隙值与实验结果相近. 固溶体的各种光学性质, 包括折射率、双折射率、反射率、吸收系数和二阶倍频系数等均随着组成的改变呈现出有规律的变化趋势, 变化范围介于AgGaS₂和AgGaSe₂二者之间. 因此, 利用固溶体光学性质的变化规律, 可从中寻找出具有特定光学性能的晶体材料.     

Ca0.8-2x(YbxTb0.1Na0.1+x)2xWO4近红外下转换荧光粉水热合成及发光性质

一种在近红外光谱(NIR)区域高效的量子剪裁现象已在Ca0.8-2x(Ybx Tb0.1Na0.1+x)2x WO4(x=0～0.2)荧光粉中得到证实,该量子剪裁通过吸收紫外线光子发射近红外光子,能量传递包括两个协同过程,分别是WO42-基团到Yb3+离子和WO42-基团到Tb3+离子再到Yb3+离子,Yb3+离子的掺杂浓度对荧光粉在可见光和近红外光谱的发光,荧光寿命和量子效率的影响已进行了详细的研究。经计算,量子效率最大达到135.7%。铽与镱共掺钨酸钙的近红外量子剪裁,通过吸收太阳光谱的1个紫外光子到2个1 000 nm光子(2倍光子数增加)的下转化机制实现高效率硅太阳能电池的途径。     

组氨酸、组胺醇和组胺钴(Ⅱ)配合物氧合性能的比较研究

本文用UV-Vis光谱和氧电极法对结构相似的His-Co、Hio-Co、Hit-Co 3组配合物氧合性能进行了对比研究。由配合物光谱随pH变化的A-pH曲线,可知3组配合物均在pH 6.0以后开始发生氧合反应,在pH 6.0～10.0的范围内His-Co有2种氧合物种生成,其他2组配合物均只有1种氧合配合物生成。用等摩尔比法对氧合配合物的组成比进行了测定,得知Co∶His与Co∶Hio的配位比为1∶2,而Co∶Hit为1∶3;在室温水溶液中和pH 7的条件下,用UV-Vis在波长384 nm下分别考察了3组配合物的氧合性能和它们的抗老化能力,结果表明3组配合物在室温水溶液中均可发生氧合反应,但氧合性能有很大差异,His-Co经过110 h累计560次可逆循环,仍然具有5%氧合性能,而Hio、Hit分别经过59次/54 h、5次/10.2 h循环后氧合性能衰减至5%。3组配合物的抗老化能力的大小顺序为:His-Co>>Hio-Co>Hit-Co。研究结果初步说明:三配位原子配体配合物的可逆吸氧性能好于二配位原子配体的配合物,氨基酸配合物优于氨基醇配合物。     

一种在色噪声环境下的信号检测方法

为了抑制蛟龙号载人潜水器水声通信受母船色噪声干扰的影响,本文提出了一种统计匹配滤波器在色噪声环境下使用的新方法,它通过将接收信号映射到一个生成子空间中进行信号检测,可提高输出水声通信信号的信噪比。受客观条件限制,向阳红09船——蛟龙号载人潜水器的试验母船噪声环境比较恶劣,对水声通信产生了较强的干扰。如何在向阳红09船的这种强、色噪声环境下,提升水声同步信号的检测能力,对提高水声通信的可靠性是非常有帮助的。实际采集试验数据分析结果验证了该检测算法比传统匹配滤波器有更强的信号检测能力。