激光二极管点火系统研究进展

综述了激光点火方式、激光二极管点火系统的组成及最新发展。提出了一种激光二极管点火系统结构,描述了各部分的关键技术。介绍了国外在光回路检测、保险与解保险及多路点火方面的研究成果,以及国内在温度控制、光纤芯径对点火阈值功率的影响和激光点火器设计的研究成果。指出了当前激光点火技术在武器装备中的应用和现阶段激光点火遇到的技术难点。     

1 319和1 338 nm双波长Nd:YAG脉冲激光输出实验研究

 根据计算得到的双波长激光振荡的阈值条件,激光实验中对全反镜镀制1 319和1 338 nm的全反膜（其反射率大于99.73%,而对1 064 nm激光的反射率约为7%）;输出镜采用对1 064 nm强谱线95%的高透过率,而对1 319和1 338 nm谱线的透过率分别为34.7%,32.5%,有效抑制了强线1 064 nm振荡,成功实现了1 319和1 338 nm Nd:YAG同时双波长激光脉冲输出。当输入能量为125 J时,1 319和1 338 nm脉冲双波长激光的单脉冲总输出能量为0.89 J,电-光转换效率为0.71%,斜率效率为0.89%。输出的双波长激光的中心波长分别在1 318.8和1 338.2 nm处,谱线宽度（FWHM）分别为0.35和0.48 nm,强度之比为36:44。     

带开口磁环的周期永磁聚焦系统的2维模拟

 由于目前常用的磁聚焦系统设计方法不能直接计算带有非轴对称开口磁环的磁系统,因此在行波管磁系统实验测试基础上,提出了双面带极靴的开口磁环体积等效概念：将开口磁环等效为相等体积磁性材料的2维轴对称磁环,两者都双面带极靴时轴上的磁场值相等。使用2维电磁计算软件FEMM计算了采用该等效模型后的周期磁聚焦系统的轴上磁场值,计算结果与带有开口磁环的实际系统测试值符合良好,两者相差仅3×10^-3 T。该2维等效模型能代替开口磁环进行计算。     

基于神经网络的粗糙表面双向反射分布函数建模

分析粗糙表面双向反射分布函数的测量方法,提出一种使用人工神经网络技术建立目标表面材料双向反射分布函数模型的方法。给出测量样品多个入射角度下的BRDF随散射角变化的曲线,从中选取部分曲线输入到神经网络,使用贝叶斯正则化方法训练网络,最终获取双向反射分布函数和入射角、散射角的映射关系模型。使用网络模型计算参与训练和未参与训练的输入角度的散射分布曲线,与实验测量曲线进行比较,结果表明：建立的模型正确,具有应用价值。     

LED光学特性的测量与研究

采用微型光纤光谱仪测量了LED的峰值波长、半高宽、光强的角分布及不同温度下的LED光谱.通过对LED光学特性的定性、定量测量及探究,有助于学生了解LED的原理和结构、相关特性及测量方法.     

利用新颖高效气体发生装置以氯气氧化法制备高锰酸钾实验设计及效果*

基于一种新颖高效气体发生装置,设计了以氯气为氧化剂,理论产率接近100%的将锰酸钾高效转化为高锰酸钾的实验方案。实验结果表明:使用本设计制备高纯度高锰酸钾,既可保证高锰酸钾的理论转化率,减少歧化反应副产物对纯度的影响,同时得到的副产品次氯酸钠及氯水可用做无机教学实验的基础试剂,符合“循环经济”指导思想。     

Effect of Support on Catalytic Performance of Photothermal Fischer-Tropsch Synthesis to Produce Lower Olefins over Fe5C2-based Catalysts

Photothermal Fischer-Tropsch synthesis(FTS) has been extensively studied, but few reports were focused on systematically exploring the influence of support on catalytic performance. Herein, a series of Fe₅C₂-based catalysts with different supports was fabricated via a one-step wet-chemical method for photothermal conversion of syngas to lower olefins. Under light irradiation, the optimized Fe₅C₂/α-Al₂O₃ catalyst demonstrated remarkable photothermal FTS activity, delivering selectivity to lower olefins of 50.3% with a CO conversion rate of 52.5%. Characterization studies using X-ray diffraction and Mössbauer spectroscopy analysis revealed that the active catalyst mainly contained Fe₅C₂ nanoparticles on α-Al₂O₃ support. It was found that the weak interaction between active phase and α-Al₂O₃ could promote the formation of Fe₅C₂, which contributed to the high selectivity to lower olefins.     

思维导图促进分析化学课堂思政教学的探索——以“酸碱滴定法基本原理”为例

在分析化学课程的教学中,通过充分发掘其中的思政元素,将其与教学内容进行有机结合,达到育人的目的。通过引入思维导图教学法,搭建思政元素与教学内容的桥梁,学生可以快速把握所学知识。通过学生的表现,分析教学效果,存在的问题等,为课堂思政与本科化学教学有机结合提供一定的借鉴。     

Functional sample path properties of subsequence's C-R increments for a Wiener process in Hlder norm

In this paper, with the aid of large deviation formulas established in strong topology of functional space generated by H¨older norm, we discuss the functional sample path properties of subsequence's C-R increments for a Wiener process in H¨older normThe obtained results,generalize the corresponding results of Chen and the classic Strassen's law of iterated logarithm for a Wiener process.     

Design of Functional Carbon Composite Materials for Energy Conversion and Storage

The carbon composite materials have been a research hotspot in the fields of catalysis, energy conversion and so on, because of their features of large structure and morphology variety, good chemical and electrochemical stability, and high electronic conductivity, large specific surface area and rich active sites. This paper summarizes some research progress of carbon composite materials, including assembly methodologies, their structure regulation, properties, and related applications. Moreover, the current challenges and the prospects of these materials are also discussed.