Size-dependent ignition temperature of metallic compounds fabricated by self-propagating high-temperature synthesis

Considering the diffusion reaction at solid interfaces, the ignition temperature of compounds fabricated by self-propagating high-temperature synthesis (SHS) is modelled with the help of size-dependent activation energy. As reactant size decreases, ignition temperature also decreases. This is because of increased contact areas between the reactants and the lowered diffusion barrier, both of which must be calculated specifically for reactants in nanoscale. The model predictions and experimental results are consistent for some metallic compounds.     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Isolation and Structural Study on Carbohydrates from Cynanchum otophyllum and Cynanchum paniculatum

Three new carbohydrates were isolated from the acidic hydrolysis part of the ethyl acetate extract of Cynanchum otophyllum Schneid (Asclepiadaceae) and one new carbohydrate from the ethyl acetate extract of Cynanchum paniculatum Kitagawa. Their structures were determined as methyl 2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranosyl-(1 → 4)-2,6-deoxy-3-O-methyl-β-D-arabino-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranoside (1), ethyl 2,6-dideoxy-3-O-methyl-β-D-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-l-lyxo-hexopyranoside (2), met hyl 2,6-dideoxy-3-O-methyl-α-l-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-β-D-lyxo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-D-arabino-hexopyranoside (3), and 2,6-dideoxy-3-O-methyl-β-D-ribo-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α-d-arabino-hexopyranosyl-(1 → 4)-2,6-dideoxy-3-O-methyl-α -d-arabino-hexopyranose (4), respectively, by spectral methods.     

Experimental investigation on bit-rate-adaptive software synchronous optical sampling

A tunable optical rail is embedded into the cavity of a nonlinear-polarization-rotation(NPR) mode-locked fiber laser to generate a sampling pulse with different repetition frequencies and realize bit-rate-adaptive software synchronous optical sampling.Two ultrashort pulses(20.26677 and 20.22900 MHz) are derived,and a 100-MHz data signal is sampled twice with these pulses based on sum-frequency generation(SFG) in periodically poled lithium niobate(PPLN).The eye diagram is successfully recovered,and an estimated bit rate of 102.22 MHz is derived.This method is feasible for bit rates ranging from 200 MHz to 1 GHz,with <3% relative error.     

Unexpectedly ligand-free copper-catalyzed C–S cross-coupling of benzothiazole with aryl iodides in aqueous solution

A novel synthetic protocol for 2-aminophenyl sulfide derivatives via the reactions of benzothiazole with aryl iodides was reported for the first time. The reactions were catalyzed by CuCl with tetrabutylammonium hydroxide as the base and water as the solvent without ligand at 50 °C or room temperature. A variety of aryl iodides underwent the C–S cross-coupling reaction with benzothiazole to afford smoothly the corresponding products in excellent yield.     

Effect of Vacancy Defects on the Young's Modulus and Fracture Strength of Graphene: A Molecular Dynamics Study

The Young's modulus of graphene with various rectangular and circular vacancy defects is investigated by molecular dynamics simulation. By comparing with the results calculated from an effective spring model, it is demonstrated that the Young's modulus of graphene is largely correlated to the size of vacancy defects perpendicular to the stretching direction. And a linear reduction of Young's modulus with the increasing concentration of mono‐atomic‐vacancy defects (i.e., the slope of ?0.03) is also observed. The fracture behavior of graphene, including the fracture strength, crack initiation and propagation are then studied by the molecular dynamics simulation, the effective spring model, and the quantized fracture mechanics. The blunting effect of vacancy edges is demonstrated, and the characterized crack tip radius of 4.44 Å is observed.     

Efficient synthesis of the C/D rings of atisine-type C20-diterpenoid alkaloids

A bicyclo[2.2.2]octane C/D ring system,with a lactonic ring at C-8 and C-9,of the atisine-type C₂₀-diterpenoid alkaloids,was successfully synthesized,using an oxidative dearomatization/intramolecular Diels-Alder reaction.     

Organophosphine/phosphite‐stabilized silver(I) complexes bearing N‐acetylbenzamide ligand: synthesis,characterization and potential application in metal organic chemical vapor deposition

New N‐silver(I) acetylbenzamide complexes of type L_n?AgNC₉H₈O₂ (L = PPh₃; n = 1, 2a; n = 2, 2b; n = 3, 2c; L = P(OEt)₃; n = 1, 2d; n = 2, 2e; n = 3, 2f) were prepared. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C{H} NMR, ³¹P{H} NMR and IR spectroscopy, respectively. The molecular structure of 2b has been determined by X‐ray single‐crystal analysis in which the silver atom is in a distorted tetrahedral geometry and crystallizes as cis–trans. New N‐silver(I) acetylbenzamide complexes have a four‐membered ring, which could influence their chemical and physical properties and modulate volatility. Metal organic chemical vapor deposition experiments were carried out successfully at 400°C and 450°C using 2e as precursor for the deposition of silver films, respectively. The high‐purity silver film obtained at 400°C is dense and homogeneous. Copyright © 2012 John Wiley & Sons, Ltd.