合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.     

ICP-AES测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量

采用电感耦合等离子体-原子发射光谱法同时测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量.以表征表面调整转化层厚度及钝化膜厚度,采用本方法准确度高、快速简便,经试验结果令人满意.     

Analysis on cohesive crack opening displacement considering the strain softening effect

In order to investigate the crack propagation in quasi-brittle materials like rock, ceramic and concrete, Hillerborg and his co-researchers abstracted the fracture process zone in front of a stress free crack in terms of a “fictitious crack zone”. On the fictitious crack zone, cohesive stresses distribute following a given softening relationship of stress vs. crack opening. Based on the polynomial or power series expression of cohesive crack opening displacement, the relationship of the cohesive stress vs. the crack opening displacement is established using elastic theory and integral equation, and some unknown physics variables are obtained using variation approach. The calculation results gained in this paper are close to the experimentally test ones.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Determination of Trace Mercury by Solid Substrate-Room Temperature Phosphorimetry Quenching Method Based on Catalytic Effect of Hg2+on Formation of the Ion Association Complex [Sn(XO)6]4+·[(Fin)4]

A new method for the determination of trace mercury by solid substrate-room temperature phosphorimetry (SS-RTP) quenching method has been established. In glycine-HCl buffer solution, xylenol orange (XO) can react with Sn⁴⁺ to form the complex [Sn(XO)₆]⁴⁺. [Sn(XO)₆]⁴⁺ can interact with Fin⁻ (fluorescein anion) to form the ion associate [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which can emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM). Hg²⁺ can catalyze H₂O₂ oxidizing the ion association complex [Sn(XO)₆]⁴⁺·[(Fin)₄]⁻, which causes the RTP to quench. The ΔIp value is directly proportional to the concentration of Hg²⁺ in the range of 0.016–1.6 fg spot⁻¹ (corresponding concentration: 0.040–4.0 pg ml⁻¹, 0.40 μl spot⁻¹), and the regression equation of working cure is ΔIp=10.03+83.15 m Hg²⁺ (fg spot⁻¹), (r=0.9987, n=6) and the detection limit (LD) is 3.6 ag spot⁻¹(corresponding concentration: 9.0×10^–15 g ml⁻¹, the sample volume: 0.4 μl). This simple, rapid, accurate method is of high selectivity and good repeatability, and it has been successfully applied to the determination of trace mercury in real samples. The reaction mechanism for catalyzing H₂O₂ oxidizing the ion association complex ([Sn(XO)₆]⁴⁺·[(Fin)₄]⁻) SS-RTP quenching method to determine trace mercury is also discussed.     

空气/水界面水分子的取向和运动

对四种不同的实验构型下空气／水界面自由O-H键在3700cm~(-1)的和频振动光谱的分析表明,水分子在空气／水界面的取向运动只可能是在平衡位置附近有限角度之内的受限转动。界面水分子的自由O-H键取向距界面法线约33°,而取向分布或运动的宽度不超过15°。这一图像显著地不同于Wei等人(Phys. Rev. Lett.86,4799(2001))只通过单一的SFG实验构型所得出结论,即：空气／水界面的水分子在超快的振动弛豫时间内在很大的角度范围内运动。     

铁分子Fe2的自旋极化效应

采用密度泛函方法(B3P86)对 Fe_2分子结构进行了优化.计算结果中未观察到自旋污染,基态波函数与高态波函数并未混杂,结果表明,Fe_2中有8个未配对电子,这些电子空间分布不同和自旋平行产生的自旋极化效应,使 Fe_2能量最低.计算结果表明,Fe_2分子的基态是~9∑_g~ ,并非~7Δ_u,进而表明 Fe_2的自旋平行效应比电子自旋配对效应要强.计算得到该分子基态的二阶、三阶和四阶力常数分别为1.4115×10~(-2)aJ/nm~2、-37.1751×10~3aJ/nm~3和 98.7596×10~4aJ/nm~4；光谱数据ω_eχ_e、B_e、α_e分别为0.3522、0.0345、 0.4963×10~(-4)cm~(-1)；离解能为3.5522eV,平衡键长为0.2137nm,振动频率为292.914cm~(-1)；并得到了 Murrel-Sorbie 函数.     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

自由基CH(X2Π,a4Σ-)的光谱数据从头算研究

用分子轨道从头算方法,对CH自由基的基态(X2Π)和低激发态(a4Σ-)的光谱数据进行了计算.计算结果表明,在基态CH(X2Π)时,在QCISD(T)/6-311G (3df,3pd)水平上,计算所得的键长R=0.1120981nm,偶极矩μ＝1.5891 Debye,ν＝2845.43cm-1均与实验值相吻合,在B3PW91/6-311G (3df,3pd)理论水平上,计算的基态能量为-38.496143 Hartree,误差仅为0.22%;对低激发态CH(a4Σ-),使用含时的密度泛函方法(TDDFT)和大基组6-311 G(3df,3pd)计算所得的R=0.1094nm,垂直跃迁能量为0.926eV,均与实验结果有较好的吻合.