水淬渣-累托石颗粒吸附材料的制备及应用

研究了水淬渣-累托石颗粒吸附材料制备工艺条件、再生方法及其去除铜冶炼工业废水中重金属的条件.试验结果表明,累托石与水淬渣的比例为1∶1,另加入10%的添加剂(IS)和50%的水,焙烧温度为400℃时,制成的颗粒吸附材料体积密度为1.06kg/m3,显气孔率为62.29%,吸水率为58.82%,抗压强度为2.22Mpa,吸附效果好,散失率较低.在未调节铜冶炼工业废水pH值的条件下,颗粒吸附材料用量为0.05g/cm3,反应时间为40min,吸附温度为25℃(常温)时,Cu2 、Pb2 、Zn2 、Cd2 、Ni2 的去除率分别为98.2%、96.3%、78.6%、86.2%、64.2%,处理后的水符合国家污水综合排放标准(GB8978-1996)一级标准.颗粒吸附材料对Zn2 、Cu2 有很好的选择性.吸附饱和的颗粒吸附材料用1mol/L氯化钠溶液再生效果好.该颗粒吸附材料具有分离容易、可重复使用、处理效果好、应用前景广阔的优点.     

取代基对卟吩结构和性质的影响

运用密度泛函理论(DFT) B3LYP/6-31G(d, p)方法, 对卟吩及其被取代基—CH=CH₂、—COCH₃、—CHOHCH₃、—CHNH₂CH₃或—CHSHCH₃所修饰后的分子构型进行了优化. 同时, 对其电子吸收光谱与核磁共振氢谱也进行了量化计算. 结果表明, 这些取代基有着各自不同的空间构象, 对卟吩环的整体结构没有很大的扰动. 然而, 它们重新调整了卟吩环中原子电荷的分布, 改变了前线分子轨道(LUMO-HOMO)能隙, 结果导致卟吩的吸收光谱与¹H NMR均发生了相应的改变.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

甲酰胺在乙二醇-水混合溶剂中的稀释焓

酰胺是肽的基本结构单元, 而且在蛋白质的二级结构中与酰胺联系的氢键对蛋白质的稳定起着十分重要的作用. 作为蛋白质模型化合物热力学性质研究的一部分, 报道了甲酰胺在乙二醇水溶液中的稀释焓.      

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

（H2O）^＋n（n=1,2）的几何结构优化和振动光谱分析

采用Ｈａｒｔｒｅｅ－Ｆｏｃｋ和ＭＰ２方法在多种水平下优化了（Ｈ２Ｏ）＾＋ｎ（ｎ ＝１，２）的几何结构，并进行了振动光谱分析。结果表明：对（Ｈ２Ｏ）＾＋采用ＭＰ２／６－３１１＋＋Ｇ（ｄ，ｐ）可得出最满意的结论。     

壳聚糖浓溶液流变性质研究──分子量的依赖性

series of chitosan samlpes with 91% deacetylation but different molecular weight were obtained by varying the time of chitosan solution in acetic acid aqueous solution at 70℃.The viscosities and flow behavior of the concentrated solutions of chitosan were investigated in 10% (vol%) formic acid aqueous solution after the solutions were prepared for two days by using RPX-705 Rheopexy Analyzer.For each chitosan sample,at the concentration of 3.5 g/100ml,the log (ηr/η0)versus lgγη0,M curves superimpose each other within the same rheogramme. Then the relationship between log nr and lgM was studied under different shear rates.For the highest M sample, the experimental data deviate from the straight lines greatly. This was because the chitosan chain degradated in acid solution during dissolving. The molecular weights were measured in acid solution after two days of dissolving, they were right on their own straight lines. However,no obvious degradation was observed after two days in the same solution for the other lower M chitosan sam-ples. In addition, the plot of nr against M was not a straight line,probaly due to particular interaction of chitosan.     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂