High efficiency top-emitting white organic light-emitting devices with a (metal/organic)2 cathode

White top-emitting organic light-emitting devices (TEOLEDs) were fabricated on a glass substrate with metal/organic multilayer of (Ag/Alq₃)₂ (Alq₃ is tris-(8-hydroxyquinoline) aluminum) as cathode. White TEOLEDs with high efficiency were obtained due to the microcavity effects. And the (Ag/Alq₃)₂ cathode, which adjusted the optical characteristics of the devices, played an important role. In addition, Alq₃–Ag–Alq₃ multilayer could work as a buffer layer, which would simplify the process of encapsulation for devices. We also calculated the electroluminescence spectrum of devices encapsulated with Al₂O₃ (150 nm) and Al₂O₃(75 nm)/ZrO₂(75 nm). And the results indicated that the CIE coordinates is almost the same between with and without encapsulating.     

大功率垂直腔面发射激光器的相干性测量与分析

通过有机化学气象沉积(MOCVD)技术在n型GaAs衬底上生长制作了发射波长为850nm的VCSELs4×4列阵器件,介绍了VCSELs的制作工艺流程.对器件进行了相干性测量,计算了干涉条纹可见度,分析了影响干涉条纹可见度的因素.     

烧结金属纤维板大空间自然对流实验研究

实验研究了烧结金属纤维板在大空间下的自然对流换热,分析了倾角、孔隙率、纤维丝经、Ra数和金属纤维导热系数对换热性能的影响.实验结果表明:存在最优的角度(60°左右)使烧结金属纤维板的自然对流换热性能最好,但倾斜角度对烧结金属纤维板的换热影响没有光板显著;加热面的平均Nu数随着纤维直径和孔隙率的增加均先增加后减小;在实验...     

肾脏热物性测量及低温下细胞形态分析

肾脏热物性参数获取和微观结构的观察,对研究冰温延时保存器官的机理非常重要。采用差示扫描量热仪测量了离体肾脏导热系数、冰点和器官保存液冰点;利用低温显微系统对肾脏组织不同保存温度及不同降温速率等状态条件,做了细胞形态的观察与分析。研究结果认为,鲜活肾脏导热系数值对肾脏冷却速率影响较大,同时发现在实验条件范围内较小的降温速率对细胞的损伤较轻。     

同位镀铋膜电极测定爆米花中的痕量铅

采用同位镀铋膜法修饰铂电极,用差分脉冲溶出伏安法对爆米花中痕置铅进行了测定,并优化了实验条件.在优化的实验条件下,分别对2.0×10<'8>-6.0×10<'-7>mol/L和6.0×10<'-7>-1.0×10<'-4>mol/L的pb<'2+>进行了测定,Pb<'2+>溶出峰电流与Pb<'2+>浓度呈良好的线性关系...     

Study of the primordial lithium abundance

Lithium isotopes have attracted an intense interest because the abundance of both 6Li and 6Li from big bang nucleosynthesis (BBN) is one of the puzzles in nuclear astrophysics. Many investigations of both astrophysical observation and nucleosynthesis calculation have been carried out to solve the puzzle, but it is not solved yet. Several nuclear reactions involving lithium have been indirectly measured at China Institute of Atomic Energy, Beijing. The Standard BBN (SBBN) network calculations are then perfo...     

气相中2Ca＋介入N2O与CO, N2O与H2反应的计算研究

本文采用密度泛函理论DFT-UB3LYP方法, 在6-311+G(2d, p)的基组下, 计算研究了气相中Ca+离子介入N2O (1∑+)和CO (1∑+) 与N2O (1∑+) 和 H2 (1∑+g)反应的微观机理. 报道了二重态势能面上各反应物、中间体和过渡态的构型特征及能量, 并用频率分析和内禀反应坐标（IRC）方法对过渡态进行了验证. 计算结果表明,金属离子参与N2O和CO与N2O和H2的反应都分两步进行, 其中Ca+离子对反应N2O (X1∑+) + CO (1∑+)生成N2 (X1∑+g) + CO2 (1∑+g)比较Fe+, Ir+, Pt+等的金属离子有良好的催化作用, 而对反应N2O (X1∑+) + H2 (1∑+g) → N2 (1∑+g) + H2O (1A1) 催化作用不是很好,N2、CaOH+和H是该反应的主要产物,与实验观测结果相符, 并通过对金属离子亲氧性（OA）的计算, 从热力学方面进一步说明主题反应的可行性.     

叶酸靶向复合脂质体中阿霉素和维拉帕米含量的测定

建立叶酸靶向复合脂质体中阿霉素和维拉帕米含量测定的反相高效液相色谱法。阿霉素在0.5—60μg/mL范围内呈良好线性关系,平均回收率97.3%;维拉帕米在1.0—50.0μg/mL范围内呈良好线性关系,平均回收率97.2%。本方法灵敏度高,专属性强,重现性好,操作简便,能准确测定叶酸靶向复合脂质体中阿霉素和维拉帕米的含量。     

ICP-AES测定高含量锌、镉和铜

采用ICP-AES测定高含量锌、镉和铜,选择了最佳仪器工作条件和样品处理方法。在实验优选条件下,对铜镉渣中铜的含量为8%—12%;镉的含量为35%—38%;锌的含量为21%—23%进行了测定。回收率分别为铜99.8%—100.0%,镉98.3%—99.9%,锌99.3%—99.5%。