IPv4/IPv6翻译网关的研究

In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.     

Evolution of Weighted Networks by Duplication-Divergence Mechanism

The duplication and divergence process is ubiquitous in nature and man-made networks. Motivated by the duplication-divergence mechanism which depicts the growth of protein networks, we propose a weighted network model in which topological evolution is coupled with weight dynamics. Large scale numerical results indicate that our model can naturally generate networks with power-law-like distributions of degree, strength and weight. The degree-strength correlation is illustrated as well. These properties are in agreement well with empirical data observed in real-world systems. Furthermore, by altering the retention probability δ, weighted, structured exponential networks are realized.     

Synchronizing Complex Networks by an Adaptive Adjustment Mechanism

We propose an adaptive adjustment mechanism for synchronizing complex networks, in particular for sociological or/and biological systems. We do not take it for granted that a dynamical system is put on isolated nodes and they are coupled with each other by one （or more） variable（s）, as employed in most previous models. As a replacement, we suppose that each node may have any finite number of possible states, and their evolutions with time are determined by their nearest-neighbouring （or even second-nearest-neighbouring, etc） nodes in an adaptive adjustment mechanism. It is found that synchronization can be achieved for almost all connected networks and that the scale-free property can evidently improve the synchronizing speed.     

�˻����/ͭ�ȵȾ�ѹ��ɢ���ӽ����Ӱ��

As the ITER first wall Be/CuCrZr hot isostatic pressing (HIP) bonding intermediate transition layer, Ti/Cu layer can form a multi-layer intermediate metal phase, and defects such as cracks occur between the Ti/Cu metal phases. CuCrZr was used instead of Be, and a number of CuCrZr/Ti/Cu/CuCrZr joints were fabricated by the same HIP process as Be/CuCrZr to analyze the Ti/Cu joints. The effects of stress relief annealing on joint strength and defect distribution of the joints unannealed, annealed at 400°C and 500°C respectively were studied. The results show that three layers of Ti/Cu diffusion layers are formed on both sides of the intermediate titanium layer, namely Cu₄Ti, CuTi and CuTi₂. The thickness of Cu₄Ti on the pure copper side is thicker than that on the CuCrZr side, so that the crack is almost entirely distributed at the junction of Cu₄Ti and CuTi on the pure copper side where brittle fracture is easy to occur in the tensile samples. As the annealing temperature increases, the generation and propagation of cracks decreases.     

光子选通光谱烧孔的全息检测与图像存贮

报道在有机光子选通光谱烧孔材料苯基四苯并卟啉锌/芳晴系统中，进行全息光谱烧孔和图像存贮的实验结果．实验表明全息烧孔极大地提高了光谱孔的检测灵敏度和信噪比．通过全息光子选通光谱烧孔，成功地进行了光子选通型的频率选择的多幅全息图存贮，得到清晰的图像再现 关键词：     

关于(QU)型模糊拓扑群的直积

研究(QU)型模糊拓扑群族直积,证明了任意(QU)型模糊拓扑群族的直积仍是(QU)型模糊拓扑群;研究了(QU)型模糊拓扑群族直积的模糊单位元之重域基的结构,得到了(QU)型模糊拓扑群族直积的一些重要性质.     

双组元姿控发动机反流特性的DSMC模拟

为准确获得双组元姿控发动机的羽流及其反流特性,采用直接模拟蒙特卡罗(DSMC)方法结合可变软球(VSS)模型数值模拟以N2O4/MMH为推进剂的真空羽流。喷口参数由喷管流动的DSMC法计算得到。与文献比较表明本文计算程序可信。模拟结果表明,分子质量越小的气体越容易进入反流区;本文的计算条件下,在偏离X轴正向116°~140°范围内,组分数密度和质量流率以及温度均出现了最大值。     

质子滴线区新的缓发质子先驱核121Ce

藉助核反应⁹²Mo(³²S ,3n)产生了未知的缓发质子先驱核¹²¹Ce ,并利用氦喷嘴快速带传输系统和“p-γ”符合方法对它进行了鉴别 .测定了¹²¹Ce的半衰期 ( 1.1±0 .1 )s,观测了它的β缓发质子能谱 ,粗略地估计了它的β缓发质子衰变道的分支比约为1% .首次观测了先驱核¹¹⁹Ba,¹²¹Ba和¹²²La经过β缓发衰变在“子核”中产生的低位能级到基态的γ 跃迁.     

锡(Ⅳ)-偶氮邻苯二酚苯基荧光酮-吐温-80体系分光光度法测定岩石中微量锡

pH值在7.0-8.5的范围内，锡与偶氮邻苯二酚苯基荧光酮、吐温－80形成络合物，其最大吸收峰556nm，摩尔吸光系数2.9×10^5L·mol^-1·cm^-1，锡的含量在0－6μg/25mL范围内遵守比耳定律，本方法对干扰离子的影响和消除进行了研究，本方法已被用于岩石样中锡的测定，结果满意。     

氩等离子体物态方程的TF简化模型

对于高温高压下氩等离子体的电离度和物态方程,本文给出了一种基于Thomas-Feimi(TF)统计模型的简化计算新方法:首先将TF模型电离势的数值结果进行函数逼近,给出一个便于数值求解的计算电离度的近似计算方法,并由此计算了局部热动平衡下的氩等离子体在10～1000 eV高温范围内的物态方程.计算结果与国外报道的其他几种理论模型的计算结果均符合很好,与实验值也吻合较好.本文所提出的简单模型也适用于计算混合物物态方程,可以在电磁发射技术领域中的强电离等离子体中有更为广阔的应用前景.