PICOSECOND LASER SPECTROSCOPY AND OPTICALLY DETECTED MAGNETIC RESONANCE ON A MODEL PHOTOSYNTHETIC SYSTEM

Fluorescence-detected magnetic resonance of triplets in zero magnetic field (FDMR), fluorescence fading (FF) due to triplet-formation, both at 4.2 K, and prompt fluorescence decay kinetics (FDK) at room temperature have been measured for free pheophorbide- a (f-Pheo) and bound (b-Pheo) to a synthetic polypeptide (L-L ys -L-A la -L-A la )_n, dissolved in dimethylformamide (DMF). Fluorescence decay kinetics measurements of f-Pheo in DMF yielded 1-5 ns lifetimes, for b-Pheo in DMF a ~ 50 ps decay-component was found emitting at 730–750 nm. Zero-field splitting parameters |D| and |E| of the lowest triplet state T₁ were determined from FDMR spectra as (337 and 24) 10^-4 cm^-1 for f-Pheo and (359 and 25) 10^-4 cm^-1 for b-Pheo, both in DMF. Decay rate constants of the three spin levels of T¹ of b-Pheo ( K _x= 1200 50 s^-1, k _y= 440 25 s^-1, k _z= 80 5 s^-1) and relative steady-state populations (N_x= 28 2%, N_y= 47 2%, N_z= 26 2%) determined from FF curves predict a fluorescence decrease at the D–E and D + E FDMR transitions, whereas experimentally a fluorescence increase is observed. The FDMR sign-inversion results from singlet-singlet energy transfer from b-Pheo monomers to their aggregates, followed by fast intersystem crossing to T₁. These results indicate that aggregates are formed by two or more b-Pheo molecules at different positions on the folded polypeptide chain. This situation resembles that in chlorophyll-proteins, containing low-lying traps, resulting from interaction of chromophores with other chromophores and with the protein environment.     

Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.     

7-azasteroid analogues—I

Although 7-methoxy- and 6,7-dimethoxy-2-methyl-4-vinyl-isocarbostyrils could not be isolated and characterised, they have been generated in situ and shown to undergo cyclo-addition reactions with typical dienophiles. The enol acetate of 2-methyl-4-acetylisocarbostyril has also been trapped as its adduct with maleic anhydride and with p-benzoquinone.     

Trends in the CNDO/2 molecular orbital study of electronic structure in some neurotransmitter drugs

An investigation of electronic structure in some neurotransmitter drugs has been made using the CNDO/2 semi-empirical molecular orbital method.The electronic structure has been conveniently characterized by the electronic parameters nett atomic population (NAP) and bond index (BI). A variation of these electronic parameters with respect to conformation has been studied and has been found unlikely to exceed 0.1 e in most. cases. Further, the useful extent to which the electronic parameters of some commonly occurring functional groups may be regarded as conformationally invariant has been demonstrated. Also presented are (i) a discussion on the intramolecular close-approach of functional groups — the interaction between terminal —COO^? and ?NH₃⁺ groups of α-ω anaino acids is explicitly considered; (ii) an enquiry into the extension of ‘standard’ (idealized) geometry models in the elucidation of electronic structure.The implication of the results and observations presented here are briefly discussed with reference to classical and quantum structure-activity studies of drug molecules.     

Experimental verification of a predicted, previously unseen separation selectivity pattern in the capillary electrophoretic separation of noncharged enantiomers by octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin

The capillary electrophoretic separation of noncharged enantiomers with single-isomer anionic resolving agents is reexamined here with the help of the charged resolving agent migration model. Two general model parameters have been identified that influence the effective mobility, separation selectivity and mobility difference curves of the enantiomers: parameter b, called binding selectivity (K(RCD)/K(SCD)), and parameter s, called size selectivity (mu(o)RCD/mu(o)SCD). Analysis of the model in terms of these parameters indicates that in addition to the known, previously observed separation selectivity vs. resolving agent concentration patterns, a new pattern, increasing separation selectivity with increasing resolving agent concentration, is also possible provided that (i) K(RCD)/K(SCD)<1 and mu(o)RCD/mu(o)SCD>1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)>1, or (ii) K(RCD)/ K(SCD)>1 and mu(o)SCD/mu(o)SCD<1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)<1. This hitherto unseen separation selectivity pattern was experimentally verified during the capillary electrophoretic separation of the enantiomers of O-isopropyl p-nitrophenyl methylphosphonate with the single-isomer octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin as resolving agent.     

Penetration into three-dimensional complex porous structures

The short-term uptake of a fluid by porous media is important in a number of processes, such as in coating and printing operations. We present a new model to predict short-term absorption into real pore geometries taking into account fluid properties, surface forces, and the complex pore geometry. Two assumptions are made to reduce the complexity of the situation: (1) the flow resistance between pores can be estimated from pore geometry or air permeability measurements, and (2) the volume of fluid in the constrictions between pores is small. Pores can be connected in any manner and can be in any arrangement. The absorption rates predicted by the model are compared to experimental values obtained with coating layers of plastic, kaolin, and calcium carbonate pigments. These coatings are characterized in terms of void fraction, pore size, contact angle, and permeability. The comparison is good for water and inks when the air permeability of the porous layer is used to determine the average resistance to flow in the sample. These resistance values are close to the values obtained from pore geometries estimated from particle packing simulations.     

Use of stable isotope labeling technique and mass isotopomer distribution analysis of [(13)C]palmitate isolated from surfactant disaturated phospholipids to study surfactant in vivo kinetics in a premature infant

Pulmonary surfactant is a complex mixture of phospholipids and proteins which lowers surface tension and maintains alveolar expansion at end expiration. Developmental and genetic disruption of pulmonary surfactant metabolism leads to respiratory distress in newborns. Stable isotope labeling of metabolic precursors of disaturated phospholipids, the most abundant and specific component of pulmonary surfactant, permits the measurement of the kinetics of surfactant metabolism in vivo. We measured [U-(13)C(6)]glucose incorporation into palmitic acid derived from disaturated surfactant phospholipids. A 24 h infusion of [U-(13)C(6)]glucose (140 mg kg(-1)) was administered to a premature infant who required mechanical ventilation for respiratory distress syndrome; tracheal aspirate samples were obtained at the start of the infusion and at regular intervals for the next 70 h. Each tracheal aspirate sample was incubated with osmium tetroxide to isolate disaturated surfactant phospholipids. Methyl esters of the fatty acids in the disaturated phospholipids were prepared and the enrichment of [(13)C]methyl palmitate was measured by gas chromatography/mass spectrometry (GC/MS) and gas chromatography/combination/isotope ratio mass spectrometry (GC/C/IRMS). Mass isotopomer distribution analysis (MIDA) was used to calculate the fractional synthetic rate (FSR) of palmitate synthesized from acetate. With both GC/MS and GC/C/IRMS, palmitate (13)C enrichment was first detected 12.3 h after the start of the tracer infusion. The enrichment increased in a linear fashion, reached a peak at 47 h and remained constant in the remainder of the samples. The FSR of palmitate from acetate was 5.2% per day. Stable isotope techniques and MIDA will provide insights into the kinetics of surfactant metabolism in newborns with respiratory dysfunction.     

Determination of buprenorphine by high-performance liquid chromatography with fluorescence detection: application to human and rabbit pharmacokinetic studies.

A rapid, sensitive, precise and accurate high-performance liquid chromatographic assay with fluorescence detection was developed for the determination of buprenorphine in human, rabbit, pig and dog plasma. It is comprised of only a one-step extraction procedure with hexane-isoamyl alcohol at pH 9.25 and reversed-phase chromatography on a muPorasil column. The recoveries of buprenorphine and nalbuphine (internal standard) were greater than 90%. Calibration graphs were linear over the concentration range 3-300 ng/ml with a coefficient of variation, both within-day and between-day, of less than 9% at any level. The limit of detection was 1.0 ng/ml of plasma based on a signal-to-noise ratio of 3. Eight other clinically used narcotics were investigated to check for potential interferences and their analytical conditions. The possible decomposed compounds of buprenorphine were also checked for the specificity of this assay. The method has been successfully applied to the stability and pharmacokinetic studies of buprenorphine. Buprenorphine in plasma did not decompose significantly at -20 degrees C for four weeks. Pharmacokinetic application in six rabbits and a surgical patient revealed that buprenorphine followed a linear three-compartment model with two distribution phases. The two distribution and elimination half-lives and the clearance of buprenorphine were 1.32, 24.8 and 230 min and 224 ml/min in human plasma, and 0.94, 12.5 and 232 min and 30 ml/min in rabbit plasma.     

An ab initio study of some structural features and the rotational barriers in performic acid,formic acid and hydrogen peroxide

Calculations on performic acid at the 4-31G level, with and without bond functions with complete geometry optimization, and at the (9, 5) level, with and without polarization functions and rigid rotation, all give no sign of a well in the potential energy curve for rotation about the O/O bond axis in the region of 50° – 90° ; and all but the unaugmented 4-31G basis set find the cis-cis planar conformer to be the most stable form. Calculations at the (9,5) level with rigid rotation find the energies of the other planar conformers, relative to the cis-cis conformer, to be 0.94, 1.50 and 14.80 kcal mol^?1 for the trans-trans, cis-trans and trans-cis structures respectively. These energies and also that for the barrier separating the cis-cis and cis-trans conformers, 1–2 kcal mol^?1, are discussed in relation to corresponding data for formic acid, hydrogen peroxide and several planar four heavy-atom molecules. Dipole moment calculations using the same basis sets would seem to favor a skew conformation as the most stable for performic acid, but comparisons between calculated and experimental values for formic acid and for hydrogen peroxide cast doubt on the validity of such results.     

Ring expansion and hydrogen scrambling in the molecular ion of 3-methylthiophene

The ratio [M ? D]/{[M-D] + [M ? H]} in the 70 eV mass spectra of six deuterated 3-methylthiophenes has been determined. From these values the mole fractions of the molecular ions that lose hydrogen atoms specifically from the various positions of the molecule were calculated, as well as the mole fraction in which the hydrogen atoms are fully scrambled before hydrogen elimination. It appears that hydrogen atoms are mainly lost from a fully scrambled [C₅H₆S]⁺· ion and from the α-position of the original molecular ion. A deuterium isotope effect of 1·60 to 1·72 was calculated for the hydrogen elimination. The reaction was also studied at low electron energies. In order to determine the degree of scrambling in the [C₅H₅S]⁺ ions, some decomposition reactions of this ion were investigated.