Thermoplastic polyurethanes containing 12-hydroxymethylabietanol

Thermoplastic polyurethane elastomers incorporating the resin acid-derived 12-hydroxymethylabietanol (12-HMA) were prepared, and some physical properties are reported. A polyester macroglycol was prepared from 12-HMA, adipic acid, and ethylene glycol. This macroglycol then was combined with either poly(tetramethylene adipate) glycol (PTAd) or poly(ethylene adipate) glycol (PEAd) and 1,4-butanediol to give a glycol blend of 300 average hydroxyl equivalent weight (OHE). The glycol mixture then was combined with diphenylmethane 4,4′-diisocyanate (MDI) (NCO/OH = 1.0) to give urethane polymers soluble in tetrahydrofuran. Polymers were prepared with 0, 5, 10, 15, 20, and 25%, by weight, 12-HMA with PTAd as the other macroglycol and with 0, 10, 15, and 20% 12-HMA with PEAd as the other macroglycol. At 15% 12-HMA, polymers were made from glycol mixtures having 275 and 350 average OHE to demonstrate the effect of changing the hard-segment concentration. The presence of 12-HMA is shown to have its maximum effect on tensile properties at 15–20% in the PTAd series and at 10% in the PEAd series. In general, this effect is an increase in tensile strength and modulus and a decrease in elongation when compared with a similar polymer without the 12-HMA.     

Synthesis of four diastereomeric 3,5-dialkoxy-2,4-dimethylalkanals by a simple extension of the non-aldol aldol process to bis(propionates)

[formula: see text] The synthesis of all four diastereomers of bis(propionates), 3,5-dialkoxy-2,4-dimethylalkanals, by non-aldol aldol chemistry is described. The epoxy alcohols (3, 4) were converted into the mesylates (9, 11) which were cleanly rearranged to the desired 3,5-bis(oxygenated)-2,4-dimethylalkanals (10, 12) in high yield. The epoxy mesylates (13, 16) gave the desired products (14, 17) in good yield on treatment with TMSOTf and a hindered base.     

Chiral discrimination of limonene by use of beta-cyclodextrin-coated quartz-crystal-microbalances (QCMs) and data evaluation by artificial neuronal networks

The enantiomeric composition of the chiral flavoring agent limonene was analyzed by means of a quartz-crystal microbalance (QCM) sensor. As chiral selectors three different modified beta-cyclodextrins were investigated. The selector molecules were applied as mixtures in different polysiloxane matrices. The chiral separation factors alpha for limonene obtained at 30 degrees C by gas chromatography and by use of the QCM sensor were comparable. Evaluation of sensor data was performed by use of an artificial neuronal network (ANN); this enabled prediction of the enantiomeric composition of the gas mixtures.     

Selective initiation of nonconjugated dienes containing electron donor–electron acceptor systems. II. Polymerization studies of vinyl ether–β-nitrostyrenes

The monomer series, o-, m-, and p-(2-vinyloxyethoxy)-β-nitrostyrenes, was studied. All three monomers were selectively polymerized through the electron-donating vinyloxy group via cationic initiation. The linear polymers from the meta and para isomers containing the electron-accepting nitrovinyl group were readily crosslinked via anionic initiation. The polymer derived from the ortho isomer was not crosslinked by this mechanism, an observation in accord with results previously reported from these laboratories in which it was shown that all o-substituted-β-nitrostyrenes having ortho substituents larger than fluorine exhibited a sterically inhibited propagation step. The meta and para isomers of this series were selectively polymerized through the electron-accepting nitrovinyl group via anionic initiation. Because of the fact that the resulting polymers were soluble only in highly polar solvents, subsequent crosslinking of these polymers via cationic initiation could not be accomplished. However, these polymers showed strong tendencies to undergo crosslinking upon long exposure to air. Because of the sterically induced ortho effect referred to above, no significant polymerization occurred in the case of the ortho isomer of this series via anionic initiation. However, it was shown in this case that initiation via the anion was rapid, and that the slow step was propagation.     

Buchbesprechungen

Ohne Zusammenfassung     

Determination of mitomycin C in plasma, serum and urine by high-performance liquid chromatography with ultra-violet and electrochemical detection

The performance of a number of normal phase and reversed-phase systems, with ultraviolet detection at 360 nm, has been investigated with respect to their applicability to pharmacokinetic studies of mitomycin C (MMC). The reversed-phase system developed was also combined with a polarographic detector in order to compare the sensitivity and selectivity of ultraviolet and electrochemical detection. A simple isolation procedure, based on the adsorption of MMC on a non-ionogenic resin, has been developed. The developed assay is applied to a pharmacokinetic study from which some examples are given.