Inhomogeneous configurations of magnetization of ferromagnetic films with biaxial anisotropy

The system of the Landau-Lifshitz equations and magnetostatic equations for a ferromagnetic film with biaxial anisotropy and a Q-factor smaller than unity is reduced to a single scalar equation for the magnetostatic potential. Such a procedure is possible if the magnetization modulation scale in the sample considerably exceeds the characteristic magnetic length. The solutions to this equation describing inhomogeneous periodic magnetic configurations are obtained. The energy analysis of these configurations is carried out.     

Special features of magnetic susceptibility dispersion in nanocrystalline magnets

It is demonstrated theoretically that the initial (both elastic and viscous) magnetic susceptibility components for nanocrystalline magnets caused by the processes of rotations (in the region of linear response) have resonant rather than relaxation character typical already for the susceptibility component caused by displacements of domain boundaries. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 88–92, June, 2007.     

Possible spectroscopic manifestation of the angular group induced bond alteration (AGIBA) effect in toluene

The most obvious consequence of the concept of aromaticity is the common confidence that in aromatic compounds, bond lengths do not alternate and are between typical to the single and double ones. However, in 1994, performing crystal structure investigations of substituted pyridines and their salts, Krygowski and co‐workers have discovered a very surprising angular group induced bond alteration (AGIBA) effect: It appears that some angular substituents, like methoxy or nitrozo groups, can induce bond alternation in aromatic rings. Crystal studies do not allow one to operate with liquids that are more common in organic chemistry. This paper presents the first possible evidence of spectroscopic manifestations of the AGIBA effect. Raman spectra of the liquid toluene are analyzed. It is found that instead of being single, the line corresponding to the ring breathing vibrations is clearly split by 1.0–1.4 cm^?1, thus indicating the presence of two (cis‐ and trans‐) AGIBA isomers. The energy difference between these isomers estimated in temperature dependent Raman studies is found equal to 6.68 kJ mol^?1. The low‐wavenumber line therefore corresponds to the cis‐AGIBA isomer and the high‐wavenumber line to the trans‐AGIBA isomer stabilized by the AGIBA effect. Copyright © 2007 John Wiley & Sons, Ltd.     

Study of Fe/Si magnetic layered nanostructures by reflected electron energy loss spectroscopy

The results of studying Fe/Si and Si/Fe layered structures with different thicknesses of the top layer by reflected electron energy loss spectroscopy are presented. A new method is proposed for the estimation of volume fractions of components in binary systems within the framework of the effective dielectric medium model.     

Electron-beam-induced conductivity and color cathodoluminescence of natural diamond plates in scanning electron microscope

Surfaces of natural type-IIa diamond plates used in ionizing-radiation detectors are studied in a scanning electron microscope using techniques of electron-beam-induced conductivity at different bias voltages and real-color cathodoluminescence.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Recovery of Butadiene-Styrene Rubber from Latex at Low Temperature with Various Coagulants

The influence of the charge of a metal cation and the nature of a coagulant on the recovery of butadiene-styrene rubber and properties of rubber stocks and vulcanizates was examined.     

Reduction of nonholonomic variation problems to isoperimetric ones and connections in principal bundles

Translated from Matematicheskie Zametki, Vol. 49, No. 5, pp. 37–44, May, 1991.