Diode pumped active-mirror Yb:YAG ceramic lasers

Lasers from Yb:YAG ceramic at different temperature were reported in this paper. The Yb:YAG ceramic laser with active-mirror structure was end-pumped by a laser diode whose central wavelength was 940 nm. At 80 K, with doping concentration of 5 at % Yb:YAG ceramic slab, output energy of 0.68 J at 10 Hz repetition rate was obtained under the pump energy of 2.49 J, corresponding to a slope efficiency of 40% and a conversion efficiency of 27.3%, respectively.     

Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 % latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV–vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S⁻²) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S⁻²) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S⁻²) ions.     

Coupled-channel analysis for 20.4 MeV energy of p-<Superscript>64</Superscript>Zn inelastic scattering

In this study, a coupled-channel (CC) analysis of the elastic and the inelastic scattering of 20.4 MeV polarized protons from a ⁶⁴Zn target leading to the deformed 2⁺, 3−, 2₂⁺2_2^+ states was performed. The CC potential parameters and the deformation parameters of the excited states corresponding to the best fit to the experimental differential cross-sections and the analysing powers data were determined. For 2₂⁺2_2^+ excited state, a mixed type was used and a good fit to the data was provided. The CC calculation results were compared to the pure distorted wave Born approximation (DWBA) calculation results which were calculated using the new parameters. All calculations were conducted using the computer code ECIS06.     

Isomeric states in180Os

Two new isomers have been observed in¹⁸⁰Os. A high-K isomer withI, K ≧20 and a half-life ofT _1/2=12+4 ns have been established. It deexcites via two transitions into the 18⁺ level of the yrare band indicating an unusually smallK-hindrance factor. Evidence for an isomer withI, K>16 and a half-life ofT _1/2=41±10 ns was found. A half-life of 17±3 ns was measured for the previously known 7^? state at 1862 keV. The decay scheme of the previously known 7^? isomer at 1928 keV has been extended and a revised version is presented.     

Interaction of slow neutrons with nuclides of scandium,titanium, vanadium and manganese

Total cross section measurements at various neutron energies were performed on metallic and oxide samples of natural Sc, Ti, V, and Mn. By means of the Christiansen filter technique the coherent scattering lengths were determined on natural and isotopically enriched samples of Ti-, V-, and Mn-compounds. From the measured values we deduced the following data:

? the absorption cross sections (at 0.0253 eV in barn) of^natTi (6.43±0.06) and of^natV (5.06±0.04);

? the bound coherent scattering lengths (in fm) of^natTi (?3.370±0.013),⁴⁶Ti (4.72±0.05),⁴⁷Ti (3.53±0.07),⁴⁸Ti (?5.86±0.02),⁴⁹Ti (0.98±0.05),⁵⁰Ti (5.88±0.10),^natV (?0.443±0.014), and Mn (?3.750±0.018);

? the free potential radii (in fm) of Sc (3.60 ±0.10),⁴⁶Ti (3.50±0.10),⁴⁷Ti (3.60±0.10),⁴⁸Ti (3.90±0.10),⁴⁹Ti (4.10 ±0.15),⁵⁰Ti (4.50±0.15),⁵¹V (5.20±0.20), and Mn (6.50±20).

On the basis of the well known resonance parameters in combination with new fits of bound levels the spin state scattering lengths, the spin incoherence, and the obtained potential radii are discussed. Total cross section calculations were performed by multi-level formalism and are compared with the measurements.     

The excitation function of Au + Au in the framework of the (2+1)-fluid model

We present the excitation function of the reaction Au+Au in the frame work of the recently developed (2+1)-fluid model. In the (2+1)-fluid model, it is assumed that two baryonic fluids formed by the projectile and target nucleons produce a third hadronic fluid via inelastic nucleon-nucleon collisions. For this third fluid we use the equation of state of an interacting hadron gas obtained within the relativistic mean field model, including a first order phase transition. The dependence of the pion mean transverse momentum is investigated to observe the predicted plateau in the region of the phase transition of the hadronic matter to the quark-gluon plasma.     

Release of ultrafine particles from three simulated building processes

Building activities are recognised to produce coarse particulate matter but less is known about the release of airborne ultrafine particles (UFPs; those below 100 nm in diameter). For the first time, this study has investigated the release of particles in the 5–560 nm range from three simulated building activities: the crushing of concrete cubes, the demolition of old concrete slabs, and the recycling of concrete debris. A fast response differential mobility spectrometer (Cambustion DMS50) was used to measure particle number concentrations (PNC) and size distributions (PNDs) at a sampling frequency of 10 Hz in a confined laboratory room providing controlled environment and near–steady background PNCs. The sampling point was intentionally kept close to the test samples so that the release of new UFPs during these simulated processes can be quantified. Tri–modal particle size distributions were recorded for all cases, demonstrating different peak diameters in fresh nuclei (<10 nm), nucleation (10–30 nm) and accumulation (30–300 nm) modes for individual activities. The measured background size distributions showed modal peaks at about 13 and 49 nm with average background PNCs ~1.47 × 10⁴ cm⁻³. These background modal peaks shifted towards the larger sizes during the work periods (i.e. actual experiments) and the total PNCs increased between 2 and 17 times over the background PNCs for different activities. After adjusting for background concentrations, the net release of PNCs during cube crushing, slab demolition, and ‘dry’ and ‘wet’ recycling events were measured as ~0.77, 19.1, 22.7 and 1.76 (×10⁴) cm⁻³, respectively. The PNDs were converted into particle mass concentrations (PMCs). While majority of new PNC release was below 100 nm (i.e. UFPs), the bulk of new PMC emissions were constituted by the particles over 100 nm; ~95, 79, 73 and 90% of total PNCs, and ~71, 92, 93 and 91% of total PMCs, for cube crushing, slab demolition, dry recycling and wet recycling, respectively. The results of this study firmly elucidate the release of UFPs and raise a need for further detailed studies and designing health and safety related exposure guidelines for laboratory workplaces and operational building sites.     

Do we know the mass of a black hole? Mass of some cosmological black hole models

Using a cosmological black hole model proposed recently, we have calculated the quasi-local mass of a collapsing structure within a cosmological setting due to different definitions put forward in the last decades to see how similar or different they are. It has been shown that the mass within the horizon follows the familiar Brown–York behavior. It increases, however, outside the horizon again after a short decrease, in contrast to the Schwarzschild case. Further away, near the void, outside the collapsed region, and where the density reaches the background minimum, all the mass definitions roughly coincide. They differ, however, substantially far from it. Generically, we are faced with three different Brown–York mass maxima: near the horizon, around the void between the overdensity region and the background, and another at cosmological distances corresponding to the cosmological horizon. While the latter two maxima are always present, the horizon mass maxima is absent before the onset of the central singularity.     

Measurement of the parity-violating asymmetry in inclusive electroproduction of π- near the Δ0 resonance

The parity-violating (PV) asymmetry of inclusive π- production in electron scattering from a liquid deuterium target was measured at backward angles. The measurement was conducted as a part of the G0 experiment, at a beam energy of 360 MeV. The physics process dominating pion production for these kinematics is quasifree photoproduction off the neutron via the Δ0 resonance. In the context of heavy-baryon chiral perturbation theory, this asymmetry is related to a low-energy constant d(Δ)- that characterizes the parity-violating γNΔ coupling. Zhu et al. calculated d(Δ)- in a model benchmarked by the large asymmetries seen in hyperon weak radiative decays, and predicted potentially large asymmetries for this process, ranging from A(γ)-=-5.2 to +5.2 ppm. The measurement performed in this work leads to A(γ)-=-0.36±1.06±0.37±0.03 ppm (where sources of statistical, systematic and theoretical uncertainties are included), which would disfavor enchancements considered by Zhu et al. proportional to V(ud)/V(us). The measurement is part of a program of inelastic scattering measurements that were conducted by the G0 experiment, seeking to determine the N-Δ axial transition form factors using PV electron scattering.     

Discharge-driven electric oxygen-iodine laser superlinear enhancement via increasing g0L

The authors report the development of an electric oxygen-iodine laser with higher output using a larger product of gain and gain length, g0L. A factor of 4.4 increase in laser power output on the 1315 nm atomic iodine transition was achieved with a factor of 3 increase in gain length. I(2P1/2) is pumped using energy transferred from O2(a1Δ) produced by flowing a gas mixture of O2-He-NO through three coaxial geometry radio-frequency discharges. Continuous wave (CW) average total laser power of 481 W was extracted with g0L=0.042.