Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Dielectrophoretically aligned GaN nanowire rectifiers

We demonstrate GaN nanowire (NW) current rectifiers which were formed by assembling n-GaN nanowires on a patterned p-Si substrate by means of alternating current (ac) dielectrophoresis. The dielectrophoresis was accomplished at a frequency of 10 kHz with three different ac bias voltages (5, 10, and 15 V_p–p), indicating that the number of aligned GaN nanowires increased with increasing ac bias voltage. The n-GaN NW/p-Si diodes showed well-defined current rectifying behavior with a forward voltage drop of 1.2–1.5 V at a current density of 200 A/cm². We observed that the GaN NW diode functioned well as a half-wave rectifier. PACS 71.20.Nr; 73.40.Cg; 73.40.Ei; 73.40.Kp     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.     

一种新的磷化铟复合沟道高电子迁移率晶体管小信号物理模型

针对磷化铟(InP)复合沟道高电子迁移率晶体管(HEMT)的特点，对常规单沟道HEMT的小信号物理模型进行了修正，提出了一种新的用于复合沟道HEMT的小信号物理模型，用商用器件模拟软件ISE(integrated systems engineering)对其进行了仿真验证，对比了实测和仿真的I-V特性及转移特性曲线，重点研究了在InGaAs/InP双层沟道中考虑量子效应后的电场和电流密度随着不同栅电压的变化趋势，研究结果表明，由于在沟道中存在量子效应，在栅下靠源端低电场区域，电流主要分布在InGaAs沟道 关键词： 高电子迁移率晶体管 复合沟道 物理模型 磷化铟