Observation of spontaneous pattern with six-fold symmetry in disk-shaped ZnO complex microstructures

Using a simple vapor phase transport technique, we have fabricated unique complex disk-shaped ZnO microstructures comprising a small disk coaxially grown on a large one and observed spatially perfect six-fold symmetric patterns. The observed results can be explained based on the spontaneous nanoindentation (NI) effect under the geometric constraints and the explanation can be extended to fathom the growth mechanism of other highly symmetrical ZnO nanostructures. Our results indicate that NI not only can elucidate the mechanical properties of surfaces and thin films but also is an effective approach to fabricate ordered nanostructures with high precision on the location of the building blocks. PACS 81.16.Rf; 81.07.-b; 81.05.Dz     

Effect of nitrogen surface doping on the work function and field emission of hydrogenated amorphous carbon films

The effect of nitrogen surface doping on the electron field emission characteristics of hydrogenated amorphous carbon films was studied. It was found that the emission threshold electric field decreased after nitrogen surface doping which indicated the reduction of the emission barrier at the film surface. It was demonstrated that this improvement arose from the decrease of the effective work function due to the formation of a dipole layer induced by chemical termination and chemical structural change on the film surface. PACS 52.75.Xx; 73.30 +y; 73.61.Jc     

Shape transition from InAs quantum dash to quantum dot on InP(3 1 1)A

We report on the shape transition from InAs quantum dashes to quantum dots (QDs) on lattice-matched GaInAsP on InP(3 1 1)A substrates. InAs quantum dashes develop during chemical-beam epitaxy of 3.2 monolayers InAs, which transform into round InAs QDs by introducing a growth interruption without arsenic flux after InAs deposition. The shape transition is solely attributed to surface properties, i.e., increase of the surface energy and symmetry under arsenic deficient conditions. The round QD shape is maintained during subsequent GaInAsP overgrowth because the reversed shape transition from dot to dash is kinetically hindered by the decreased ad-atom diffusion under arsenic flux.     

An improved synthesis of isonitrosoacetanilides

A novel two-step synthesis of isonitrosoacetanilides [2-(hydroxyimino)-N-phenylacetamides] has been developed, involving the initial acylation of aniline derivatives with 2,2-diacetoxyacetyl chloride, followed by reaction with hydroxylamine hydrochloride. The method works equally well with a variety of different aniline derivatives, including those with poor aqueous solubility and those containing electron rich ortho-substituents, neither of which react well under traditional conditions.     

Synthesis of alkenes from tertiary esters utilizing the triphenylphosphine-iodine system

The treatment of tertiary esters with triphenylphosphine and iodine under mild conditions gives the most stable alkene in good yield. Formates, acetates and trifluoroacetates were studied.     

Control of the block copolymer morphology in templated epoxy thermosets

It has been found that by the addition of low concentrations of an amphiphilic block copolymer to an epoxy resin, novel disordered morphologies can be formed and preserved through curing. This article will focus on characterizing the influence of the block copolymer and casting solvent on the templated morphology achieved in the thermoset sample. The ultimate goal of this work is to determine the parameters that would control the microphase morphology produced. Epoxy resins blended with a series of amphiphilic block copolymers based on hydrogenated polyisoprene (polyethylene-alt-propylene or PEP) and polyethylene oxide (PEO), specifically, were investigated. In this article, the cure-induced order–order phase transition from the spherical to wormlike micelle morphology will also be discussed. It is proposed that the formation of the wormlike micelle structure from the spherical micelle structure is similar to the phase transition behavior that occurs in dilute block copolymer solutions as a function of the influence of the solvent on micelle morphology. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3338–3348, 2007     

A novel specimen for investigating the mechanical behavior of elastomers under multiaxial loading conditions

In this paper we describe the design and manufacture of an axial-torsion test specimen, and provide relationships needed when conducting stress-strain characterization experiments with the specimen. The specimen is a short hollow cylinder of rubber bonded between two steel mounting rings, in which simultaneous axial and shear strains are produced via independently controlled axial and twist displacements. We present calculations for the strain-displacement and stress-load relationships, and strain energy density. These relationships have been established and validated via a combination of analytical and experimental techniques, and finite element analysis. We have investigated the extent and effects of strain and stress field non-uniformity in the test specimen. The specimen design is sufficiently simple that a closed-form expression for the strain-displacement relationship has been successfully developed.     

The Systematics of Muonium Hyperfine Constants

The hyperfine constants for muonium in elemental and binary inorganic solids suggest formation of three different families of defect centre, with distinct electronic structures. The overall range of values, spanning nearly five orders of magnitude, and their correlation with host properties such as band gap and electron affinity, reveal a deep-to-shallow instability which has profound implications for the electrical properties of hydrogen impurity in electronic materials, both semiconducting and dielectric.     

A dynamic finite volume scheme for large-eddy simulation on unstructured grids

In recent years there has been considerable progress in the application of large-eddy simulation (LES) to increasingly complex flow configurations. Nevertheless a lot of fundamental problems still need to be solved in order to apply LES in a reliable way to real engineering problems, where typically finite-volume codes on unstructured meshes are used. A self-adaptive discretisation scheme, in the context of an unstructured finite-volume flow solver, is investigated in the case of isotropic turbulence at infinite Reynolds number. The Smagorinsky and dynamic Smagorinsky sub-grid scale models are considered. A discrete interpolation filter is used for the dynamic model. It is one of the first applications of a filter based on the approach presented by Marsden et al. In this work, an original procedure to impose the filter shape through a specific selection process of the basic filters is also proposed. Satisfactory results are obtained using the self-adaptive scheme for implicit LES. When the scheme is coupled with the sub-grid scale models, the numerical dissipation is shown to be dominant over the sub-grid scale component. Nevertheless the effect of the sub-grid scale models appears to be important and beneficial, improving in particular the energy spectra. A test on fully developed channel flow at Re_τ = 395 is also performed, comparing the non-limited scheme with the self-adaptive scheme for implicit LES. Once again the introduction of the limiter proves to be beneficial.