Photoinduced electron transfer in Langmuir-Blodgett monolayers of porphyrin-fullerene dyads

A series of electron donor-acceptor (DA) dyads, composed of a porphyrin donor and a fullerene acceptor covalently linked with two molecular chains, were used to fabricate solid molecular films with the Langmuir-Blodgett (LB) technique. By means of the LB technique, the DA molecules can be oriented perpendicular to the plane of the substrate. In DHD6ee and its zinc derivative hydrophilic groups are attached to the phenyl moieties in the porphyrin end of the molecule; while in the other three dyads, TBD6a, TBD6hp, and TBD4hp, the hydrophilic groups are in the fullerene end of the molecule. This makes it possible to alternate the orientation of the molecules in two opposite directions with respect to the air-water interface and to fabricate molecular assemblies in which the direction of the primary photoinduced vectorial electron transfer can be controlled both by the deposition direction of the LB monolayer and by the selection of the used DA molecule. This was proved by the time-resolved Maxwell displacement charge measurements. The spectroscopic properties of the DA films were studied with the steady-state absorption and fluorescence methods. In addition, the time correlated single photon counting technique was used to determine the fluorescence properties of the dyad films.     

Acid-catalyzed hydrolyses of bridged bi- and tricyclic compounds-XII: Kinetics of hydration of 2-norbornenone,a special β,γ-unsaturated ketone

The reaction rates, activation parameters, solvent deuterium isotope effects, and dependences of rates on acid concentration measured for the hydration of 2-norbornenone and its four Me-substituted homologs in aqueous acid agree with the slow protonation of the CC double bond (A-S_E2 mechanism). Thus the mechanism differs from that reported for the isomerization (to α,β-unsaturated ketones) of unbridged β,γ-unsaturated ketones, e.g. 3-cycloalkenones and Δ⁵-3-ketosteroids, under catalysis by acid.     

On the values of continued fractions: q-series

Using the Poincaré-Perron theorem on the asymptotics of the solutions of linear recurrences it is proved that for a class of q-continued fractions the value of the continued fraction is given by a quotient of the solution and its q-shifted value of the corresponding q-functional equation.     

Lipschitz conditions in conformally invariant metrics

We consider two conformally invariant metrics in proper subdomains of euclideann-spaceR ⁿ. We show that Lipschitz mappings in these metrics include the class of quasiconformal mappings as a proper subclass, yet these Lipschitz mappings have many properties similar to those of quasiconformal mappings. Research supported in part by the U.S. National Science Foundation and the A.P. Sloan Foundation. Research supported in part by the Alexander von Humboldt Foundation.     

Influence of mesh deformation on the quality of large eddy simulations

The influence of mesh motion on the quality of large eddy simulation (LES) was studied in the present article. A three‐dimensional, turbulent pipe flow (Re_τ=360) was considered as a test case. Simulations with both stretching and static meshes were carried out in order to understand how mesh motion affects the turbulence statistics. The spatial filtering of static and moving mesh direct numerical simulation (DNS) data showed how an ideal LES would perform, while the comparison of DNS cases with static and moving meshes revealed that no significant numerical errors arise from the mesh motion when the simulation is fully resolved. The comparison of the filtered fields of the DNS with a moving mesh with the corresponding LES fields revealed different responses to mesh motion from different numerical approaches. A straightforward test was applied in order to verify that the moving mesh works consistently in LES: when the mesh is stretched in the streamwise direction, the moving mesh results should be in between the two extremal resolutions between which the mesh is stretched. Numerical investigations using four different LES approaches were carried out. In addition to the Smagorinsky model, three implicit LES approaches were used: linear interpolation (non‐dissipative), the Gamma limiter (dissipative), and the scale‐selective discretisation (slightly dissipative). The results indicate that while the Smagorinsky and the scale‐selective discretisation approaches produce results consistent with the resolution of the non‐static mesh, the implicit LES with linear interpolation or the Gamma scheme do not. Copyright © 2016 John Wiley & Sons, Ltd.     

Molecular valence calculations on cyclohexasulfur,cycloheptasulfur, and cyclooctasulfur

A theoretical study of homocyclic sulfur species S₆, S₇, and S₈ was carried out using a molecular valence method involving stepwise approximations for orthogonality and core-valence interactions. The valence shell orbitals are described at the minimal basis level. The geometries of the molecules are predicted well as compared with other theoretical studies and the experimental values. The slight overestimation of the SS bond length is typical to the nonpolarized basis sets. The energies of the valence orbitals are well in accord with the conventional all-electron ab initio results. The trend in the stabilities of the three molecules is discussed. The present method provides an attractive possibility to study homocyclic and heterocyclic systems involving heavier chalcogens with no increase of the computing time.     

Structure of anionic phospholipid coatings on silica by dissipative quartz crystal microbalance

The adsorption of anionic phospholipids on silica was investigated by the dissipative quartz crystal microbalance (QCM) technique. Liposomes composed of 1 mM 80:20 mol % of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphatidylcholine (POPC)/phosphatidic acid, POPC/phosphatidylglycerol, or POPC/phosphatidylserine in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) buffer at pH 7.4 (with or without 3 mM of CaCl2) were examined. We have previously demonstrated that similar phospholipid coatings can be used in capillary electrochromatography as a stationary phase for the separation of analytes. In this work, we focus on the formation of the coatings and on the type of lipid structure formed on silica. The QCM investigation comprised qualitative results based on changes in frequency and resistance, and quantitative modeling of the obtained results. The latter was performed using the dissipative QCM, which measures the quartz crystal impedance, combined with equivalent circuit analysis. A previously developed coating and cleaning procedure for phospholipid-coated fused silica capillaries was adopted in this study, and the same silica-coated crystal was used throughout the QCM study. We will demonstrate in this work that the type of lipid structure formed on silica, that is, a rather rigid supported lipid bilayer or a viscoelastic supported vesicle layer (SVL), is highly dependent on the lipid and solvent composition. We also show for the first time that the modeling of the dissipative QCM data can be used to extract a more quantitative picture of an adsorbed SVL, because, so far, published studies have merely used the QCM data in a qualitative sense.     

Intensely luminescent homoleptic alkynyl decanuclear gold(I) clusters and their cationic octanuclear phosphine derivatives

Treatment of Au(SC(4)H(8))Cl with a stoichiometric amount of hydroxyaliphatic alkyne in the presence of NEt(3) results in high-yield self-assembly of homoleptic clusters (AuC(2)R)(10) (R = 9-fluorenol (1), diphenylmethanol (2), 2,6-dimethyl-4-heptanol (3), 3-methyl-2-butanol (4), 4-methyl-2-pentanol (4), 1-cyclohexanol (6), 2-borneol (7)). The molecular compounds contain an unprecedented catenane metal core with two interlocked 5-membered rings. Reactions of the decanuclear clusters 1-7 with gold-diphosphine complex [Au(2)(1,4-PPh(2)-C(6)H(4)-PPh(2))(2)](2+) lead to octanuclear cationic derivatives [Au(8)(C(2)R)(6)(PPh(2)-C(6)H(4)-PPh(2))(2)](2+) (8-14), which consist of planar tetranuclear units {Au(4)(C(2)R)(4)} coupled with two fragments [AuPPh(2)-C(6)H(4)-PPh(2)(AuC(2)R)](+). The titled complexes were characterized by NMR and ESI-MS spectroscopy, and the structures of 1, 13, and 14 were determined by single-crystal X-ray diffraction analysis. The luminescence behavior of both Au(I)(10) and Au(I)(8) families has been studied, revealing efficient room-temperature phosphorescence in solution and in the solid state, with the maximum quantum yield approaching 100% (2 in solution). DFT computational studies showed that in both Au(I)(10) and Au(I)(8) clusters metal-centered Au → Au charge transfer transitions mixed with some π-alkynyl MLCT character play a dominant role in the observed phosphorescence.     

Thermooxidative degradation of LDPE nanocomposites: Effect of surface treatments of fumed silica and boehmite alumina

Fumed silica (FS) and synthetic boehmite alumina (BA) nanofillers with and without surface treatments were incorporated in 5 wt. % in low density polyethylene (LDPE) through melt blending. FS was treated using hexadecyl silane, whereas BA using octyl silane and alkylbenzene sulfonic acid. The related nanocomposites were subjected to pyrolysis gas chromatography-mass spectrometry (Py-GC-MS) and thermogravimetric analysis (TGA) under isothermal and dynamic conditions, respectively. Py-GC-MS results proved that the thermal degradation mechanism did not change in the presence of the nanofillers. The latter suppressed the formation of high molecular weight hydrocarbons and affected the relative amounts of diene/alkene/alkane fragments for each hydrocarbon fraction.