Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

On the exactness of a theorem of G.A. Fomin

, . . [1] - . .     

A Theoretical Study of Complex Formation between Formaldehyde and Lithium

Ab initio SCF and CI calculations on the cationic and neutral complexes of formaldehyde and lithium are reported. For the cationic complex CH₂O/Li⁺, the stabilization energy of 41.7 kcal/mol obtained from the SCF calculation increases to 51.6 kcal/mol if a configuration interaction is introduced. For the neutral complex CH₂O^?/Li⁺, the C_2v-conformer of the ²A₁-state with the equilibrium bond distances of d(C? O) = 1.23 Å and d (O? Li) = 1.90 Å is calculated to be more stable than the ₂B₁-state with d (C? O) = 1.34 Å, and d (O? Li) = 1.65 Å. Charge transfer and polarization effects upon complex formation are discussed.     

Determination of Cr(III) and Cr(VI) in environmental waters by derivative flame atomic absorption spectrometry using flow injection on-line preconcentration with double-microcolumn adsorption

The species of Cr(III) and Cr(VI) in water samples were determined by flow injection on-line preconcentration and separation on two-microcolumn system-derivative flame atomic absorption spectrometry during a collaborative analysis for certification. The Cr(III) and Cr(VI) in water samples were retained on two microcolumns with ion exchange resin and were eluted directly to nebulizer by 15% HNO³ and 8% NH⁴NO³, respectively. The characteristic concentration (at the sensitivity grade of 2 mV min^?1 for 1 min of preconcentration time) for Cr(III) and Cr(VI) were 0.130 and 0.0985 μg l^?1, in the order which were 332- and 431-fold better than those of FAAS, and 45- and 47-fold better than those of FI-FAAS, respectively. The relative standard deviations were 3.27% and 3.66% with corresponding detection limits (3σ) of 0.244 and 0.235 μg l^?1, respectively. The linear ranges of determinations for Cr(III) and Cr(VI) were 0～100 μgm l^?1 with correlation coefficients of 0.9984 to 0.9996. The satisfactory recovery of 94.4%～106% for Cr(III) and Cr(VI) could be obtained from water samples.     

One-pot synthesis of cyclic enecarbamates from lactam carbamates

A general, practical and efficient one-pot synthesis of cyclic enecarbamates is described. The protocol proceeds via reduction of lactam carbamate with Super-Hydride^®, followed by in situ dehydration with trifluoroacetic anhydride (TFAA) and diisopropylethylamine (DIPEA).