FTIR Emission Spectra, Molecular Constants, and Potential Curve of Ground State GeO

Extensive new high-temperature, high-resolution FTIR emission spectroscopy measurements for the five common isotopomers of GeO are combined with previous diode laser and microwave measurements in combined isotopomer analyses. New Dunham expansion parameters and an accurate analytical potential energy function are determined for the ground X1Sigma+ state. Copyright 1999 Academic Press.     

Application of solid-phase micro-extraction and comprehensive two-dimensional gas chromatography (GC×GC) for flavour analysis

Summary Headspace solid-phase micro-extraction (HS SPME), comprehensive two-dimensional GC (GC×GC), and flame ionization detection (FID) have been examined for their suitability and compatibility for rapid sampling, separation, and detection of garlic flavour volatiles. This approach (HS-SPME-GC×GC-FID) is distinctly superior to use of one-dimensional GC, i. e., HS-SPME-GC-FID. Direct comparison of the experimental results showed that a 10–50-fold increase in sensitivity is obtained, separating power is substantially enhanced, and the peak capacity is up to ten times higher. As a consequence, much more detailed flavour analysis can be performed; this results in better information about the aroma-active compounds.     

Determination of chlorophenoxy acid herbicides in water by in situ esterification followed by in-vial liquid-liquid extraction combined with large-volume on-column injection and gas chromatography-mass spectrometry

A new approach for rapidly analysing chlorophenoxy acid herbicides in water is presented. The chlorinated acids are derivatised with dimethyl sulphate in the water sample itself (800 microl) and, next, the methyl esters are extracted with 800 microl of n-hexane. A 200-microl volume of the extract is injected into the GC-MS system. The miniaturisation of both the methylation and extraction steps could be implemented because of the use of large-volume on-column injection and mass spectrometric detection. The optimisation of the methylation reaction for the simultaneous determination of (3,6-dichloro-2-methoxy)benzoic acid, (2-methyl-4-chlorophenoxy)- and (2,4-dichlorophenoxy)acetic acids, (+/-)-2-(4-chloro-2-methylphenoxy)- and 2-(2,4-dichlorophenoxy)propanoic acids and 4-(4-chloro-2-methylphenoxy)- and 4-(2,4-dichlorophenoxy)butyric acids showed that tetrabutylammonium salts act as catalysts. Addition of sodium hydroxide was required to obtain quantitative reaction yields for 4-(4-chloro-2-methylphenoxy)- and 4-(2,4-dichlorophenoxy)butyric acids. The methylation-cum-extraction procedure takes only 3 min per sample for a batch of seven samples. Linear calibration plots were obtained for the complete procedure and the limits of detection were of 10-60 ng/l with a signal-to-noise ratio (S/N) of 6. Relative standard deviations ranged from 8 to 15% (n=7) for analyte concentrations of 0.5 microg/l in surface water.     

Miniaturised pressurised liquid extraction of chloroanilines from soil with subsequent analysis by large-volume injection-gas chromatography-mass spectrometry

A number of chloroanilines were extracted from soil by means of miniaturised pressurised liquid extraction (PLE). The extraction procedure was optimised for both large-volume on-column (LV-OC) and programmed-temperature vaporisation (PTV) injections combined with GC-MS. Hexane was the only extraction solvent suited for LV-OC and hexane/acetone gave the best results when using a PTV. Overall, the hexane/acetone-plus-PTV procedure shows better results than the hexane-plus-LV-OC method in terms of analyte recovery (36-109% versus 5-87%), repeatability (8-13% versus 4-31%) and detection limits. Both approaches allow detection of the chloroanilines in complex soil samples down to the 5-50 ng/g range. However, the PTV-based procedure is superior as regards robustness: over one hundred samples can be analysed without any maintenance being required.     

Fast miniaturised sample preparation for the screening and comprehensive two-dimensional gas chromatographic determination of polychlorinated biphenyls in sludge

Polychlorinated biphenyls (PCBs) in sludge are usually extracted by a technique such as Soxhlet with subsequent fractionation prior to long GC runs using GC-ECD or GC-HRMS. In this study, the extraction of selected chlorinated biphenyls (CBs) from a spiked sludge sample by three rapid techniques, i.e. ultrasonic (USE), pressurised-liquid (PLE), and microwave-assisted (MAE) extraction using a domestic microwave, was studied, with subsequent direct GC-ECD, GC-MS, or GC x GC-microECD analysis of the extracts. The main goal was to select an appropriate, and miniaturised, extraction method after only a brief optimisation and demonstrate the power of GC x GC analysis of dirty extracts. For PLE similar CB recoveries were found when extracting with either n-hexane or n-hexane/acetone (1/1). For USE and MAE, n-hexane/acetone (1/1) was the preferred extraction solvent. USE gave the best recoveries (80-95%; except 130% for CB 105). The only clean-up needed prior to GC-MS or GC x GC-gECD analysis was the removal of sulphur-containing compounds. GC-ECD was not suitable for these dirty extracts. The lowest LODs for the CBs (20 fg or 0.1 ng/g sludge) were found when combining USE and GC x GC-microECD, because of the powerful extraction, high separation power and excellent detectability provided by this technique.     

At-line gas chromatographic-mass spectrometric analysis of fatty acid profiles of green microalgae using a direct thermal desorption interface

Ketoconazole is an antifungal agent, which is the active ingredient in a shampoo primarily used for the treatment of seborrhatic dermatitis (anti-dandruff shampoo). The shampoo also contains imidazolidinylurea as a formaldehyde releasing preservative. The aim of this study was to develop a HPLC system that allows the determination of both ketoconazole and formaldehyde. The finally selected isocratic system consisted of an Interchrom Nucleosil (250 X 4.6 mm, 5 microm) C8 column and a mobile phase containing acetonitrile-phosphate buffer 0.025 M, pH 4.0, 45/55 (v/v). Ketoconazole could immediately be determined at 250 nm after injection of diluted shampoo. Formaldehyde was measured at 345 nm after derivatisation with a 2,4-dinitrophenylhydrazine solution. At the selected conditions, the other excipients of the shampoo did not interfere in the assays for both substances. Method validation was performed on both assays. Different selectivity towards ketoconazole and formaldehyde was observed when applying other C8 columns. This fact, however, did not affect the assays of both substances.     

Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography-time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography (GC x GC) with time-of-flight mass spectrometry detection is used to profile the fatty acid composition of whole/intact aquatic microorganisms such as the common fresh water green algae Scenedesmus acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI without any sample preparation steps. It is shown that the technique can be useful in the identification of lipid markers in food-web as well as environmental studies. For instance, new mono- and diunsaturated fatty acids were found in the C(16) and C(18) regions of the green algae S. acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI samples. These fatty acids have not, to our knowledge, been detected in the conventional one-dimensional (1D) GC analysis of these species due to either co-elution and/or their presence in low amounts in the sample matrix. In GC x GC, all congeners of the fatty acids in these microorganisms could be detected and identified due to the increased analyte detectability and ordered structures in the two-dimensional separation space. The combination of direct thermal desorption (DTD)-GC x GC-time-of-flight mass spectrometry (ToF-MS) promises to be an excellent tool for a more accurate profiling of biological samples and can therefore be very useful in lipid biomarker research as well as food-web and ecological studies.     

Determination of the carbon isotopic composition of whole/intact biological specimens using at-line direct thermal desorption to effect thermally assisted hydrolysis/methylation

In this paper, we discuss the use of a direct thermal desorption (DTD) interface as an alternative to Curie-point flash pyrolysis system as an inlet technique in gas chromatography-combustion isotope-ratio mass spectrometry (GC/C-IRMS) analysis of whole/intact phytoplankton and zooplankton specimens. The DTD in combination with a combipal auto-injector is programmed to perform the injection, evaporation of solvents, transport of capped programmed-temperature vaporizer (PTV) liners to the PTV injector and chemical derivatisation (thermally assisted hydrolysis/methylation; THM) such that a profile of a cellular fatty acids is obtained. Flow-cytometric sorted microalgae and handpicked zooplankton are used as samples with trimethylsulfonium hydroxide (TMSH) as methylating reagent. A major advantage of this novel approach over the Curie-point technique is the automation of the total procedure, which allows unattended analysis of large sample series. The profiles and delta(13)C carbon isotopic signatures of the fatty acid methyl esters (FAMEs) produced are very similar to those obtained using the Curie-point flash pyrolysis method. It is shown that algal samples must be kept no longer than 48 h in the DTD sample tray prior to the THM-analysis in order to maintain the integrity of their FAME profile.     

Miniaturized automated matrix solid-phase dispersion extraction of pesticides in fruit followed by gas chromatographic-mass spectrometric analysis

In this study a simple and fast miniaturized automated matrix solid-phase dispersion method for the sample preparation and quantitative extraction of pesticides was developed and evaluated. Only 25 mg of sample and 100 microl of organic solvent were used per analysis for this new miniaturized set-up. The extracts were subsequently analysed by GC-MS without any further purification. The method was optimized for oranges and tested for the determination of a variety of organophosphorus pesticides and a pyrethroid at concentration levels below the maximum residue levels set by the European Union and authorities in The Netherlands. The limits of detection were 4-90 microg/kg. The recoveries for pesticides in orange were 83-118% and the relative standard deviations for the total procedure were 10-13% (n=4) at the limit of quantification. The feasibility of the developed method for apple, pear and grapes was also studied. Equally good results were obtained, but for apple the washing step should be omitted.