TLC determination of mebendazol and pentoxifylline as residues on pharmaceutical equipment surfaces

This paper presents the applicability of thin-layer chromatographic methods with a subsequent densitometric or video densitometric quantitation for determination of residues in controlling pharmaceutical equipment cleanliness. Analytical methods were developed for monitoring residues of pentoxifylline at 10 mg/M2 and mebendazol at 1 mg/M2 on stainless steel surfaces. Simulated samples were prepared by addition of a calculated amount of pharmaceutical (as a solution) on a 35 x 35 cm stainless steel surface. After evaporation of solvent, the residues were wiped with wetted cotton. The cotton was extracted with dichloromethan-methanol (1 + 1). Filtered extract was concentrated by vacuum evaporation and an aliquot applied to the plate, where standards were also applied. In the narrow concentration range near the acceptable residue limits, linear calibration curve could be obtained for both substances. The mean recovery (n = 4) obtained by densitometric quantitation was 93.4% for pentoxifylline and 85.6% for mebendazol, with coefficients of variation of 3.5 and 8.3%, respectively. Results of video densitometric quantitation did not differ significantly. However, data acquisition and evaluation is faster compared with densitometry and allows better archiving possibilities as required by the regulatory authorities. Both quantitation modes can be applied to routine control of pharmaceutical equipment cleanliness.     

Heterocyclization of functionalized heterocumulenes with C,N- and C,O-binucleophiles: IV. Reactions of 1-chloroalkylheterocumulenes and <Emphasis Type="Italic">N</Emphasis>-(1-chloroalkylidene)carbamates with 2-benzimidazolylacetonitriles and methyl 2-benzimidazolylacetates

1-Chloroalkyl isocyanates and 1-chloroalkylcarbodiimides undergo regioselective cyclization with nitriles and esters of 2-benzimidazolylacetic acid to give derivatives of 1-oxo and 1-arylimino-1,2,3,5-tetrahydrobenzo[4,5]imidazo[1,2-c]pyrimidine respectively. The cyclocondensation of 1,1-dichloroalkyl isocyanates or N-(1-chloroalkylidene)carbamates with nitriles and esters of 2-benzimidazolylacetic acid afforded 1,5-dihydrobenzo[4,5]imidazo[1,2-c]pyrimidin-1-one derivatives.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 11, 2004, pp. 1715–1724.Original Russian Text Copyright © 2004 by Vovk, Lebed, Pirozhenko, Tsymbal.For communication III see [1].     

4-Functionally Substituted 3-Heterylpyrazoles: XIII. 3-Aryl(heteryl)-4-(4-pyrazolyl)-1,2,3,4-tetrahydropyrimidin-2-ones(thiones)

Cyclocondesation of 3-aryl(heteryl)pyrazole-4-carbaldehydes with ethyl acetoacetate and urea (thiourea) in the presence of FeCl₃ · 6H₂O afforded 3-aryl(heteryl)-4-(4-pyrazolyl)-1,2,3,4-tetrahydropyrimidin-2-ones(thiones).__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 1, 2005, pp. 97–98.Original Russian Text Copyright © 2005 by Bratenko, Chornous, Vovk.     

人教版高中化学必修教科书的内容呈现方式及特点分析*

高中化学教科书是发展学生化学学科核心素养的重要载体和资源平台。依据《普通高中化学课程标准(2017年版)》编写的人教版普通高中化学必修教科书作为分析文本,着重从栏目系统、图像系统、习题系统角度对其呈现方式进行分析,具体特点表现为:栏目系统强化功能性,图像系统凸显直观性,习题系统体现针对性、情境性、开放性,以期为高中化学教师有效使用教科书、落实化学学科核心素养的培养发挥积极作用。     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

N-Doped Carbon Nanofibers Encapsulating CoO@Co9S8 Nanoparticles: Preparation from S-Rich Co32 Coordination Cluster Precursors by Electrospinning and Application for Superior Li-ion Storage

Thiacalixarene-supported Co₃₂nanoclusters encapsulated in polyacrylonitrile nanofibers(Co₃₂@PAN-NFs) by electrospinning have been utilized as precursors to fabricate N-doped CoO@Co₉S₈ carbon nanofibers(CoO@Co₉S₈@CNFs) for superior Li-ion storage. The S-rich Co₃₂ clusters capped by organic sheets afforded the well dispersed cobalt oxide/sulfide nanoparticles embedded in carbon nanofiber composites by direct calcination. The N-doped CoO@Co₉S₈@CNFs nanocomposites have been utilized as anode materials for lithium ion battery with the reversible capabilities being of 1051.8, 967.6, 894.7, 782.7, 669.5 and 525.4 mA·h/g at 0.1, 0.2, 0.5, 1, 2 and 3 A/g, respectively. The CoO@Co₉S₈@CNFs also showed a relatively high stable capacity of 551.7 mA·h/g at the current density of 1 A/g after 200 cycles of rate experiments. The as-obtained N-doped CoO@Co₉S₈@CNFs nanocomposites exhibited superior reversible capacity, rate performance, Coulomb efficiency(74.5% vs. 63.9%) and cyclic stability comparing with the CoO@Co₉S₈@C derived from simple annealing of Co₃₂ templates.     

利用高吸水树脂优化3个中学化学实验*

尝试利用高吸水树脂对“酸碱中和反应、碳酸钠和碳酸氢钠分别与稀盐酸反应、探究分子运动现象”这3个实验进行创新改进,充分利用了高吸水树脂特殊的结构作用,使3个实验的现象更加显著。改进实验操作简便,高效简洁,值得推广到一线化学课堂的演示实验或学生分组实验。     

Rhodium(III), palladium(II), and platinum(II) complexes with 2-(2-hydroxybenzoyl)-N-methylhydrazinecarbothioamide: Syntheses,structures, and spectral characteristics

The syntheses and spectral (IR, UV-VIS, XPS, and ¹H and ¹³C NMR) characteristics of the rhodium(III), palladium(II), and platinum(II) complexes with 2-(2-hydroxybenzoyl)-N-methylhydrazinecarbothioamide (HBMHCTA) are described. The coordination of HBMHCTA to the central metal ion and its intraligand rearrangement in the complex formation of rhodium(III) ions are studied. The structure of the mixed-ligand complex [Pd(H₂L)PPh₃] is determined by X-ray diffraction analysis.