On low temperature fluorescence of perylene crystals

At low temperatures, the broad excimer fluorescence band of α-perylene crystals is replaced by a weakly structured emission at higher energy. This emission originates from a new crystal state (Y-state) which is populated independently of the high temperature excimer (E-state). Due to the temperature dependence of its first order decay rate and due to the thermally activated formation of the E-state, the Y-emission grows rapidly at temperatures below 90 K. The Y-emission differs from the fluorescence of the monomeric β-perylene at 5.5 K by its Stokes shift of 1300 cm^?1, the lack of vibronic structure, the long first order decay time of 40 ns and the absence of bimolecular annihilation indicating a localized state. The Y-state is attributed to a less relaxed pair state formed upon contraction of the dimeric crystal lattice.     

Biosynthesis of cis-Jasmone: a pathway for the inactivation and the disposal of the plant stress hormone jasmonic acid to the gas phase?

Flowers of Jasminum rincospernum convert deuterium-labeled jasmonic acid [²H₅]- 4a and methyl 1,2-didehy-drojasmonate [²H₄]- 8 into labeled cis-jasmone [²H₄]- 1. The labeling pattern of the resulting cis-jasmone ( 1 ) is consistent with a Grob fragmentation of the didehydrojasmonic acid 8a by decarboxylation after protonation of the keto group. The pathway is also operative in leaves of several higher plants, including mono- and dicotyledonous specimens. In Lima beans besides cis-jasmone ( 1 ) an equimolar mixture of trans- and cis-isomers of methyl jasmonate ( 4 ) and epi- 4 , is emitted after treatment with Jasmonic acid ( 4a ). The relative ratio of 1 and 4 /epi- 4 is critically dependent on the concentration of the administered jasmonic acid ( 4a ) and the ambient temperature of the plant. Unlike 4a , the 1,2-didehydrojasmonic acid ( 8a ) is not able to induce volatile biosynthesis. Therefore, the transformation of 4a via 8 a into 1 appears to have a special importance for the irreversible inactivation and disposal of the plant stress hormone jasmonic acid to the gas phase and may serve, besides other modes of inactivation, as a shunt in case of high internal of the stress hormone 4a. The conversion of the biologically active jasmonic acid ( 4a ) into the inactive and volatile cis-jasmone (1) is the first example of a disposal of an inactive metabolite of a phytohormone to the gas phase as an infinite sink.     

The reaction of 2-picoline N-Oxide with o-substituled benzoates and lsatoic anhydrides

The reaction of 2-picoline N-Oxide anion with o-substituted henzoates and isatoic anhydrides to give synthetically useful l-(2-methoxyphenyl)-2-(2-pyridinyl)ethanone N-oxides, I-(2-hydroxy-phenyJ)-2-(2-pyridinyl)ethanone N-oxides and I -(2-arninopheny])-2-(2-pyridinyl)ethanone N-oxides is described.     

Detection of adsorption of Ru(II) and Os(II) polypyridyl complexes on gold and silver nanoparticles by single-photon counting emission measurements

The present study describes a new application of ruthenium(II) tris(bipyridine) (Ru(bpy)3(2+)) and osmium(II) tris(bipyridine) (Os(bpy)3(2+)) as phosphorescent labels for the quantification of surface binding of molecules to gold and silver nanoparticles. The fraction of Ru(bpy)3(2+) and Os(bpy)3(2+) that is in solution can be distinguished from the surface-bound fraction by the relative lifetimes and integrated emission yields as determined by time-correlated single-photon counting (TCSPC) spectroscopy. Complementary steady-state measurements were carried out to confirm surface attachment of the phosphorescent label molecules. Although the emission of solutions of Ru(bpy)3(2+) and Os(bpy)3(2+) is quenched proportional to the concentration of 10 nm Au or 20 nm Ag nanoparticles, the quenching is static and not diffusional quenching observed in Stern-Volmer plots. The results demonstrate that time-resolved spectroscopy provides a rapid method for the measurement of surface binding of labeled molecules on metallic nanoparticles. While steady-state measurements require the preparation of a series of samples with varying quencher concentrations and a reference, the method described herein requires a single sample plus reference. The mechanism for phosphorescence quenching on Au and Ag nanoparticles is discussed in terms of energy and electron transfer theories.     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.     

Synthese und Abbau von 1-(5-Nitro-2-thiazolyl)-2-imidazolidinon und Derivaten

1-(5-Nitro-2-thiazolyl)-2-imidazolidinone is synthesized from 2-amino-5-nitro-thiazole and 2-chloroethyl-isocyanate. The structure of this new potent schistosomicide is established by acid and alkaline degradation as well as by synthesis starting from 2-imidazolidinone. A number of derivatives of 1-(5-nitro-2-thiazolyl)-2-imidazolidinone are reported.     

Komplexometrische Bestimmung von Metallkationenverunreinigungen in Reinchemikalien

Zusammenfassung Ein Verfahren zur quantitativen summarischen Bestimmung von Metallionenverunreinigungen in flüssigen Chemikalien (Reinheitsprüfung) durch komplexometrische Titration mit photometrischer Endpunktsanzeige wird beschrieben. Als Indikator dient Eriochromschwarz T; erfaßbar ist zirka 1 g in 20 ml. Durch einfaches Einengen des Ausgangsmaterials lassen sich noch Metallionengehalte von 0,01 ppm mit einer Genauigkeit von einigen Prozent bestimmen.

---

Summary A procedure is described for the quantitative summary determination of metal ion impurities in liquid chemicals (purity tests) through complexo-metric titration with photometric endpoint indication. Eriochrome black T serves as indicator. Approximately 1 g can be detected in 20 ml. Metal ion contents as low as 0.01 ppm can still be determined with a precision of several per cent by simple concentration of the starting material.

---

Résumé On décrit un procédé de dosage total quantitatif des impuretés à l'état d'ions métalliques dans les produits chimiques liquides (contrôle de la pureté) par titrage complexométrique avec détection du point équivalent par photométrie. On utilise le noir ériochrome T comme indicateur. La limite de dilution est d'environ 1 g/20 ml. On peut encore doser des teneurs en ions métalliques de 0,01 ppm avec une erreur de quelques pour cent simplement en diminuant la quantité initiale de substance.

     

Die chemie der schweren carben-analogen R2M,M = Si,Ge, Sn: IX. Eigenschaften und thermolyse von neuen 7-silabicyclo[2.2.1]heptadienen

Factors governing the ease and mechanism of 7-silabicyclo[2.2.1]heptadienes thermolysis in order to generate free silylenes and the corresponding benzene derivatives are investigated. For this purpose, 29 new compounds of the types VII–X have been prepared. No indications for a polar mechanism or an intermediate biradical could be found. The degradation is exactly of first order in all cases investigated sofar, and is enhanced by phenyl groups at the bridgehead C atoms, if a conformation coplanar with the basic ring is allowed by the neighbouring substituents, but is not enhanced by phenyl groups at the Si. The X-ray structure of two typical derivatives is discussed with this respect. A special mechanism is operating in the easy thermolysis of carbomethoxy-substituted compounds leading to cyclic sila enolether intermediates.     

Critical parameters and optimization of a magnesium-selective liquid membrane electrode for application to human blood serum

Summary The selectivity of a new magnesium ionophore (ETH 7025) induced in membranes of different compositions is experimentally studied in view of the ion activities in human serum. The required selectivity coefficient against calcium for the application of an ion-selective magnesium electrode to human serum is calculated for the worst case. Other critical parameters for the application of a liquid PVC-based ion-selective membrane to undiluted human serum discussed are: the sensor lifetime which is related to the lipophilicity of the carrier as well as the ruggedness of the membrane against interactions with components of the relatively lipophilic sample.