The detection of oxygen in magneto-optical layers with SIMS

The detection of oxygen in magneto-optical layers is of fundamental importance for the characterization of the stability of RE-TM material. The magnetic properties are directly influenced by oxide formation. Oxygen depth profiles are carried out by using the SIMS technique. A comparison with magnetic measurements showed a clear conformity. We were able to study the oxidation behaviour of various layers at room temperature and at higher values up to 250° C for several hours. It could be shown that aluminum is a successful material for the protection of RE-films against oxidation. The difficulties of translating SIMS counting rates into concentration values were overcome by using EPMA. Specially prepared reference samples were measured by this technique and could then be used as standard samples for SIMS.     

Branched and dendritic metallo-carbosiloxanes with OCH2PPh2MLn end-grafted units

A straightforward method for the preparation of metallo carbosiloxanes of type Si(OCH₂CH₂CH₂SiMe₂[OCH₂PPh₂M(CO)_n])₄ (n = 3, M = Ni, 7a; n = 4, M = Fe, 7b; n = 5: M = Mo, 7c; M = W, 7d), Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₄ (8) and Me₂Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₂ (11) is described. The reaction of Si(OCH₂CH₂CH₂SiMeXCl)₄ (1: X = Me, 2: X = Cl) or Me₂Si(OCH₂CH₂CH₂SiMeCl₂)₂ (9) with HOCH₂PPh₂ (3) produces Si(OCH₂CH₂CH₂SiMe₂(OCH₂PPh₂))₄ (4), Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₄ (5) or Me₂Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₂ (10) in presence of DABCO. Treatment of the latter molecules with Ni(CO)₄ (6a), Fe₂(CO)₉ (6b), M(CO)₅(Thf) (6c: M = Mo; 6d: M = W), respectively, gives the title compounds 7a-7d, 8 and 11 in which the PPh₂ groups are datively bound to a 16-valence-electron metal carbonyl fragment.The formation of analytical pure and uniform branched and dendritic metallo carbosiloxanes is based on elemental analysis, and IR, ¹H, ¹³C{¹H}, ²⁹Si{¹H} and ³¹P{¹H} NMR spectroscopic studies. In addition, ESI-TOF mass spectrometric studies were carried out.     

Darstellung und Eigenschaften von π-Cyclopentadienylrhodium-bis(tert.-phosphit)-Komplexen

The half-sandwich type compounds C₅H₅Rh[P(OR)₃]₂ (R = CH₃, C₂H₅, C₆H₅, p-CH₃C₆H₄, p-ClC₆H₄) have been prepared from [(P(OR)₃)₂RhCl]₂ and NaC₅H₅. The NMR. data as well as the IR. and mass spectra of the new compounds will be discussed. The preparation of C₅H₅Rh(CO)P(OC₂H₅)₃ is also reported.     

Platinum(II) 1,10-phenanthroline complexes of acetylides containing redox-active groups

The new diimine ligand 3,8-di-n-pentyl-4,7-di(phenylethynyl)-1,10-phenanthroline (1) was used for the synthesis of a range of Pt(II) complexes, viz.[Pt(1)Cl2], [Pt(1)(C triple bond C-Ph)2], [Pt(1)(C triple bond C-Fc)2] and [Pt(1)(C triple bond C-p-C6H4-C triple bond C-Fc)2](Fc = ferrocenyl). Crystal structure analyses were performed for [Pt(1)Cl2] and [Pt(1)(C triple bond C-Ph)2] and revealed that the di(acetylide)pi-tweezer of the latter binds a molecule of chloroform through C-H...pi hydrogen bonds. The redox and optical properties of 1 and its complexes were investigated by (spectro-)electrochemistry, UV-Vis and luminescence spectroscopy, and an energy level diagram was derived for [Pt(1)(C triple bond C-Fc)2] and related compounds on the basis of the data collected. The ferrocenyl-substituted Pt(II) complexes are donor-sensitiser assemblies. Intramolecular quenching of the photoexcited Pt(II) diimine unit leads to very short luminescence lifetimes for [Pt(1)(C triple bond C-p-C(6)H(4)-C triple bond C-Fc)2](2 ns) and [Pt(1)(C triple bond C-Fc)2](0.3 ns), as opposed to [Pt(1)(C triple bond C-Ph)2](0.7 micros). Excimer formation has been observed for [Pt(1)(C triple bond C-Ph)(2)] at room temperature in dichloromethane and at low temperatures in frozen glassy dichloromethane and 2-methyltetrahydrofuran solution, but not in the solid state.     

A stable binuclear complex containing PdHPd bonds

The preparations of the binuclear hydrido-bridged cations [(terdentate ligand)Pd(μ-H)Pd(terdentate ligand)]⁺ from [(terdentate ligand)Pd(acetone)]⁺ and NaO₂CH and [(terdentate ligand)Pd(μ-H)Pt(terdentate ligand)]⁺ from [(terdentate ligand)Pd(acetone)]⁺ and [(terdentate ligand)PtH] (terdentate ligand = 2,6-(Ph₂PCH₂)₂C₆H₃) are reported. The preparation of the cation [(terdentate ligand)Pt(μ-H)Pt(terdentate ligand)]⁺ is also reported.     

Observation of two diffusive relaxation modes in microemulsions by dynamic light scattering

Water-in-oil microemulsions stabilized by AOT and dispersed in n-alkane oils with a constant molar water-to-surfactant ratio were studied by dynamic light scattering. A dilution series (in the range of volume fraction of water plus surfactant, phi approximately 0.02-0.52) was used, which allowed us to extract information about droplet sizes, diffusion coefficients, interactions, and polydispersity from experimental data. We report the observation of two diffusive relaxation modes in a concentrated microemulsion (0.20 < phi < 0.5) due to density (collective diffusion) and concentration or polydispersity (self-diffusion) fluctuations. Below this concentration it was difficult to resolve two exponentials unambiguously, and in this case one apparent relaxation mode was observed. It was found that for a given composition self-diffusion is more pronounced in apparent relaxation mode for a shorter chain length alkane. The concentration dependence of these diffusion coefficients reflects the effect of hard sphere and the supplementary attractive interactions. It was observed that the attractive part becomes more pronounced in the case of a large alkane chain oil at a given temperature. This explains the shift of the region of microemulsion stability to lower temperatures for higher chain length alkanes. Increase in hydrodynamic radius, Rh, obtained from the diffusion coefficient extrapolated to infinite dilution was observed with increase of alkane chain length. The polydispersity in microemulsion systems is dynamic in origin. Results indicate that the time scale for local polydispersity fluctuations is at least 3 orders of magnitude longer than the estimated time between droplet collisions.     

Determination of chlormequat and mepiquat in pear,tomato, and wheat flour using on-line solid-phase extraction (Prospekt) coupled with liquid chromatography-electrospray ionization tandem mass spectrometry

A new methodology based on pressurized liquid extraction (PLE) followed by LC-MS is presented for the simultaneous and unequivocal determination of alkylphenol ethoxylates (APEOs) and their degradation products, alkylphenols (APs) and alkylphenoxy carboxylates (APECs), in sediment samples. The protocol, applicable to a full range of APEO oligomers and degradation products, permits the sensitive and selective determination of APEOs (nEO = 1-15), APECs (nEO = 0-1) and APs at low ppb levels (LODs = 1-5 microg/kg) in sediment samples. Optimization of the operational parameters of PLE clearly demonstrates that significant thermal losses of APs occur during extraction at elevated temperatures. The loss of octylphenol (OP) at 100 degrees C was 61.2% and of nonylphenol (NP) 40.0%, whereas other compounds were completely recovered. Thus, to avoid losses due to the volatility of alkylphenols, a low extraction temperature should be applied. The conditions that gave the best results for all target compounds were as follows: extraction solvent mixture, methanol-acetone (1:1, v/v); temperature, 50 degrees C; pressure, 1500 p.s.i.; two static cycles. Using PLE and a subsequent clean-up with solid-phase extraction (SPE), the simultaneous extraction of APEOs, APs and APECs from sediment samples was achieved yielding recoveries >70% and producing low MS background noise. The developed methodology was applied on a routine basis to the analysis of alkylphenolic compounds in sediment samples. APEOs and their persistent degradation products were detected in significant concentrations in sediments from Portuguese rivers, especially at sites situated in the proximity of industrial plants (mainly the textile industry). The total concentration of alkylphenolic compounds (APEOs+APs+APECs) ranged from 155 to 2400 microg/kg. Of all the alkylphenolic compounds, NP comprised 40 to 50% with concentrations up to 1172 microg/kg.