A Novel Method for the Synthesis of Newfangled Asymmetric Schiff Bases from α‐amino Acids under Ultrasonic Conditions and in Aqueous Medium

Chiral Schiff bases were obtained at high yields via a novel technique. Aryl aldehydes and chiral α‐amino acids were treated (1) in the presence of H₃PO₄ in ethanol at 80°C for 24 h, and (2) in the presence of K₂CO₃ under ultrasonic conditions in an aqueous ethanol medium within 5 min with yields reaching up to 96%. The results showed that the presented methodology under ultrasonic conditions was effective, practical, and eco‐friendly compared to that using an acidic medium. The corresponding asymmetric Schiff bases were synthesized for the first time, and were characterized by ¹H and ¹³C nuclear magnetic resonance and infrared spectroscopy and high‐resolution mass spectrometry.     

Simulation and hybrid fuzzy-PID control for positioning of a hydraulic system

Accuracy and precision of position control of hydraulic systems are key parameters for engineering applications in order to set more economical and quality systems. In this context, this paper presents modeling and position control of a hydraulic actuation system consisting of an asymmetric hydraulic cylinder driven by a four way, three position proportional valve. In this system model, the bulk modulus is considered as a variable. In addition, the Hybrid Fuzzy-PID Controller with Coupled Rules (HFPIDCR) is proposed for position control of the hydraulic system and its performance is tested by simulation studies. The novel aspect of this controller is to combine fuzzy logic and PID controllers in terms of a switching condition. Simulation results of the HFPIDCR based controller are compared with the results of classical PID, Fuzzy Logic Controller (FLC), and Hybrid Fuzzy-PID controller (HFPID). As a result, it is demonstrated that Hybrid Fuzzy PID Controller with Coupled Rules is more effective than other controllers.     

Ink‐Jet Printing of Luminescent Ruthenium‐ and Iridium‐Containing Polymers for Applications in Light‐Emitting Devices

Summary: Defined films of luminescent ruthenium(II ) polypyridyl‐poly(methyl methacrylate) (PMMA) and iridium(III ) polypyridyl‐polystyrene (PS) copolymers could be prepared by ink‐jet printing. The copolymers were deposited on photoresist‐patterned glass substrates. Films as thin as 120 nm could be printed with a roughness of 1 to 2%. In addition, the film thickness could be varied in a controlled way through the number of droplets deposited per unit area. The topography of the ink‐jet printed films was analyzed utilizing an optical profilometer. The absorbance and emission spectra were measured using fast parallel UV‐vis and fluorescence plate reader.

Photo of the solutions of luminescent ruthenium (left) and iridium (right) containing polymers in a glass microtiter plate (top). The subsequently prepared films using ink‐jet dispensing techniques are shown below.     

The separation–preconcentration and determination of ultra-trace gold in water and solid samples by dispersive liquid–liquid microextraction using 4-ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) as chelating agent and flame atomic absorption spectrometry

A selective separation and preconcentration method for the determination of gold ions in water and ore samples has been developed using dispersive liquid–liquid microextraction, followed by flame atomic absorption spectrometry. 4-Ethyl-1(2-(4-(4-nitrophenyl)piperazin-1-yl)acetyl)thiosemicarbazide) (NPPTSC) has been used for the first time as new chelating reagent. A mixture of ethanol (dispersive solvent) and carbon tetrachloride (extraction solvent) was used. Some parameters affecting the extraction procedure including the type and volume of the extracting and dispersive solvents, HNO₃ concentration, the chelating agent amount, volume of sample, and foreign ions have optimized. Also, the complex formation between gold ions and the ligand has been investigated in a methanol–water solution (1:1) using UV–visible spectrometry. The spectrophotometric titration data showed that of Au–NPPTSC complex composition was found to be 3:2. After optimizing the instrumental and experimental parameters, we achieved a detection limit of 1.5 µg L^?1, a preconcentration factor of 50, and a linear dynamic range of 10.0–400.0 µg L^?1. The relative standard deviation obtained 2.1% at 50 µg L^?1 for gold ions (n = 10). The proposed method was successfully performed for the determination of gold in certified reference material, environmental water, and ore samples.     

Hydrogen sulfide determination by solid surface luminescence

In the analytical system suggested, atmospheric hydrogen sulfide reacts with the surface of a filter paper treated with aqueous cadmium chloride and yields a luminescent species whose intensity can be correlated with the analyte concentration in ambient air. It was shown that the luminescent species are CdS solid particles which were formed in a well defined size. The paper luminescence was also tried on polymeric surfaces; polyethyleneoxide, polyvinyl alcohol, ethylcellulose and carboxymethylcellulose were found to give a similar luminescence signal. The system can be used on the tip of an optical fiber for an irreversible, cumulative type of analytical device for hydrogen sulfide determination. The 3s detection limit for the paper luminescence detection system was 7.8 ppb H(2)S.     

PLGA encapsulation and radioiodination of indole-3-carbinol: investigation of anticancerogenic effects against MCF7, Caco2 and PC3 cells by in vitro assays

Encapsulation with PLGA of I3C and radioiodination have been performed. Anticancerogenic effects of I3C and I3C-PLGA have been investigated utilizing in vitro methods on breast adenocarcinoma epithelial (MCF7), colon adenocarcinoma epithelial (Caco2), prostate carcinoma epithelial (PC3) cells. Characterization of I3C-PLGA have been performed with DLS method and SEM analysis. I3C and I3C-PLGA compounds have been radiolabeled in high yields with ¹³¹I which is widely used for diagnosis and treatment in Nuclear Medicine. All experimental results demonstrated that radioiodinated compounds are promising in order to be used in Nuclear Medicine as well as present study contributed previously reported studies.     

Speciation of Cr(III) and Cr(VI) in Environmental Samples after Solid Phase Extraction on Amberlite XAD–2000

A method for speciation of Cr(III) and Cr(VI) in real samples has been developed. Cr(VI) has been separated from Cr(III) and preconcentrated as its pyrrolidinedithiocarbamate (APDC) complex by using a column containing Amberlite XAD–2000 resin and determined by FAAS. Total chromium has also been determined by FAAS after conversion of Cr(III) to Cr(VI) by oxidation with KMnO₄. Cr(III) has been calculated by subtracting Cr(VI) from the total. The effect of pH, flow‐rate, adsorption and batch capacity and effect of various metal cations and salt anions on the sorption onto the resin were investigated. The adsorption is quantitative in the pH range of 1.5–2.5, and Cr(VI) ion was desorbed by using H₂SO₄ in acetone. The recovery of Cr(VI) was 97 ± 4 at a 95% confidence level. The highest preconcentration factor was 80 for a 200 mL sample volume. The adsorption and batch capacity of sorbent were 7.4 and 8.0 mg g^?1 Cr(VI), respectively, and loading half time was 5.0 min. The detection limit of Cr(VI) is 0.6 μg/L. The procedure has been applied to the determination and speciation of chromium in stream water, tap water, mineral spring water and spring water. Also, the proposed method was applied to total chromium preconcentration in microwave digested moss and rock samples with satisfactory results. The developed method was validated with CRM‐TMDW‐500 (Certified Reference Material Trace Metals in Drinking Water) and BCR‐CRM 144R s (Certified Reference Material Sewage Sludge, Domestic Origin) and the results obtained were in good agreement with the certified values. The relative standard deviations were below 6%.     

Kinetics and mechanism of aqueous oxidation of H2S by Fe+3

The reaction kinetics of aqueous oxidation of H₂S by Fe⁺³ is investigated at 25°C by spectrophotometric method. The study conducted at various reactant concentrations and pH revealed that the reaction proceeds according to complex‐series reactions involving polysulfides as intermediates. The reaction of each step is first order with respect to Fe⁺³ and hydrogen sulfide or polysulfide. A mechanism is proposed, involving sulfido and polysulfido radicals. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 331–335, 1999