Kinetics and mechanism of electron-induced splitting of a cyclobutane pyrimidine dimer with or without an electron acceptor

DNA repair has received heightened attention in recent years as ozone depletion threatens to significantly increase DNA damage by UVB radiation[1—6]. The major lesions formed in DNA by this radiation are cis-syn cyclobutane pyrimidine dimers, which are created by the linkage of two neighboring pyrimidine bases in DNA via C5-C5 and C6-C6 atoms by [2+2] cycloaddition[2,5—8]. This potentially lethal or mutagenic damage can be repaired either by the removal of the damaged bases by excisio…     

Metal foams: A survey

The current state-of-the-art in the development of cellular metal foams is reviewed, with focus on their fabrication, mechanical/thermal/acoustic properties, and potential applications as lightweight panels, energy absorbers, heat exchangers, and acoustic liners. Foam property charts with scaling relations are presented, allowing scoping and selection through the use of material indices.     

Analysis of inorganic mercury species associated with airborne particulate matter/aerosols: method development

This paper describes a method for speciation of Hg associated with airborne particulate matter. This method uses a mini-sampler for sample collection and analysis, thermal desorption for separating Hg species, and inductively coupled plasma mass spectrometry (ICP–MS) for identification and quantification of Hg. Coal fly ash spiked with different Hg compounds (e.g. Hg⁰, HgCl₂, HgO, and HgS) was used for qualitative calibration. A standard reference material with a certified value for Hg concentration was used to evaluate the method. When the temperature of the furnace was programmed at a linear rate of increase of 50° min^–1, different Hg compounds could clearly be separated. Three airborne particulate matter samples were collected in parallel in Toronto, ON, Canada and analyzed using this method. Reproducible results were obtained and Hg⁰, HgCl₂, HgO, and HgS species from these samples were detected.     

Determination of human IgG by solid-substrate room-temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing rhodamine 6G luminescent molecules

Luminescent 50-nm silicon dioxide nanoparticles containing both types of rhodamine 6G (R; particles denoted R-SiO₂) were synthesized by the sol–gel method. In the presence of Pb(Ac)₂ as a heavy atom perturber the particle can emit the intense and stable room-temperature phosphorescence (RTP) signal of R on a polyamide membrane, with _ex^max/_em^max=470/635 nm for R. Our research indicates that the specific immune reaction between goat-anti-human IgG antibody labeled with R-SiO₂ and human IgG can be carried out quantitatively on a polyamide membrane, and the phosphorescence intensity was enhanced after the immunoreaction. Thus a new method for solid-substrate room-temperature phosphorescence immunoassay (SS-RTP-IA) for determination of human IgG was established on the basis of antibody labeled with the nanoparticles containing binary luminescent molecules. The linear range of this method is 0.0624–20.0 pg spot^–1 of human IgG (corresponding to a concentration range of 0.156–50.0 ng mL^–1, sample volume 0.40 L spot^–1). The regression equations of the working curves are I_p=71.27+7.208m_IgG (pg spot^–1) (r=0.9996). Detection limits calculated as 3S_b/k are 0.022 pg spot^–1. Compared with the same IA using fluorescein isothiocyanate (FITC) as the marker the new method was more sensitive and had a wider linear range. After elevenfold replicate measurement RSD are 4.5 and 3.6% for samples containing 0.156 and 50.0 ng mL^–1 IgG, respectively. This method is sensitive, accurate, and of high precision.     

Assessing the biocompatibility of NiTi shape memory alloys used for medical applications

The present paper reviews aspects related to the biocompatibility of NiTi shape memory alloys used for medical applications. These smart metallic materials, which are characterised by outstanding mechanical properties, have been gaining increasing importance over the last two decades in many minimal invasive surgery and diagnostic applications, as well as for other uses, such as in orthodontic appliances. Due to the presence of high amounts of Ni, the cytotoxicity of such alloys is under scrutiny. In this review paper we analyse work published on the biocompatibility of NiTi alloys, considering aspects related to: (1) corrosion properties and the different methods used to test them, as well as specimen surface states; (2) biocompatibility tests in vitro and in vivo; (3) the release of Ni ions. It is shown that NiTi shape memory alloys are generally characterised by good corrosion properties, in most cases superior to those of conventional stainless steel or Co–Cr–Mo-based biomedical materials. The majority of biocompatibility studies suggest that these alloys have low cytotoxicity (both in vitro and in vivo) as well as low genotoxicity. The release of Ni ions depends on the surface state and the surface chemistry. Smooth surfaces with well-controlled structures and chemistries of the outermost protective TiO₂ layer lead to negligible release of Ni ions, with concentrations below the normal human daily intake.     

Passive sampling and/or extraction techniques in environmental analysis: a review

The current state-of-the-art of passive sampling and/or extraction methods for long-term monitoring of pollutants in different environmental compartments is discussed in this review. Passive dosimeters that have been successfully used to monitor organic and inorganic contaminants in air, water, sediments, and soil are presented. The application of new approaches to the determination of pollutants at the sampling stage is discussed. The main milestones in the development of passive techniques for sampling and/or extraction of analytes, and in biomonitors used in environmental analysis, are summarized in this review. Passive samplers and biomonitors are compared.     

Kinetic Modeling of the Decomposition of Carbon Tetrachloride in Thermal Plasma

Decomposition of carbon tetrachloride in a RF thermal plasma reactor was investigated in argon atmosphere. The net conversion of CCl₄ and the main products of its decomposition were determined from the mass spectrometric analysis of outlet gases. Flow and temperature profiles in the reactor were calculated and concentration profiles of the species along the axis of the reactor were estimated using a newly developed chemical kinetic mechanism, containing 12 species and 34 reaction steps. The simulations indicated that all carbon tetrachloride decomposed within a few microseconds. However, CCl₄ was partly recombined from its decomposition products. The calculations predicted 70\% net conversion of CCl₄, which was close to the experimentally determined value of 60\%. A thermodynamic equilibrium model also simulated the decomposition. Results of the kinetic and thermodynamic simulations agreed well above 2000 K. However, below 2000 K the thermodynamic equilibrium model gave wrong predictions. Therefore, application of detailed kinetic mechanisms is recommended for modeling CCl₄ decomposition under thermal plasma conditions.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Use of solid-phase extraction to enable enhanced detection of acyl homoserine lactones (AHLs) in environmental samples

A challenge for understanding the role of bacterial cell–cell signalling in the environment is the detection of those signals, which are often present in low (nmol L⁻¹) concentrations. We describe here a simple purification method, solid-phase extraction (SPE), for increasing the sensitivity of detection for one such group of signals, acyl homoserine lactones (AHLs), in environmental samples. Spiking of dried marine sponge tissue (Stylinos sp.) with AHLs resulted in detection down to 0.01 ppm for 3-oxo-hexanoyl homoserine lactone (3-oxo C₆-HSL) and 1 ppm for hexanoyl homoserine lactone (C₆-HSL). Compared with liquid extraction methods use of SPE resulted in twofold and tenfold improvements in sensitivity, respectively.