Controlled polymerization of (meth)acrylamides by atom transfer radical polymerization

Controlled polymerization of (meth)acrylamides was achieved by ATRP using the initiating system methyl 2‐chloropropionate/CuCl/tris(2‐dimethylaminoethyl)amine. Linear increase of molecular weights with conversion and low polydispersity (M_w/M_n < 1.2) were obtained in toluene, at room temperature, when N,N‐dimethylacrylamide was used as a monomer. However, the polymerization reached limited conversion, which could be enhanced by increasing the catalyst/initiator ratio. The limited conversion is not due to the loss of the active chains, but rather to the loss of activity of the catalytic system.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.     

Polytriphenylamines synthesized by interfacial and microemulsion oxidative polymerization

Two triphenylamine-based polymers were successfully prepared by the interfacial and microemulsion oxidative polymerization of triphenylamine and 4-(diphenylamino)benzyl 2-bromo-2-methylpropanoate. Ammonium peroxodisulfate ((NH₄)₂S₂O₈) was used as a chemical oxidant and dichloromethane/water was used as a solvent. Sodium dodecyl benzene sulfonate was employed as a surfactant in the microemulsion system. Polytriphenylamines were characterized via Fourier transform infrared (FTIR) spectra and ¹H-NMR and UV–vis absorption spectroscopy. Molecular weights were determined by gel permeation chromatography and redox properties were studied by cyclic voltammetry. The surface morphology of thin polymer films was determined by atomic force microscopy.     

Hydrogen bonding-based 3D supramolecular architecture of [Cu(CHA)2][TCM]·11H2O

Reaction of Na₄TCM (1) (H₄TCM = tetra[4-(carboxyphenyl)oxamethyl]methane) with [Cu(CHA)](ClO₄)₂ (2)(CHA = 1,3,6,8,11,14-hexaaz atricyclo[12.2.1.1.^8,11] octadecane) in a DMF-water mixture yields [Cu(CHA)]₂[TCM] (3). Structural analysis of [Cu(CHA)]₂[TCM]·11H₂O (3·11H₂O) by single crystal X-ray diffraction reveals strong copper-oxygen bonds between two complex cations and the tetraanion leading to a 3D coordination network (zwitterionic structure), consolidated through additional NH...O=C hydrogen bonding within the cation/anion association. The resulting coordination geometry around a copper atom is a distorted square pyramidal with an oxygen atom of the anionic ligand in the apical position. A 3D supramolecular network is developed in the crystal based only on NH...OC hydrogen bonds between the macrocyclic metallic tecton and the carboxylate groups of neighboring 3D coordinated (zwitterionic) moieties. The pseudotetrahedral TCM^4? tetraanionic ligand induces a diamondoid architecture formed of large distorted adamantanoid cages.      

Aperiodic metal–organic frameworks

Metal–organic frameworks (MOFs) represent one of the most diverse structural classes among solid state materials, yet few of them exhibit aperiodicity, or the existence of long-range order in the absence of translational symmetry. From this apparent conflict, a paradox has emerged: even though aperiodicity frequently arises in materials that contain the same bonding motifs as MOFs, aperiodic structures and MOFs appear to be nearly disjoint classes. In this perspective, we highlight a subset of the known aperiodic coordination polymers, including both incommensurate and quasicrystalline structures. We further comment upon possible reasons for the absence of such structures and propose routes to potentially access aperiodic MOFs.

This perspective discusses progress and future directions in metal–organic frameworks with aperiodic structures. Reported quasicrystalline and incommensurate materials are presented, and pathways towards designing new such materials are provided.     

Characterisation of nickel–zinc ferrite/silica nanocomposites with low ferrite concentration obtained by an improved modified sol–gel method

The paper presents a study regarding the structure, morphology and magnetic behaviour of x% (Ni_0.65Zn_0.35Fe₂O₄)/(100 − x)% SiO₂ ferrimagnetic nanocomposites for low Ni–Zn ferrite concentration (x = 5, 10, 15, 20 and 30 mass percent) obtained by an improved modified sol–gel method. The obtained gels and nanocomposites have been characterized by fast Fourier transform-infrared (FT-IR) spectrometry, X-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements (MM). The addition of a supplementary quantity of diol in the synthesis, corresponding to a molar ratio EG : TEOS = 1:1, and the control of the thermal treatment applied to the precursor xerogels tetraethylortosilicate (TEOS)–metal nitrates (MN)–ethylene glycol (EG) leads to fine (~2–9 nm), almost spherical Ni–Zn ferrite nanoparticles homogenously dispersed inside the amorphous SiO₂ matrix. TEM images reveal the fine nature and the narrow size distribution of the ferrite nanoparticles. Nanoparticles diameter increases with the ferrite concentration and with the annealing temperature. For all concentrations of ferrite in SiO₂ and all annealing temperature, we have obtained Ni_0.65Zn_0.35Fe₂O₄ ferrite as single phase (proven by XRD) in the amorphous silica matrix, only after a pre-treatment of synthesized gels, at 573 K, for 3 h. The magnetic behaviour of ferrite nanoparticles in quasi-static magnetic fields is very particular, depending on the annealing temperature and the ferrite content in silica matrix. We have obtained superparamagnetic behaviour for the nanocomposites, for a concentration of 30% ferrite in SiO₂ at high annealing temperature, of 1,273 K.     

Electrically insulated molecular wires

This paper is an up-to-date mini-review based on literature data and own results regarding synthesis and properties of conducting (pseudo)rotaxane supramolecular structures. Conjugated polymers, such as polyarylene, polyheteroarylene, polyaniline, polyarylenevinylene or polyaryleneimine, were used as axle, while the macrocyclic components were cyclodextrins, cucurbiturils, cyclophanes or crown ethers. Properties of the supramolecular structure such as solubility, thermal or chemical stability, conductivity, etc. can be drastically modified by the inclusion of hydrophobic conjugated polymers inside the macrocycle, without any chemical modification. For instance, the photophysical properties (i.e. quantum yield of fluorescence and electroluminescence) of the supramolecular structures were enhanced when compared with uninsulated conjugated polymers. The doping process is also affected, because the access of a dopant to the conjugated chain is limited only to the uncovered domains of the conjugated chain.     

Novel nanocomposite membranes from cellulose acetate and clay‐silica nanowires

In this study, a new class of heterogeneous membranes based on cellulose acetate (CA) polymer and a complex filler clay‐silica nanowires (SiO₂NWs) was investigated for potential biomedical applications. SiO₂NWs were synthesized using natural clay through a facile sol–gel method and were dispersed in the polymer solution by sonication in the 1.25, 2.5, and 5% weight ratio to the CA acetate polymer. Membranes were subsequently prepared via phase inversion by precipitation of the CA polymer in water. The pristine CA membrane and SiO₂NWs based nanocomposites membranes were characterized using different characterization techniques. The presence of the SiO₂NWs in the CA membrane was found to significantly enhance the protein retention, water wettability and thermal as well as mechanical properties in comparison to the pristine CA membrane. Water flows studies at different temperatures and the retention of bovine serum albumin have been studied and the nanocomposite membranes were found to exhibit superior performances compared with the pristine CA membranes. SiO₂NWs‐CA membranes showed a much higher stability to the water temperature change during separation than CA membranes. Morphological changes clearly revealed that the composite membrane were much more compact than the pristine CA membranes. The rabbit dermal fibroblasts cell viability in cultures after 72 hr of incubation was found to be greater than 80%. These newly synthesized composite membranes exhibit a high potential to be used for various medical applications because of their non‐cytotoxic characteristics. Copyright © 2016 John Wiley & Sons, Ltd.     

From the Cube to the Dyck and Klein Tessellations: Implications for the Structures of Zeolite-like Carbon and Boron Nitride Allotropes

Geometrical transformations can be described which have the effect of multiplying the numbers of vertices in a trivalent polyhedron by three, four, or seven. Tripling the cube by the so-called leapfrog transformation gives the truncated octahedron. Quadrupling the cube followed by identifying the square faces to give a genus 3 surface gives the Dyck surface of 12 octagons. Septupling the cube by the so-called capra transformation followed by identifying the square faces to give a genus 3 surface gives the Klein surface of 24 heptagons. These geometrical transformations relate to the construction of low-density zeolite-like structures for carbon and boron nitride allotropes based on a cubic lattice