NaGaS2: An Elusive Layered Compound with Dynamic Water Absorption and Wide‐Ranging Ion‐Exchange Properties

Most ternary sulfides belonging to the MGaS₂ structure‐type have been known for many years and are well‐characterized. Surprisingly, there have been no reports of the NaGaS₂ composition, which contains Na, a monovalent cation slightly larger in size than Li, found in LiGaS₂, a compound known for its non‐linear optical properties. Now it is demonstrated for the first time that the unique reversible water absorption in NaGaS₂ has resulted in its absence from previous reports owing to difficulties encountered when characterizing this compound by SC XRD. The layered structure of this compound coupled with uniquely easy migration of water molecules between the layers allows for ion exchange with 3d and 5f metal cations. Some cations, for example, Ni²⁺, facilitate exfoliation of the layers, providing a facile synthetic route to a new class of 2D chalcogenide materials and furthermore demonstrating that NaGaS₂ can readily uptake uranyl species from aqueous solutions.     

Gas Phase Formation of Methylgermylene (HGeCH3)

The methylgermylene species (HGeCH₃; X¹A′) has been synthesized via the bimolecular gas phase reaction of ground state methylidyne radicals (CH) with germane (GeH₄) under single collision conditions in crossed molecular beams experiments. Augmented by electronic structure calculations, this elementary reaction was found to proceed through barrierless insertion of the methylidyne radical in one of the four germanium-hydrogen bonds on the doublet potential energy surface yielding the germylmethyl (CH₂GeH₃; X²A′) collision complex. This insertion is followed by a hydrogen shift from germanium to carbon and unimolecular decomposition of the methylgermyl (GeH₂CH₃; X²A′) intermediate by atomic hydrogen elimination leading to singlet methylgermylene (HGeCH₃; X¹A′). Our investigation provides a glimpse at the largely unknown reaction dynamics and isomerization processes of the carbon-germanium system, which are quite distinct from those of the isovalent carbon system thus providing insights into the intriguing chemical bonding of organo germanium species on the most fundamental, microscopic level.     

Investigation of Metastable Low Dimensional Halometallates

The solvothermal synthesis, structure determination and optical characterization of five new metastable halometallate compounds, [1,10-phenH][Pb_3.5I₈] (1), [1,10-phenH₂][Pb₅I₁₂]·(H₂O) (2), [1,10-phen][Pb₂I₄] (3), [1,10-phen]₂[Pb₅Br₁₀] (4) and [1,10-phenH][SbI₄]·(H₂O) (5), are reported. The materials exhibit rich structural diversity and exhibit structural dimensionalities that include 1D chains, 2D sheets and 3D frameworks. The optical spectra of these materials are consistent with bandgaps ranging from 2.70 to 3.44 eV. We show that the optical behavior depends on the structural dimensionality of the reported materials, which are potential candidates for semiconductor applications.     

Molecular Characteristics and Antioxidant Activity of Spruce (Picea abies) Hemicelluloses Isolated by Catalytic Oxidative Delignification

Spruce (Picea abies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.     

Modified Ceria-Zirconia Fluorite-Like Catalysts for the Combustion of Methane

For dispersed ceria-zirconia-based solid solutions prepared via the polymerized complex method and annealed at 700℃, effects of bulk doping by Ca, Mn, Co, Bi or Nb cations and surface modification by Mn and Pt on their structural features, surface/bulk oxygen reactivity and catalytic activity in methane combustion are considered. With up to 20 mol% doping, a structural type of homogeneous solid solutions of anion-deficient fluorite with disordered anion vacancies is formed. Doping by transition metal cations or Pt increases the mobility and reactivity of the surface/bulk oxygen. A broad variation in specific rates of methane combustion for the studied systems was observed, suggesting structural sensitivity of this reaction. In general, there is no universal relationship between the oxygen mobility, the reactivity and the catalytic activity in methane combustion, which is explained by the factor of specific methane activation on surface active sites. For the Pt-promoted samples, Pt efficiency in methane activation depends on the Pt-support interaction, and the most favorable ones being mixed Pt/MnOx and Pt/NbOx clusters on the surface of the supports that exhibit high lattice oxygen mobilities.     

Heat capacity equations for nonstoichiometric solids

The equations for heat capacity measured under isodynamical conditions (fixed activity of a single component) are derived for partly open systems exchanging one component with the surroundings while keeping the contents of all other components constant. Compared to conventional isobaric (and isoplethal) heat capacity of a strictly stoichiometric phase, the isodynamical heat capacity of a nonstoichiometric phase is found to involve two additional terms—the saturation contribution due to incorporation (or release) of the free component and the contribution due to deviation from stoichiometry reflecting a different number of the involved phonon modes (due to different free component content) and in some cases a variation of free component incorporation mechanism.