Ferrocene Compounds. XXXI. Structure of 3-Ferrocenylpropanoic Acid

The title compound was prepared by modified procedure and characterized by means of IR, [¹H] and [¹³C] NMR spectroscopy. The structure was also determined by a single-crystal X-ray diffraction (XRD). 3-Ferrocenylpropanoic acid crystallizes as orange prisms in the triclinic space group P with a = 7.645(1) Å, b = 7.953(1) Å, c = 9.961(1) Å, = 81.67(1), = 68.43(1), = 83.76(1), V = 556.3(1) ų, Z = 2, R = 0.0435. In the ferrocene skeleton, Fe-C distances are in the range 2.033(2)–2.052(2) Å and C C distances in the range 1.412(5)–1.431(3) Å. The angle defined by ring centers and Fe atom is 177.7(1). The cyclopentadienyl rings are twisted from the eclipsed conformation by 8.3(2) (average value). In the structure was observed strong intermolecular hydrogen bond of 2.670(3) Å forming cyclic dimers of the R₂ ² (8) type.     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.     

Experimental and theoretical study of the structure of N,N-dimethyl-4-nitroaniline derivatives as model compounds for non-linear optical organic materials

Molecular and crystal structure of a series of derivatives of N,N-dimethyl-4-nitroaniline has been studied by both X-ray diffraction method and high-level ab initio calculations. According to these data, the dimethylamino groups were found to have a trigonal-pyramidal configuration and are considerably turned with respect to the ring plane in all molecules having a substituent in the ortho-position; on the contrary, this group is planar in the meta-substituted molecules. Topological analysis of the electron density function for all molecules studied within the framework of Bader's ‘atoms in molecules’ (AIM) theory revealed that introduction of a substituent into the ortho- or meta-position of the ring results in increasing of the contribution of the resonance forms different from the quinoid one. Contribution of the latter form is predominant for the structure of N,N-dimethyl-4-nitroaniline (1). Topological analysis of the electron density distribution was used to explain a decreasing of the molecular hyperpolarisabilites of the ortho- and meta-substituted compounds as compared with those for 1.     

The psuedo‐michael reaction of 2‐aminoimidazolines 2. Part 1. Synthesis and structure assignment of isomeric 5(1H)‐Oxo and 7(1H)‐Oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates

The pseudo‐Michael reaction of 1‐aryl‐2‐aminoimidazolines‐2 with diethyl ethoxymethylenemalonate (DEEM) was investigated. Extensive structural studies were performed to confirm the reaction course. For derivatives with N1 aromatic substituents, it was found that the reaction course was temperature dependent. When the reaction temperature was held at ?10 °C only the formation of 1‐aryl‐7(1H)‐oxo‐2,3‐dihydroimi‐dazo[1,2‐a]pyrimidine‐6‐carboxylates ( 4 ) was observed in contrast to earlier suggestions. Under the room temperature conditions, the same reaction yielded mixtures, with varying ratio, of isomeric 1‐aryl‐7(1H)‐oxo‐ ( 4a‐4f ) and 1‐aryl‐5(1H)‐oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates ( 5a‐5f ). The molecular structure of selected isomers, 4b and 5c , was confirmed by X‐ray crystallography. Frontal chro‐matography with delivery from the edge was applied for the separation of the isomeric esters. The isomer ratio of the reaction products depended on the character of the substituents on the phenyl ring. The 1‐aryl‐7(1H)‐oxo‐carboxylates ( 4a‐4f ) were preferably when the phenyl ring contained H, 4‐CH₃, 4‐OCH₃ and 3,4‐Cl₂ substituents. Chloro substitution at either position 3 or 4 in the phenyl ring favored the formation of isomers 5a‐5f . The isomer ratios were confirmed both by ¹H NMR and chromatography. The reaction of the respective hydrobromides of 1‐aryl‐2‐aminoimidazoline‐2 with DEEM, in the presence of triethylamine, gave selectively 5(1H)‐oxo‐esters ( 5a‐5f ).     

New green fluorescent polyvinylcarbazole copolymer with 1,8‐naphthalimide side chains as chemosensor for iron cations

The synthesis and basic photophysical characteristics of a novel green fluorescent polyvinylcarbazole polymer containing 4‐N,N‐dimethylaminoethyleneamino‐1,8‐naphthalimide side chains has been described. The ability to sense metal cations has been monitored by fluorescence emission spectroscopy. It is shown that the fluorescent intensity is very sensitive to the Fe²⁺ cations and the copolymer can be used as an homogeneous and heterogeneous fluorescent sensor for Fe²⁺ cations. Copyright © 2004 John Wiley & Sons, Ltd.     

Intramolecular cycloaddition/cycloreversion of (E)-3β,17β-diacetoxy-5,10-secoandrost-1(10)-en-5-one

Treatment of 3β,17β-diacetoxy-5,10-secoandrost-1(10)-en-5-one with BF₃·Et₂O was shown to proceed with cleavage of the macrocycle and formation of a new compound containing a cyclopentenone ring. Based on DFT calculations, an intramolecular Lewis acid promoted [2+2]cycloaddition, followed by a cycloreversion of the intermediate oxetane, is proposed as a possible reaction mechanism.     

Structure and reactivity of bis(silyl) dihydride complexes (PMe(3))(3)Ru(SiR(3))(2)(H)(2): model compounds and real intermediates in a dehydrogenative C-Si bond forming reaction

A series of stable complexes, (PMe(3))(3)Ru(SiR(3))(2)(H)(2) ((SiR(3))(2) = (SiH(2)Ph)(2), 3a; (SiHPh(2))(2), 3b; (SiMe(2)CH(2)CH(2)SiMe(2)), 3c), has been synthesized by the reaction of hydridosilanes with (PMe(3))(3)Ru(SiMe(3))H(3) or (PMe(3))(4)Ru(SiMe(3))H. Compounds 3a and 3c adopt overall pentagonal bipyramidal geometries in solution and the solid state, with phosphine and silyl ligands defining trigonal bipyramids and ruthenium hydrides arranged in the equatorial plane. Compound 3a exhibits meridional phosphines, with both silyl ligands equatorial, whereas the constraints of the chelate in 3c result in both axial and equatorial silyl environments and facial phosphines. Although there is no evidence for agostic Si-H interactions in 3a and 3b, the equatorial silyl group in 3c is in close contact with one hydride (1.81(4) A) and is moderately close to the other hydride (2.15(3) A) in the solid state and solution (nu(Ru.H.Si) = 1740 cm(-)(1) and nu(RuH) = 1940 cm(-)(1)). The analogous bis(silyl) dihydride, (PMe(3))(3)Ru(SiMe(3))(2)(H)(2) (3d), is not stable at room temperature, but can be generated in situ at low temperature from the 16e(-) complex (PMe(3))(3)Ru(SiMe(3))H (1) and HSiMe(3). Complexes 3b and 3d have been characterized by multinuclear, variable temperature NMR and appear to be isostructural with 3a. All four complexes exhibit dynamic NMR spectra, but the slow exchange limit could not be observed for 3c. Treatment of 1 with HSiMe(3) at room temperature leads to formation of (PMe(3))(3)Ru(SiMe(2)CH(2)SiMe(3))H(3) (4b) via a CH functionalization process critical to catalytic dehydrocoupling of HSiMe(3) at higher temperatures. Closer inspection of this reaction between -110 and -10 degrees C by NMR reveals a plethora of silyl hydride phosphine complexes formed by ligand redistribution prior to CH activation. Above ca. 0 degrees C this mixture converts cleanly via silane dehydrogenation to the very stable tris(phosphine) trihydride carbosilyl complex 4b. The structure of 4b was determined crystallographically and exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si.HRu interactions are not indicated in the structure or by IR, the HSi distances (2.00(4) - 2.09(4) A) and average coupling constant (J(SiH) = 25 Hz) suggest some degree of nonclassical SiH bonding in the RuH(3)Si moiety. The least hindered complex, 3a, reacts with carbon monoxide principally via an H(2) elimination pathway to yield mer-(PMe(3))(3)(CO)Ru(SiH(2)Ph)(2), with SiH elimination as a minor process. However, only SiH elimination and formation of (PMe(3))(3)(CO)Ru(SiR(3))H is observed for 3b-d. The most hindered bis(silyl) complex, 3d, is extremely labile and even in the absence of CO undergoes SiH reductive elimination to generate the 16e(-) species 1 (DeltaH(SiH)(-)(elim) = 11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(elim) = 40 +/- 2 cal x mol(-)(1) x K(-)(1); Delta = 9.2 +/- 0.8 kcal x mol(-)(1) and Delta = 9 +/- 3 cal x mol(-)(1).K(-)(1)). The minimum barrier for the H(2) reductive elimination can be estimated, and is higher than that for silane elimination at temperatures above ca. -50 degrees C. The thermodynamic preferences for oxidative additions to 1 are dominated by entropy contributions and steric effects. Addition of H(2) is by far most favorable, whereas the relative aptitudes for intramolecular silyl CH activation and intermolecular SiH addition are strongly dependent on temperature (DeltaH(SiH)(-)(add) = -11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(add) = -40 +/- 2 cal.mol(-)(1) x K(-)(1); DeltaH(beta)(-CH)(-)(add) = -2.7 +/- 0.3 kcal x mol(-)(1) and DeltaS(beta)(-CH)(-)(add) = -6 +/- 1 cal x mol(-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta = -1.8 +/- 0.8 kcal x mol(-)(1) and Delta = -31 +/- 3 cal x mol(-)(1).K(-)(1); Delta = 16.4 +/- 0.6 kcal x mol(-)(1) and Delta = -13 +/- 6 cal x mol(-)(1).K(-)(1). The relative enthalpies of activation (-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta (H)SiH(add) = 1.8 +/- 0.8 kcal x mol(-)(1) and Delta S((SiH-add) =31+/- 3 cal x mol(-)(1) x K(-)(1); Delta S (SiH -add) = 16.4 +/- 0.6 kcal x mol(-)(1) and =Delta S (SiH -CH -add) =13+/- 6 cal x mol(-)(1) x K(-)(1). The relative enthalpies of activation are interpreted in terms of strong SiH sigma-complex formation - and much weaker CH coordination - in the transition state for oxidative addition.     

Does charge carrier dimensionality increase in mixed-valence salts of tetrathiafulvalene-terminated dendrimers?

[structure: see text] In four new dendrimers terminated by 12 electroactive tetrathiafulvalenyl substituents, the tridimensional character of the inter- and intradendrimeric charge and electron transfer, and hence of the electroconductivity, is evidenced by examination of the electronic spectra of their corresponding neutral state and cation radical, dication, and mixed-valence salts, including a closed-shell anion.     

A convenient route to 1-(2-oxiranyl)-1,4-diketones and their application to the synthesis of endo-brevicomin, endo-isobrevicomin, frontalin and related compounds via alkylated 6,8-dioxabicyclo[3.2.1]octan-2-ones

1-(2-Oxiranyl)-1,4-alkanediones were prepared from the ethylene acetals of ethyl 4-oxoalkanoates via the oxidation of the intermediate 1,2-dialkylcyclopropanols having a protected carbonyl group in an aliphatic chain. Intramolecular acetalization of these epoxy dicarbonyl compounds gave alkylated 6,8-dioxabicyclo[3.2.1]octan-2-ones in good yields. The latter were found suitable to be precursors for (±)-endo-brevicomin and its 2-hydroxy derivative, as well as (±)-endo-isobrevicomin and (±)-frontalin.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.