Toward the synthesis of incargranine B and seneciobipyrrolidine. Synthesis of octahydro-dipyrroloquinoline skeleton via dipolar cycloaddition/amination sequence

Octahydro-dipyrroloquinoline skeleton is the building component of a very few naturally occurring compounds. Nevertheless, these natural products have been attractive synthetic targets, and their study commanded development of efficient synthesis of this core. While the reported methods are based on the dimerization procedure of N-arylpyrrolidines of N-arylhomopropargyl amines, our approach relay on dipolar cycloaddition/amination sequence. This strategic approach allows sequential introduction of aromatic moieties increasing the product diversity and hence may be useful in further exploration of incargranine B or seneciobipyrrolidine derivatives.     

Determining binding constants for 1:1 and 1:2 inclusion complexes of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin by affinity capillary electrophoresis

The complexation of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was studied by mobility shift affinity CE. Electrophoretic mobility for triangular peaks was calculated using the parameter a₁ of the Haarhoff–Van der Linde function instead of the peak top time. Dependences of the viscosity corrected electrophoretic mobility on HP-β-CD concentration were not described on the basis of only complexes with 1:1 stoichiometry due to the fact that these binding curves did not reach a plateau. However, the dependences were well described taking into account both 1:1 and 1:2 complexes. The presence of higher order equilibria was also revealed by x-reciprocal plots. The values of apparent binding constant logarithm, obtained for the first time, for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-diphthalate and betulin 3,28-disuccinate with 95% confidence interval limits in brackets are the same within error and are equal to 4.85 (4.73–4.95), 8.56 (7.75–8.82), 4.92 (4.86–4.97), and 8.54 (8.23–8.72) at 25°C, respectively. These values for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-disulfate at 25°C are 4.61 (4.57–4.64) and 7.11 (6.57–7.34), respectively. The binding constants for betulin 3,28-disulfate agree with the previously obtained results from the separation in the thermostatted capillary segment.     

Natural radioactivity in springs of Sverdlovsk region,Middle Urals,Russia

Journal of Radioanalytical and Nuclear Chemistry - Activity concentrations of natural radionuclides were determined in water from 31 springs of Sverdlovsk region, Middle Urals, Russia. Activity...     

A Regioselective Synthesis of Novel Functionalized Organochalcogen Compounds by Chalcogenocyclofunctionalization Reactions Based on Chalcogen Halides and Natural Products

The regioselective synthesis of novel functionalized condensed organochalcogen compounds by chalcogenocyclofunctionalization reactions based on chalcogen halides and the natural products thymol and carvacrol has been developed. The reactions of selenium dibromide with allyl thymol and allyl carvacrol proceeded in methylene chloride at room temperature in the presence of NaHCO₃ affording bis[(7-isopropyl-4-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] and bis[(4-isopropyl-7-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] selenides in 90–92% yield. Similar sulfides were obtained in 70–72% yields by the reaction of sulfur dichloride in chloroform under reflux. Trihalotellanes containing the same organic moieties were synthesized from allyl thymol, allyl carvacrol and tellurium tetrachloride or tetrabromide in quantitative yields. Corresponding functionalized ditellurides were prepared in 91–92% yields by the reduction of the trichlorotellanes with sodium metabisulfite in two-phase solvent system. The comparison of reactivity of sulfur, selenium and tellurium halides in chalcogenocyclofunctionalization and distinguishing features of each reaction were discussed.     

Identification of extracellular nanoparticle subsets by nuclear magnetic resonance

Exosomes are a subset of secreted lipid envelope-encapsulated extracellular vesicles (EVs) of 50–150 nm diameter that can transfer cargo from donor to acceptor cells. In the current purification protocols of exosomes, many smaller and larger nanoparticles such as lipoproteins, exomers and microvesicles are typically co-isolated as well. Particle size distribution is one important characteristics of EV samples, as it reflects the cellular origin of EVs and the purity of the isolation. However, most of the physicochemical analytical methods today cannot illustrate the smallest exosomes and other small particles like the exomers. Here, we demonstrate that diffusion ordered spectroscopy (DOSY) nuclear magnetic resonance (NMR) method enables the determination of a very broad distribution of extracellular nanoparticles, ranging from 1 to 500 nm. The range covers sizes of all particles included in EV samples after isolation. The method is non-invasive, as it does not require any labelling or other chemical modification. We investigated EVs secreted from milk as well as embryonic kidney and renal carcinoma cells. Western blot analysis and immuno-electron microscopy confirmed expression of exosomal markers such as ALIX, TSG101, CD81, CD9, and CD63 in the EV samples. In addition to the larger particles observed by nanoparticle tracking analysis (NTA) in the range of 70–500 nm, the DOSY distributions include a significant number of smaller particles in the range of 10–70 nm, which are visible also in transmission electron microscopy images but invisible in NTA. Furthermore, we demonstrate that hyperpolarized chemical exchange saturation transfer (Hyper-CEST) with ¹²⁹Xe NMR indicates also the existence of smaller and larger nanoparticles in the EV samples, providing also additional support for DOSY results. The method implies also that the Xe exchange is significantly faster in the EV pool than in the lipoprotein/exomer pool.

Diffusion and xenon NMR based methods to determine a very broad range of sizes and sub-sets of extracellular vesicles.     

Synthesis and anion binding properties of 2,5-diamidothiophene polypyrrole Schiff base macrocycles

[reaction: see text] Two easy-to-synthesize polypyrrolic 2,5-diamidothiophene Schiff base macrocycles are reported, along with their anion binding properties as determined via UV-vis spectroscopic titrations carried out in dichloroethane. There is a striking difference between the interactions with anions of the two macrocycles, a finding ascribed to differences in their rigidity. For example, the more flexible dipyrromethane-derived macrocycle displays a 1.2:1 hydrogen sulfate versus nitrate selectivity, while its more rigid bipyrrole-derived congener shows a 7.4:1 selectivity in favor to hydrogen sulfate.     

Structure and photochemistry of 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione and its sodium and potassium complexes. Control of the ground-state conformation of 2-diazo-1,3-dicarbonyl fragment via host-guest complexation

[reaction: see text] The macrocyclic 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione (3-diazo-2,4-dioxo-19-crown-6, 1) readily forms complexes with potassium (2, stability constant in methanol is K(K+) = 229 +/- 25 M(-1)) and sodium ions (3, K(Na+) = 84.2 +/- 7.9 M(-1) in methanol). According to B3LYP/6-31G+(d,p) calculations and temperature-dependent 1H NMR spectroscopy, the predominant conformation of 1 has a Z,Z arrangement of the diazo and carbonyl groups. The X-ray crystal structure analysis showed that the potassium complex (2) has the same Z,Z arrangement, while the sodium analogue (2) exists in conformation with Z,E geometry of the diazodicarbonyl moiety. Direct 254 nm photolysis of diazo compounds 1-3 in methanol results in the formation of 3-methoxy-2,4-dioxo-19-crown-6 (5), the product of the insertion of corresponding alpha,alpha'-dicarbonylcarbene into the O-H bond of the solvent. The triplet-sensitized photolysis of diazomalonates 1-3 produces 2,4-dioxo-19-crown-6 (6), which is apparently formed via the triplet state of the intervening carbene.     

Metal ion binding by a bicyclic diamide: deep UV Raman spectroscopic characterization

Deep UV resonance Raman spectroscopy was used for characterizing ligand-metal ion complexes. The obtained results demonstrated a strong intrinsic sensitivity and selectivity of a Raman spectroscopic signature of a bicyclic diamide, a novel chelating agent for lanthanides and actinides (Lumetta, G. J.; Rapko, B. M.; Garza, P. A.; Hay, B. P.; Gilbertson, R. D.; Weakley, T. J. R.; Hutchison, J. E. J. Am. Chem. Soc. 2002, 124, 5644). Molecular modeling, which included structure optimization and calculation of Raman frequencies and resonance intensities, allowed for assigning all strong Raman bands of the bicyclic diamide as well as predicting the band shifts observed because of complex formation with metal ions. A comparative analysis of Raman spectra and the results of the molecular modeling could be used for elucidating the structure of complexes in solution.     

Evaluation of gamma irradiation effect on physico-chemical properties of a mixed beverage based in soy milk and grape juice

The effects of the main operation variables on the electrochemical oxidation of simulated tributyl phosphate (TBP) waste by a boron-doped diamond anode are individually studied. The optimum operating conditions are obtained as follows: 4 g L^?1 initial TBP concentration, 180 min degradation time, 40 mA cm^?2 current density, 0.5 mol L^?1 Na₂SO₄ as the supporting electrolyte, and unadjusted pH of the aqueous phase. Under such conditions, a chemical oxygen demand (COD) removal ratio of 82.3% is achieved, and the energy consumption is 26.16 kWh m^?3. A degradation mechanism of TBP is tentatively proposed.     

Influence of pH of solution on phase composition of samarium-strontium cobaltite powders synthesized by wet chemical technique

Powders of Sm_0.6Sr_0.4CoO_3-δ and La_0.6Sr_0.4CoO_3-δ were synthesized using wet chemical technique. Structural and surface properties of synthesized materials were studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), IR spectroscopy, and scanning electron microscopy (SEM). The influence of pH on the phase state, chemical composition, morphology, and fractal dimension of the synthesized powders were investigated. It was found that the change of pH has the influence on phase composition of synthesized powders. The increase of solution pH allows one to obtain homogeneous samples at lower temperatures down to 900–950?°C.

Open image in new window