Structural and electrical characterization of PZT on gold for micromachined piezoelectric membranes

Piezoelectric membranes have been fabricated that incorporate a gold bottom electrode with an adhesion layer of titanium–tungsten (10:90 wt. %). For solution-deposited acetic acid based lead zirconate titanate (HoAc-PZT) with a Zr:Ti ratio of 40:60, the film’s average piezoelectric coefficient, e₃₁, is -5.31 C/m², with a dielectric constant of 814 at 200 Hz, which is similar to values for platinum bottom electrodes. The PZT structure remains columnar on both types of bottom electrodes. Initial fabrication attempts resulted in cracking that initiated in the PZT layer of the structure. X-ray photoelectron spectroscopy was utilized to establish how processing affects diffusion throughout the composite membrane structure. Crack-free membranes were fabricated and tested. This paper discusses the performance properties and piezoelectric fatigue results for these membranes. PACS 77.84.-s; 77.84.Lf     

Synthesis and conformational study of 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines

A new class of endocyclic enamines, 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines, was synthesized from 4-piperidone imines by successive subjecting the latter to lithiation with lithium diethylamide, to alkylation with 1-bromo-3-chloropropane, and to intramolecular cyclization. All stages were carried out as a unique process without isolation of the intermediate compounds. A thorough optimization of the process conditions, workup, and product storage was carried out. The conformational study of 1,6-disubstituted 1,2,3,4,5,6,7,8-octahydro-1,6-naphthiridines was performed.     

Development of a RILIS ionisation scheme for gold at ISOLDE, CERN

At the ISOLDE on-line isotope separation facility, the resonance ionisation laser ion source (RILIS) can be used to ionise reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionisation of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can provide beams of a chosen isotope with greatly reduced isobaric contamination. With the addition of a new three-step ionisation scheme for gold, the RILIS is now capable of ionising 26 of the elements. The optimal scheme was determined during an extensive study of the atomic energy levels and auto-ionising states of gold, carried out by means of in-source resonance ionisation spectroscopy. Details of the ionisation scheme and a summary of the spectroscopy study are presented.     

Experimental consequences ofSU(3) symmetry in ans d g Boson Model

Energies of collective levels in¹⁷⁸Hf and²³⁴U are compared with predictions of theSU (3) limit of thesdg Interacting Boson Model. All known positive parity states of¹⁷⁸Hf below 1.8 MeV (with the exception of a 0⁺ band) have been satisfactorily reproduced. Most of the bands in²³⁴U are also described by the model. However, a few predicted states have no experimental counterpart. The introduction of theg-bosons strongly reduces the previously observed discrepancies between experimentalB(E2)'s in²³⁸U and thesd-IBM calculation.     

Evaluating Zn2SiO4:Mn phosphor for use in medical imaging radiation detectors

2 SiO₄:Mn phosphor was evaluated for use in radiation detectors of medical imaging systems. Zn₂SiO₄:Mn was used in the form of laboratory-prepared fluorescent layers (screens) with coating weights from 18 to 150 mg/cm². The phosphor was excited to luminescence by low-energy X-raysusing X-raytube voltages ranging from 15 to 50 kVp. The number of emitted optical photons per incident X-rayquantum was thus determined for various X-rayenergies and phosphor coating weights. The optical emission spectrum was also measured and it was used to evaluate the spectral compatibility of Zn₂SiO₄:Mn with radiographic films, photocathodes and the Si photodiode. Finally, phosphor optical properties were estimated by fitting a theoretical model to experimental data. Results showed that Zn₂SiO₄:Mn is more efficient for low-energy X-rays. Its intrinsic conversion efficiency was found equal to 0.08, which is comparable to that of actually used phosphors. Zn₂SiO₄:Mn was also adequately compatible with orthochromatic films and the ES-20 photocathode, thus being appropriate for low-voltage radiography and fluoroscopy. Received: 31 July 1998/Accepted: 3 August 1998     

Investigation by ellipsometry of the damage in GaAs bombarded with low-energy Ar ions

The crystalline-amorphous transition in GaAs induced by Ar ions (energy 1–3 keV) has been investigated using single-wavelength ellipsometry. The experiments have been performed in-situ at room temperature. Ion damage straggling, amorphization threshold and critical energy density have been derived by means of a simple analytical model for the growth of the amorphous layer. This model is discussed and the corresponding calculations are found to be in satisfactory agreement with experimental data.     

QCD corrections to the forward-backward asymmetries of c and b quarks at the Z pole

Measurements of the forward-backward production asymmetry of heavy quarks in Z decays provide a precise determination of . The asymmetries are sensitive to QCD effects, in particular hard gluon radiation. In this paper QCD corrections for and are discussed. The interplay between the experimental techniques used to measure the asymmetries and the QCD effects is investigated using simulated events. A procedure to estimate the correction needed for experimental measurements is proposed, and some specific examples are given. Received: 26 February 1998 / Published online: 2 June 1998     

One-loop divergences of linear gravity with torsion terms

We investigate the role of the torsion field at the quantum level. One-loop counterterms are calculated in the theory with terms quadratic in the torsion field. We have shown that the theory is finite at the one-loop level.