Strained Ammonium Precursors for Radiofluorinations

The increasing application of positron emission tomography (PET) in nuclear medicine has stimulated the extensive development of a multitude of novel and versatile techniques to introduce fluorine-18, especially for the radiolabelling of biologically or pharmacologically active molecules. Taking into consideration that the introduction of fluorine-18 (t_1/2=109.8 min) mostly proceeds under harsh conditions, radiolabelling of such molecules represents a challenge and is of enormous interest. Ideally, it should proceed in a regioselective manner under mild physiological conditions, in an acceptable time span, with high yields and high specific activities. Special attention has been drawn to 2-fluoroethyl and 3-fluoropropyl groups, which are often the active sites of radiofluorinated compounds. Precursors containing an ammonium leaving group – such as a strained azetidinium or aziridinium moiety – can help to overcome these obstacles leading to a convenient and mild introduction of [¹⁸F]fluoride with high radiochemical yields.     

Insights into MWCNTs/polyimide nanocomposites: from synthesis to application as free-standing flexible electrodes in low-cost micro-supercapacitors

In the pursuit to enlarge the library of polyimide materials for energy applications, new polyimide/MWCNTs composite films have been developed by MWCNTs-assisted polycondensation reaction of a hydroxyl and triphenylmethane-containing diamine with benzophenone tetracarboxylic dianhydride targeting to highlight their electrical storage capability as flexible electrodes in micro-supercapacitors (mSCs). The Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance, UV–vis, fluorescence, and Raman spectroscopies were used to demonstrate the evolution of interfacial interactions between MWCNTs and the precursors (diamine monomer and intermediate polyamidic acid) and polyimide matrix that proved to be the origin of MWCNTs homogeneous dispersion. Thus, composite films incorporating 1, 3, 5, and 10 w.t.% MWCNTs were obtained and thoroughly investigated with regard to their morphology, mechanical behavior, thermal stability, and electrical conductivity. The electrochemical performance of these composites was first analyzed in a classical three-electrode cell by cyclic voltammetry and galvanostatic charge-discharge in both aqueous and organic electrolyte systems. By far, the best electrical storage capacity was obtained with the composite polyimide film containing 10% MWCNTs that was further used as both active material and current collector in a flexible symmetric mSC realized by a straightforward and low-cost procedure. In the attempt to better exploit the advantages of this composite film, it was layered with a graphite-containing paint and tested as an electrode in a flexible mSC, which provided satisfactory results. To our knowledge, this is the first report on the electrical charge storage capability of a polyimide/MWCNTs free-standing film as a flexible electrode in mSCs, which do not require time- and resource-consuming processing steps.     

Cyclization and rearrangements of diterpenoids. IX. Isomerization of (1R,2S,7S,10S,11R,12S,13S)-2,6,6,10,12-pentamethylpentacyclo[10.2.1.01,10.02,7.011,13]pentadecane by fluorosulfonic acid

It has been shown that the opening of the cyclopropane ring in (1R, 2S, 7S, 10S, 11R, 12S, 13S)-2,6,6,10,12-pentamethylpentacyclo[10.2.1.0^1,10.0^2,7.0^11,13]pentadecane takes place under the action of fluorosulfonic acid at all three carbon-carbon bonds, but at low temperatures the main isomerization product is (1R, 2S, 7S, 10S, 12S, 13S)-2,6,6,10,12-pentamethyltetracyclo[10.2.1.0^1,10.0^2,7]pentadecan-13-ol, and at the ordinary temperature the main products are (1R, 2S, 7S, 11S, 12R, 13R)-2,6,6,11,13-pentamethyltetracyclo[10.2.1.0^1,10.0^2,7]pentadeca-9-ene and (1S, 2R, 11S, 12R, 15R)-2,7,7,11,15-pentamethyltetracyclo[10.2.1.0^2,11.0^3,8]pentadeca-3(8)-ene.Institute of Chemistry, Moldavian SSR Academy of Sciences, Kishinev. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 497–500, July–August, 1989.     

Nanocrystals grown in amorphous Cr and CrNi thin films

The structure of vacuum annealed amorphous sputtered Cr and CrNi (55:45) thin films has been studied by transmission electron microscopy (TEM) and electron diffraction (TED). The thin films with thicknesses ranging from 150 to 600 Å were annealed while still on their alkali halide substrates under high vacuum at temperatures ranging from 200 to 370°C. The TEM and TED data permitted to establish the annealing conditions (temperature, duration), which lead to the nucleation and growth of nanosized crystals in the Cr and CrNi icosahedral glasses.     

Synthesis of 8α-acetoxydriman-11-oic acid

A five-stage synthesis of 8α-acetoxydriman-11-oic acid from the readily available bicyclohomofarnesane-8α,12-diol has been developed.     

Chloroplast Biogenesis 77: Two Novel Monovinyl and Divinyl Light-Dark Greening Groups of Plants and Their Relationship to the Chlorophyll a Biosynthetic Heterogeneity of Green Plants

Abstract— On the basis of the steady-state accumulation of divinyl (DV) or monovinyl (MV) protochlorophyllide (Pchlide) a in darkness (D) or in the light (L), green plants have been classified into three different greening groups namely dark divinyl-light divinyl (DDV-LDV), dark monovinyl-light divinyl (DMV-LDV) and dark monovinyl-light monovinyl (DMV-LMV) (Ionannides et al., Biochem. Syst. Ecol. 22, 211-220,1994). Interruption of the L phase of the photoperiod by a brief period of darkness (LD condition) revealed a predominance of different chlorophyll (Chl) a biosynthetic routes, depending upon the greening group affiliation of the plant species. For example, in DMV-LDV and DMV-LMV plants, the predominant Chl a biosynthetic routes under the LD condition appear to be the MV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Pchlide a. On the basis of DV and MV Pchlide a accumulation rates after re-darkening, this greening group is designated as a light-dark MV (LDMV) subgroup. In DDV-LDV plants, the predominant LD Chi a biosynthetic routes appear to be the DV Chi a biosynthetic route and/or a mixed DV-MV Chi a biosynthetic route that bifurcates at the level of DV Chlide a. This greening group is designated as a light-dark DV (LDDV) subgroup. It is proposed that upon inhibiting the conversion of Pchlide a to Chi a by interruption of the L phase of the photoperiod by a brief period of D, the rates of DV and MV Pchlide a regeneration may reflect the carryover rates of DV and MV Pchlide a biosynthesis in L instead of reflecting a differential use of DV and MV carboxylic biosynthetic rates in D. It is also shown that in LDMV plants, MV Chlide a and MV Chi a are formed without the participation of [4-vinyl] Chlide a reductase. On the basis of recently published evidence, it is also argued that Pchlide oxidoreductase-A (POR-A) may be active in LDDV plants, while POR-B may predominate in LDMV plant species. The evolutionary significance of the LDDV and LDMV greening subgroups is discussed.     

Radon gas activity measurements in the frame of an international comparison

In order to validate its original method for the radon gas activity standardization and to assure the international metrological traceability and equivalence, the Radionuclide Metrology Laboratory of IFIN-HH participated recently in the international comparison CCRI(II)-K2.Rn-222, organized by the International Committee for Weights and Measures—CIPM-CCRI(II)-Radionuclide Measurements. The radon gas sample received, the measurement equipment and the experimental procedures are described. Because the comparison is underway, the results are presented only as relative values to the liquid scintillator vial measurement result. The uncertainty budget of the measurements performed is provided.     

Superacid cyclization of esters of some bishomoisoprenoid acids

It is shown that on the superacid cyclization of esters of bishomobicyclogeranylgeranic and E,E-bishomofarnesic acids fully cyclized hydroxyesters are formed in good yield, while on the interaction of esters of 6-hydroxy- and 6-acyloxy-15-bishomobicyclogeranylgeranic acids with a superacid no carbocyclization takes place.     

ICP-MS Assessment of Essential and Toxic Trace Elements in Foodstuffs with Different Geographic Origins Available in Romanian Supermarkets

The present study was conducted to quantify the daily intake and target hazard quotient of four essential elements, namely, chromium, cobalt, nickel, and copper, and four toxic trace elements, mercury, cadmium, lead, and arsenic. Thirty food items were assigned to five food categories (seeds, leaves, powders, beans, and fruits) and analyzed using inductively coupled plasma-mass spectrometry. Factor analysis after principal component extraction revealed common metal patterns in all foodstuffs, and using hierarchical cluster analysis, an association map was created to illustrate their similarity. The results indicate that the internationally recommended dietary allowance was exceeded for Cu and Cr in 27 and 29 foodstuffs, respectively. According to the tolerable upper level for Ni and Cu, everyday consumption of these elements through repeated consumption of seeds (fennel, opium poppy, and cannabis) and fruits (almond) can have adverse health effects. Moreover, a robust correlation between Cu and As (p < 0.001) was established when all samples were analyzed. Principal component analysis (PCA) demonstrated an association between Pb, As, Co, and Ni in one group and Cr, Cu, Hg, and Cd in a second group, comprising 56.85% of the total variance. For all elements investigated, the cancer risk index was within safe limits, highlighting that lifetime consumption does not increase the risk of carcinogens.