Data-driven robust optimization

Mathematical Programming - The last decade witnessed an explosion in the availability of data for operations research applications. Motivated by this growing availability, we propose a novel schema...     

Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces

ABSTRACT

The present paper reports the experimental investigation of pool boiling heat transfer on multiscale functionalized copper surfaces. Multiscale functionalized surfaces are fabricated by employing the nano-second laser surface process (NLSP) technique. The heat transfer coefficients (HTCs) of functionalized surfaces are estimated experimentally by using water and acetone as pool liquid. Tests are performed at atmospheric pressure, and saturated pool boiling condition with heat flux varyies between 0 and 330 kW/m². The maximum HTCs for functionalized surface and reference polished surface were found to be 41,500 W/m²K and 23,000 W/m²K, respectively, with water and 22,000 W/m²K and 14,000 W/m²K, respectively, with acetone.     

On the spectroscopic examination of printed documents by using a field emission scanning electron microscope with energy-dispersive X-ray spectroscopy (FE-SEM-EDS) and chemometric methods: application in forensic science

Analytical and Bioanalytical Chemistry - The detection of computer-generated document forgeries has always been a challenging task for forensic document examiners (FDE). With the aim to support the...     

Experimental and theoretical assessment of Fe-doped indium-oxide-based dilute magnetic semiconductors

Specimens of iron-doped indium oxide (In_1-xFe_x)₂O₃ with x?=?0.015, 0.03, 0.045 and 0.06, amalgamated through a traditional solid-state reaction method followed by H₂/air sintering, were characterised using an X-ray diffractometer (XRD), a vibrating sample magnetometer (VSM), and a scanning electron microscope (SEM) to investigate their structural, magnetic and morphological properties respectively. According to XRD plots, all the specimens exhibit cubic bixbyite structures along with ancillary phases. Magnetic assessment showed that In₂O₃ has a negative susceptibility, exhibiting diamagnetic behaviour at room temperature. The doping of Fe ions induces ferromagnetic (FM) ordering, which is enhanced with increasing doping content. The strength of the magnetisation increases when the specimens are exposed to H₂ but is reduced on further air sintering. A bound magnetic polaron (BMP) model is successfully fitted to the observed FM data involving localised carriers and magnetic cations. A multivariate assessment viz. a hierarchical cluster analysis (HCA) was used to corroborate and strengthen the experimental determined magnetic properties. A homogeneous particle distribution was observed in all SEM micrographs and is validated through MATLAB-based simulation by applying a watershed segmentation algorithm. Surface plots also confirm the change in magnetic properties with increase in doping concentration.     

An O-Acetylserine (thiol) Lyase from Leucaena leucocephala Is a Cysteine Synthase But Not a Mimosine Synthase

In plants, the final step of cysteine formation is catalyzed by O-acetylserine (thiol) lyase (OAS-TL). The purpose of this study was to isolate and characterize an OAS-TL from the tree legume Leucaena leucocephala (leucaena). Leucaena contains a toxic, nonprotein amino acid, mimosine, which is also formed by an OAS-TL, and characterization of this enzyme is essential for developing a mimosine-free leucaena for its use as a protein-rich fodder. The cDNA for a cytosolic leucaena OAS-TL isoform was obtained through interspecies suppression subtractive hybridization. A 40-kDa recombinant protein was purified from Escherichia coli and used in enzyme activity assays where it was found to synthesize only cysteine. The enzyme followed Michaelis-Menten kinetics, and the K _m was calculated to be 1,850?±?414 μM sulfide and the V _max was 200.6?±?19.92 μM cysteine min^?1. The N-terminal affinity His-tag was cleaved from the recombinant OAS-TL to eliminate its possible interference in binding with the substrate, 3-hydroxy-4-pyridone, for mimosine formation. The His-tag-cleaved OAS-TL was again observed to catalyze the formation of cysteine but not mimosine. Thus, the cytosolic OAS-TL from leucaena used in this study is specific for only cysteine synthesis and is different from previously reported OAS-TLs that also function as β-substituted alanine synthases.     

NHC-Pd complex heterogenized on graphene oxide for cross-coupling reactions and supercapacitor applications

N-heterocyclic carbene (NHC)-palladium(II) complex (GO@NHC-Pd) was synthesized on graphene oxide (GO) support via a simple and cost-effective multistep approach. The spectroscopic, microscopic, thermal, and surface analyses of GO@NHC-Pd confirmed the successful formation of the catalyst. The investigation of catalytic activity showed that GO@NHC-Pd was very effective in Suzuki–Miyaura as well as Hiyama cross-coupling. Being heterogeneous in nature, GO@NHC-Pd was recovered after each reaction cycle easily and reused for up to nine and six cycles in Suzuki–Miyaura and Hiyama cross-coupling, respectively, without significant loss of activity. Further exploration of the supercapacitor performance of GO@NHC-Pd catalyst assembled in a two-electrode cell configuration shown a maximum attained capacitance of 105.26 F/g at a current density of 0.1 A/g with good cycling stability of 96.89% over 2,500 cycles.     

A novel bit permutation-based image encryption algorithm

Nonlinear Dynamics - In recent years, substantial work has been done for developing image encryption algorithms. Image encryption requires handling of large data, which needs computationally...     

Zeta potential and electroosmotic mobility in microfluidic devices fabricated from hydrophobic polymers: 2. Slip and interfacial water structure

We discuss the structure of water at hydrophobic interfaces from the standpoint of its impact on electrokinetic phenomena in microfluidic devices fabricated from hydrophobic polymers such as Teflon or Zeonor. Water structuring at hydrophobic interfaces has been described as a source of interfacial charge (see Part 1, this issue), and dewetting phenomena, whether via depletion layers or nanobubbles, contribute to slip and enhanced apparent electrokinetic potentials. Issues concerning the impact of hydrodynamic slip and the role of diffuse interfacial structures are discussed. These issues are coupled with each other and with interfacial charge concerns, providing challenges for measurements of individual parameters.     

Elastic Light Tunable Tissue Adhesive Dendrimers

Development of bioadhesive formulations for tissue fixation remains a challenge. The major drawbacks of available bioadhesives are low adhesion strength, toxic byproducts, and complexity of application onto affected tissues. In order to address these problems, this study has developed a hydrogel bioadhesive system based on poly amido amine (PAMAM) dendrimer, grafted (conjugated) with UV‐sensitive, 4‐[3‐(trifluoromethyl)‐3H‐diazirin‐3‐yl] benzyl bromide (PAMAM‐g‐diazirine). This particular diazirine molecule can be grafted to the surface amine groups of PAMAM in a one‐pot synthesis. Diazirine functionalities are carbene precursors that form covalent crosslinks with hydrated tissues after low‐power UV activation without necessity of free‐radical initiators. The rheological properties and adhesion strength to ex vivo tissues are highly controllable depending on diazirine grafting, hydrogel concentration, and UV dose intensity fitting variety types of tissues. Covalent bonds at the tissue/bioadhesive interface provide robust adhesive and mechanical strength in a highly hydrated environment. The free flowing hydrogel conversion to elastic adhesive after UV activation allows intimate contact with the ex vivo swine tissue surfaces with low in vitro cytotoxicity observed, making it a promising bioadhesive formulation toward clinical applications.