Sulfide determination in hydrothermal seawater samples using a vibrating gold micro-wire electrode in conjunction with stripping chronopotentiometry

A rapid electrochemical stripping chronopotentiometric procedure to determined sulfide in unaltered hydrothermal seawater samples is presented. Sulfide is deposited at −0.25 V (vs Ag/AgCl, KCl 3 M) at a vibrating gold microwire and then stripped through the application of a reductive constant current (typically −2 μA). The hydrodynamic conditions are modulated by vibration allowing a short deposition step, which is shown here to be necessary to minimize H₂S volatilization. The limit of detection (LOD) is 30 nM after a deposition step of 7 s. This LOD is in the same range as the most sensitive cathodic voltammetric technique using a mercury drop electrode and is well below those reported previously for other electrodes capable of being implemented in situ.     

Electrochemical Characterization of Stainless Steel as a New Electrode Material in a Medical Device for the Diagnosis of Sudomotor Dysfunction

An electrochemical sensor detects the risk of diabetes and prediabetes; low potentials are applied to nickel electrodes and electrical responses are measured. Although the contact of nickel with skin is short, the risk of allergical reactions cannot be discarded. SS 304L, with lower Ni content, was tested in carbonate buffer solutions containing chloride, lactate and urea to investigate its sensitivity to different parameters in sweat and compare it to nickel. The results show that SS 304L is a suitable material for the assessment of sudomotor dysfunction due to its high capacity to detect the deviation in Cl^? concentration. Sensitivity of SS 304L to Cl^? is much higher than for nickel.     

Rheological Behavior and Non-enzymatic Degradation of a Sulfated Galactan from Halymenia durvillei (Halymeniales, Rhodophyta)

The rheological behavior of a sulfated galactan extracted from Halymenia durvillei, a red seaweed collected in the coastal waters of a small island of Madagascar (Nosy-be in Indian Ocean), was investigated in dilute and semi-dilute solutions. In dilute solution with NaCl at 0.3?M, the polysaccharide adopted a coil conformation whereas, at higher concentrations, the polymer had the behavior of shear-thinning fluid, typical of polymer with high molar mass or semi-rigid conformation. Degradations of this lambda carrageenan-like, using radical depolymerization, and high-pressure homogenization led to several samples of various and controlled molar masses. The measure of their intrinsic viscosities permitted the determination of the relationship of Mark?CHouwink?CSakurada.     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Human serum albumin-mediated stereodifferentiation in the triplet state behavior of (S)- and (R)-carprofen

A remarkable stereodifferentiation has been observed in the interaction between the excited triplet state of carprofen (CP) and human serum albumin (HSA). Time-resolved measurements using laser flash photolysis reveal the presence of two components with different lifetimes in triplet decay. This is explained by complexation of CP to the two possible HSA binding sites. The shorter-lived components are ascribed to the CP/HSA complexes in site I, where stereodifferentiation is more important (tauR/tauS ca. 4). This is correlated with formation of a dehalogenated photoproduct upon steady-state photolysis.     

Pyrazolo[3,4-d][1,2,3]triazine DNA: synthesis and base pairing of 7-deaza-2,8-diaza-2'-deoxyadenosine

7-deaza-2,8-diaza-2'-deoxyadenosine (4) was synthesized from 8-aza-7-deaza-2'-deoxyadenosine (1) via the 1,N(6)-etheno derivative 5. Ring opening with sodium hydroxide followed by ring closure in the presence of sodium nitrite formed the tricyclic intermediate 5 from which the transiently introduced "etheno" moiety was removed with NBS. Compound 4 was converted to the phosphoramidite 11, which was employed in solid-phase oligonucleotide synthesis. Base pairing studies on 4, incorporated in a 12-mer duplex, showed that this adenine nucleoside analogue forms a strong base pair with dG but not with dT. This novel base pair is as stable as that of the canonical dA-dT pair. As a result of the absence of nitrogen-7 compound 4 is expected to form a face to face base pair with dG.     

2‐Amino‐8‐(2‐deoxy‐2‐fluoro‐β‐D‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one: Synthesis and Conformation of a 5‐Aza‐7‐deazaguanine Fluoronucleoside

Nucleobase‐anion glycosylation of 2‐[(2‐methyl‐1‐oxopropyl)amino]imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one ( 6 ) with 3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐α‐D ‐arabinofuranosyl bromide ( 8 ) furnishes a mixture of the benzoyl‐protected anomeric 2‐amino‐8‐(2‐deoxy‐2‐fluoro‐D ‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐ones 9 / 10 in a ratio of ca. 1 : 1. After deprotection, the inseparable anomeric mixture 3 / 4 was silylated. The obtained 5‐O‐[(1,1‐dimethylethyl)diphenylsilyl] derivatives 11 and 12 were separated and desilylated affording the nucleoside 3 and its α‐D anomer 4 . Similar to 2′‐deoxy‐2′‐fluoroarabinoguanosine, the conformation of the sugar moiety is shifted from S towards N by the fluoro substituent in arabino configuration.     

1,10‐Phenanthroline and Non‐Symmetrical 1,3,5‐Triazine Dipicolinamide‐Based Ligands For Group Actinide Extraction

The synthesis and evaluation of new extractants for spent nuclear fuel reprocessing are described. New bitopic ligands constituted of phenanthroline and 1,3,5‐triazine cores functionalized by picolinamide groups were designed. Synthetic routes were investigated and optimized to obtain twelve new polyaza‐heterocyclic ligands. In particular, an efficient and versatile methodology was developed to access non‐symmetric 2‐substituted‐4,6‐di(6‐picolin‐2‐yl)‐1,3,5‐triazines from the 1,3,5‐triazapentadiene precursor in the presence of anhydride reagents. Extraction studies showed the ability of both ligand series to extract and separate actinides selectively at different oxidation states (U^VI, Np^V,VI, Am^III, Cm^III, and Pu^IV) from an acidic solution (3 M HNO₃). Phenanthroline‐based ligands show the most promising efficiency for use in the group actinide extraction (GANEX) process due to a higher number of donor nitrogen atoms and a suitable pre‐organization of the dipicolinamide‐1,10‐phenanthroline architecture.     

Unraveling the Crystal Structure of Lanthanide–Murexide Complexes: Use of an Ancient Complexometry Indicator as a Near‐Infrared‐Emitting Single‐Ion Magnet

Herein, we provide some structural evidence of the complexation color‐change of murexide solutions in presence of lanthanide, which has been used for decades in complexometric studies. For Ln=Sm to Lu and Y, the compounds crystallize as monomeric [Ln(Murex)₃] ? 11 H₂O with an N3O6 tricapped square‐antiprism environment, which are stable up to 250 °C. Single‐ion magnet (SIM) behavior is then observed on the Yb^III derivative in an original nine‐coordinated environment. In‐field slow relaxation (Δ=(15.6±1) K; τ₀=2.73×10^?6 s) is observed with a very narrow distribution of the relaxation time (α_max=0.09). Magnetic and photophysical properties can be correlated. On one hand the analysis of NIR emission spectrum permits to have access to crystal field parameters and to compare them with those extracted from dc measurements. On the other hand, magnetic measurements permit to identify the nature of the M _J states involved in the ²F_5/2→²F_7/2 luminescence spectrum. The gap between the low‐lying states is in agreement with the energy barrier obtained from magnetic slow‐relaxation measurement.     

Thermo‐ and pH‐sensitive triblock copolymers with tunable hydrophilic/hydrophobic properties

Polymers consisting of poly(acrylic acid) (PAA) and statistical poly[(acrylic acid)‐co‐(tert‐butylacrylate)] (P(AA‐co‐tBA)), attached to both extremities of Jeffamine® (D series based on a poly(propylene oxide) (PPO) with one amine function at each end) using atom transfer radical polymerization (ATRP) are presented in this article. An original bifunctional amide‐based macroinitiator was first elaborated from Jeffamine®. tBA polymerization was subsequently initiated from this macroinitiator. This polymerization occurs in a well‐controlled manner leading to narrow molecular weights distribution. Amphiphilic copolymers were finally obtained after complete or partial hydrolysis of the PtBA blocks into PAA. The control of the partial hydrolysis of tBA units, conducted in a concentrated HCl/tetrahydrofuran mixture, is demonstrated. The properties of the triblock copolymers were preliminary investigated in aqueous solution by absorbance, DLS measurements and SEC/MALS/DV/DRI analysis as a function of temperature and pH modifications, providing evidences of thermo‐ and pH‐sensitive self‐assembly of the copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2606–2616