Thermo‐ and pH‐sensitive triblock copolymers with tunable hydrophilic/hydrophobic properties

Polymers consisting of poly(acrylic acid) (PAA) and statistical poly[(acrylic acid)‐co‐(tert‐butylacrylate)] (P(AA‐co‐tBA)), attached to both extremities of Jeffamine® (D series based on a poly(propylene oxide) (PPO) with one amine function at each end) using atom transfer radical polymerization (ATRP) are presented in this article. An original bifunctional amide‐based macroinitiator was first elaborated from Jeffamine®. tBA polymerization was subsequently initiated from this macroinitiator. This polymerization occurs in a well‐controlled manner leading to narrow molecular weights distribution. Amphiphilic copolymers were finally obtained after complete or partial hydrolysis of the PtBA blocks into PAA. The control of the partial hydrolysis of tBA units, conducted in a concentrated HCl/tetrahydrofuran mixture, is demonstrated. The properties of the triblock copolymers were preliminary investigated in aqueous solution by absorbance, DLS measurements and SEC/MALS/DV/DRI analysis as a function of temperature and pH modifications, providing evidences of thermo‐ and pH‐sensitive self‐assembly of the copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2606–2616     

Model study on steady heat capacity in driven stochastic systems

We explore two- and three-state Markov models driven out of thermal equilibrium by non-potential forces, to demonstrate basic properties of the steady heat capacity based on the concept of quasistatic excess heat. It is shown that large enough driving forces can make the steady heat capacity negative. For both the low- and high-temperature regimes we propose an approximative thermodynamic scheme in terms of “dynamically renormalized” effective energy levels.     

Multivariate control charts based on NAS and mid‐infrared spectroscopy for quality control of B5 blends of methyl soybean biodiesel in diesel

In this work, mid‐infrared spectroscopy and multivariate control charts based on net analyte signal were applied for quality control of B5 blends of biodiesel/diesel (5% biodiesel/95% diesel). Control charts were constructed using instrumental signal decomposition, generating three charts: the net analyte signal chart for monitoring the analyte of interest (methyl soybean biodiesel); the interference chart, which corresponds to the contribution of all other compounds in the diesel sample (diesel); and the residual chart, which corresponds to non‐systematic variations. Statistical limits were established for each developed chart, using samples inside quality specifications (normal operation conditions). To validate multivariate control charts, new samples were analyzed. The new samples represented samples in‐control and samples out‐of‐control in relation to the content of biodiesel, adulterated biodiesel with severe vegetable oils and adulterated diesel with residual automotive lubricant oil, kerosene, and gasoline. The results obtained show an excellent distinction between the samples inside and out of the quality specifications, with 91% and 100% correctly classified, respectively, which demonstrates that the methodology developed is a viable alternative for quality monitoring of this type of fuel. Copyright © 2015 John Wiley & Sons, Ltd.     

Developments of Asymmetric Synthesis Mediated by Chiral Sulfur Reagents

Abstract

Our work on the thio-Claisen rearrangement mediated by an adjacent sulfinyl group is reviewed. The substrates could easily be prepared on a large scale from diacetone-D-glucose. The rearrangement was effected with a diastereoselectivity of 95:5, in favor of the (S,S) or the (R,R) isomer. An approach to natural bis(lactones) was investigated, using a halolactonization reaction and a second [3,3] sigmatropic shift, again mediated by the sulfinyl group. The second part deals with the catalytic enantioselective benzylidenation of aldehydes, mediated by chiral sulfur ylides. We have introduced simple C ₂ symmetric thiolanes for that purpose. The procedure is very practical and enantiomeric excesses up to 96% have been reported for the model of stilbene oxide. A series of ferrocenyl sulfides with planar chirality has also been investigated, leading to unexpected diastereoselectivities and enantiomeric excesses up to 94%.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Voltammetry coupled to mass spectrometry in the presence of isotope O labeled water for the prediction of oxidative transformation pathways of activated aromatic ethers: Acebutolol

The coupling between an electrochemical cell (EC) and a mass spectrometer (MS) is a useful screening tool (EC-MS) to study the oxidative transformation pathways of various electroactive species. For that purpose, we showed that the EC-MS method, carried out in the presence and absence of isotope ¹⁸O labeled water leads not only to a fast identification of oxidation products but also leads to a fast elucidation of the mechanism pathway reaction. We examined herein the case of the electrochemical hydrolysis of activated aromatic ether. Acebutolol (β-blockers) was selected herein as model of activated aromatic ether, and its electrochemical oxidation was examined in both the presence and absence of isotope ¹⁸O labeled water. To elucidate electrochemical hydrolysis pathway reaction: O-dealkylation or O-dealkoxylation, our approach was used to prove its applicability. The electrochemical oxidation mechanism was then elucidated showing an O-dealkoxylation reaction. In addition, density functional theory (DFT) calculations fully support the experimental conclusions.     

Low‐Level Laser Therapy Restores the Oxidative Stress Balance in Acute Lung Injury Induced by Gut Ischemia and Reperfusion

It remains unknown if the oxidative stress can be regulated by low‐level laser therapy (LLLT) in lung inflammation induced by intestinal reperfusion (i‐I/R). A study was developed in which rats were irradiated (660 nm, 30 mW, 5.4 J) on the skin over the bronchus and euthanized 2 h after the initial of intestinal reperfusion. Lung edema and bronchoalveolar lavage fluid neutrophils were measured by the Evans blue extravasation and myeloperoxidase (MPO) activity respectively. Lung histology was used for analyzing the injury score. Reactive oxygen species (ROS) was measured by fluorescence. Both expression intercellular adhesion molecule 1 (ICAM‐1) and peroxisome proliferator‐activated receptor‐y (PPARy) were measured by RT‐PCR. The lung immunohistochemical localization of ICAM‐1 was visualized as a brown stain. Both lung HSP70 and glutathione protein were evaluated by ELISA. LLLT reduced neatly the edema, neutrophils influx, MPO activity and ICAM‐1 mRNA expression. LLLT also reduced the ROS formation and oppositely increased GSH concentration in lung from i‐I/R groups. Both HSP70 and PPARy expression also were elevated after laser irradiation. Results indicate that laser effect in attenuating the acute lung inflammation is driven to restore the balance between the pro‐ and antioxidants mediators rising of PPARy expression and consequently the HSP70 production.     

Temperature dependence of the director reorientation of dye-doped nematic liquid crystals subjected to an optical field and its relation with the non-linear absorption coefficient

The temperature behaviour of the torque amplification factor η in the E48-D4 dye-host/liquid crystal-guest dyed system illuminated by a laser beam has been investigated using a single beam Z-Scan experimental technique. A plot of η versus temperature showed a monotonic aspect, different from other anthraquinone dyed liquid crystals. This behaviour, in our case, is consistent with the monotonic dependence on temperature of the linear α_o and non-linear β optical absorption coefficients. In particular, the non-linear optical absorption coefficient related to the reorienting process is negative and of the order of-0.25 mm W^-1. The temperature dependence of η seems to be directly correlated to β and not to α_o. Since drastic conformational modifications on dye molecules are not expected on passing from the ground to the excited state, the role of the electronic structure seems to be dominant in the reorienting process in dyed nematics.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.