Electrochromatography in the separation of ions: Separation of alkaline earth metals

Complete Separation of ternary mixtures of Ca, Mg and Sr or Ba ions with ammonium chloride and less complete but detectable separation of the same mixtures with ammonium nitrate have been achieved, as well as a few binary separations of the type Ca-Ba, Ca-Sr, Ca-Mg, Mg-Sr and Mg-Ba.     

Compatibility studies on polyblends of PVC with chlororubber-20 and its graft polyblends by ultrasonics

Compatibilities of various PVC blends with chlororubber-20 and its graft polyblends have been studied on the basis of our previous findings. It has been found that chlororubber-20 makes compatible blends with PVC, while grafting of styrene, ethyl acrylate or acrylonitrile onto chlororubber-20 generates heterogeneity in their blends with PVC. The behaviour of these blends at the molecular level is reflected in the changes of ultrasonic velocity and absolute viscosity with composition.     

High surface area silicon carbide from rice husk: A support material for catalysts

Ultrafine -SiC with high surface area (150 m² g^–1) has been synthesized by inflight processing of charred rice husk in a r.f. plasma reactor operating at atmospheric pressure. The plasma-synthesized particles were doped with platinum (1%) and tested as a catalytic support material. The catalyst (1% Pt doped -SiC) showed 100% conversion of CO to CO₂ at a temperature as low as 175°C.     

Thermodynamics of molecular interactions in binary mixtures of non-electrolytes. Molar excess volumes

Molar excess volumes, V^E, for pyridine (A) + α-picoline (B), + β-picoline (B) and + γ-picoline (B) and benzene (A) + toluene (B), + o-xylene (B) and + p-xylene (B) and carbon tetrachloride (A) + n-heptane (B) have been measured dilatometrically as a function of temperature and composition and have been utilized to study B—B and B—B—B interactions in the presence of A via the Mayer—McMillan approach. A model has also been presented to account for these B—B and B—B—B interactions. The V^E data at 308.15 K have also been analysed in terms of the “graph theoretical” approach which describes the V^E data well for all these mixtures at 308.15 K. The “graph theoretical” approach has further been extended to successfully evaluate V^E data for a mixture at any temperature, T₂, when the V^E data at T₁ are known.     

Mössbauer effect of ferrous zirconium double sulphate

The Mössbauer spectrum of ferrous zirconium double sulphate FeZrO(SO₄)₂·8H₂O shows a quadrupole split doublet at room temperature. The results are discussed in terms of high-spin Fe(II) in distorted octahedral symmetry.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

Complexometric estimation of copper

Summary Copper(II) or Copper(II) and iron(III) in a mixture are determined by titration with EDTA (disodium salt) solution as complexometric reagent at p_H 4.0 using potassium thiocyanate-p-anisidine as an indicator.Fe^III is estimated in the mixture by titration with EDTA (disodium salt) solution using potassium thiocyanate-ether as an indicator.Cu^II present in the mixture is, therefore, equivalent to the difference in amounts of the EDTA (disodium salt) used for the two sets of titrations of the mixture using potassium thiocyanate-p-anisidine and potassium thiocyanate-ether as indicators respectively.Strontium, magnesium, manganese, calcium, barium and mercuric ions do not interfere in these estimations.

---

Zusammenfassung Kupfer(II) oder Kupfer(II) und Eisen(III) zusammen werden komplexometrisch mit ÄDTA-Lösung bei p_H 4,0 unter Verwendung von Kaliumthiocyanat-p-Anisidin als Indicator titriert. Eisen(III) wird in dem Gemisch durch komplexometrische Titration gegen Kaliumthiocyanat-Äther als Indicator bestimmt. Der Kupfer(II)-gehalt ergibt sich aus der Differenz der beiden Titrationen. Strontium, Magnesium, Mangan, Calcium, Barium und Quecksilber(II) stören nicht.

     

Reduction of Z-2-chlorostilbene with lithium aluminum hydride: evidence for an electron transfer radical mechanism

$\text{Z}$-2-Chlorostilbene undergoes uncatalyzed LiAlH₄ reduction giving phenanthrene and $\text{Z}$-stilbene. An electron transfer radical mechanism is proposed. LiAlH₄ induced isomerization of $\text{Z}$-stilbene produces $\text{E}$-stilbene.     

Chromatographic study of anionic complexes

Summary In this paper we have reported our results on the attempted separation of copper(II), nickel(II), cobalt(II) and iron(III) in mixtures by filter paper strip chromatography, using aqueous ethanol as solvent. The effect of the presence of varying concentrations of citrate ion as a complexing agent in the mixtures has been studied. The complexing agent has been added in the metal solution, and not in the solvent as usually done by previous workers.     

Fourth-derivative spectrophotometric determination of fungicide ferbam (iron(III) dimethyldithiocarbamate) in a commercial sample and wheat grains using 2,2′-bipyridyl

A procedure has been developed for the direct fourth-derivative spectrophotometric determination of iron(III) dimethyldithiocarbamate by converting it into an iron(II) 2,2'-bipyridyl complex, which is then dissolved in Triton X-100. Beer's law is obeyed over the concentration range 0.5-20 microg mL(-1 )in the final solution. Various parameters such as the effect of pH and interference of large number of ions on the determination of ferbam have been studied in detail. The method is sensitive, highly selective and can be used for the determination of ferbam in a commercial sample and in mixtures with various dithiocarbamates (ziram, zineb, maneb, etc.) and from wheat grains.