Analysis of Corrugated Long-Period Gratings in Planar Waveguides and Their Polarization Dependence

We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.     

Synthesis, structural and electrical properties of La and Nb modified Bi4Ti3O12 ferroelectric ceramics

Polycrystalline ceramic samples of Bi_4−xLa_xTi₃O₁₂ (x=0.0, 0.5 and 1) and Bi_3.5La_0.5Ti_3−yNb_yO₁₂ (y=0.02 and 0.04) have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on Bi-site and Nb doping on Ti-site on the structural and electrical properties of Bi₄Ti₃O₁₂ powders was investigated by X-ray diffraction, scanning electron microscopy, dc conductivity and dielectric studies. A better agreement between the observed and calculated X-ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non-centrosymmetric space group Fmmm in all the cases. A better agreement between observed and calculated d-values also shows that the lattice parameters calculated using the Rietveld refinement analysis are better. The increase in lanthanum and niobium contents does not lead to any secondary phases. It is found that La³⁺ doping reduces the material grain size and changes its morphology from the plate-like form to a spherical staking like form. The substitution of Nb for Ti ions affected the degree of disorder and modified the dielectric properties leading to more resistive ceramic compounds. The shape and size of the grains are strongly influenced by the addition of niobium to the system. The activation energies of all the compounds were calculated by measuring their dc electrical conductivities. The frequency and temperature dependent dielectric behavior of all the compounds have also been studied and the results are discussed in detail. The substitution of La and Nb on the Bi and Ti sites decreased the T_c and improved the dielectric and ferroelectric behavior.     

Electrical characterization of strontium tartrate single crystals

The a.c. and d.c. conductivity of SrC₄H₄O₆·3H₂O are measured and are found to lie between usual conductivities of semiconductor and insulator. Temperature dependence of d.c. conductivity shows intrinsic conduction, which is confirmed by the slope of versus data. Due to application of thermal energy, noticeable conductivity peaks imply liberation of water molecules during dehydration and the formation of strontium oxalate. The conductivity plot has a nature similar to the intrinsic-to-extrinsic transition found in normal semiconductors. There occurs Efros hopping conduction in our samples.     

Absence of morphotropic phase boundary effects in BiFeO<Subscript>3</Subscript>–PbTiO<Subscript>3</Subscript> thin films grown via a chemical multilayer deposition method

We report an unusual behavior observed in (BiFeO₃)_1−x –(PbTiO₃) _x (BF–xPT) thin films prepared using a multilayer chemical solution deposition method. Films of different compositions were grown by depositing several bilayers of BF and PT precursors of varying BF and PT layer thicknesses followed by heat treatment in air. X-ray diffraction showed that samples of all compositions show mixing of two compounds resulting in a single-phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk compositions, samples show a monoclinic (M_A-type) structure suggesting disappearance of the morphotropic phase boundary (MPB) at x=0.30 as observed in the bulk. This is accompanied by the lack of any enhancement of the remanent polarization at the MPB, as shown by the ferroelectric measurements. Magnetic measurements showed an increase in the magnetization of the samples with increasing BF content. Significant magnetization in the samples indicates melting of spin spirals in the BF–xPT films, arising from a random distribution of iron atoms. Absence of Fe²⁺ ions was corroborated by X-ray photoelectron spectroscopy measurements. The results illustrate that thin film processing methodology significantly changes the structural evolution, in contrast to predictions from the equilibrium phase diagram, besides modifying the functional characteristics of the BP-xPT system dramatically.     

On the Supposed Isoindole Synthesis from o-Tolunitrile

A recent communication¹ in this journal reported the reaction of o-tolunitrile with sodium in tetrahydrofuran to yield a compound, m.p. 123.5–124°, to which was assigned the isoindole structure 1. A plausible mechanism can be written for the formation of 1 involving reductive dimerization of the cyano groups of two molecules of the nitrile, subsequent 1,5-hydrogen shift from a methyl group, disrotatory electrocyclic isoindole ring closure, and finally air oxidation and tautomerization to 1. Nevertheless, the evidence presented did not require an isoindole structure. Moreover, it would be unusual for a primary enamine to survive.     

Controlled Annealing in Adaptive Multicomponent Gels

We use a pH-driven annealing process to convert between co-assembled and self-sorted networks in multicomponent gels. The initially formed gels at low pH are co-assembled, with the two components coexisting within the same self-assembled structures. We use an enzymatic approach to increase the pH, resulting in a gel-to-sol transition, followed by a hydrolysis to lower the pH once again. As the pH decreases, a self-sorted network is formed by a two-stage gelation process determined by the pK_a of each component. This approach can be expanded to layered systems to generate many varied systems by changing composition and rates of pH change, adapting their microstructure and so allowing access to a far greater range of morphologies and complexity than can be achieved in single component systems.     

Tris(2,2'-bipyridyl)ruthenium(II) chemiluminescence enhanced by silver nanoparticles

Mixtures of silver(I) and citrate that are used to produce silver nanoparticles evoke intense chemiluminescence with tris(2,2'-bipyridyl)ruthenium(II) and cerium(IV), which can be exploited for the determination of citrate ions and other analytes over a wide concentration range.     

Porous organic cage nanocrystals by solution mixing

We present here a simple method for the bottom-up fabrication of microporous organic particles with surface areas in the range 500-1000 m(2) g(-1). The method involves chiral recognition between prefabricated, intrinsically porous organic cage molecules that precipitate spontaneously upon mixing in solution. Fine control over particle size from 50 nm to 1 μm can be achieved by varying the mixing temperature or the rate of mixing. No surfactants or templates are required, and the resulting organic dispersions are stable for months. In this method, the covalent synthesis of the cage modules can be separated from their solution processing into particles because the modules can be dissolved in common solvents. This allows a "mix and match" approach to porous organic particles. The marked solubility change that occurs upon mixing cages with opposite chirality is rationalized by density functional theory calculations that suggest favorable intermolecular interactions for heterochiral cage pairings. The important contribution of molecular disorder to porosity and surface area is highlighted. In one case, a purposefully amorphized sample has more than twice the surface area of its crystalline analogue.     

Green synthesis and characterization of silver nanoparticles by Allium cepa L. to produce silver nano‐coated fabric and their antimicrobial evaluation

This research work was proposed to study the antimicrobial activity of the silver nanocoated fabric with the purpose of producing good dressing and clothing material. We synthesized simple, ecofriendly, cost‐effective and sustainable silver nanoparticles by using the aqueous extract of Allium cepa L. Here, A. cepa L. acts as a good reducing and capping agent that produced stable silver nanoparticles having particle size of range 36 ± 1 to 98 ± 2 nm, Poly dispersiblity index 0.234 ± 0.61 to 1.023 ± 0.33 and Zeta potential ‐12 ± 1.5 mV to ‐26 ± 1.2 mV. The effect of temperature and extract volume used was considered for optimization of synthetic procedure. The nanocoated fabric was characterized for morphological study, size (using transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE‐SEM) and zeta‐potential (Zeta Potentiometer). The presence of functional groups were observed by using attenuated total reflection‐Fourier transform infrared (ATR‐FTIR) and Raman spectroscopy. The crystallinity and structural property of the synthesized silver nanoparticles were studied in terms of Powder X‐ray diffraction (PXRD). An IC₅₀ value and zone of inhibition was studied which demonstrate that the silver nanocoated fabric have an excellent antibacterial property against Gram‐negative (Escherichia coli) and Gram‐positive (Staphylococcus aureus) bacteria. Further nanocoated fabric material was washed (with function of time 0, 10, 25, and 50 laundry cycles) and still retained their anti‐bacterial activity towards both strain. Initially there was 52 μg/ml of silver nanoparticles on the cotton fabric but after 50 laundry cycle in 500 ml of distilled water the fabric showed 92% efficiency against gram positive and 90% efficacy toward gram negative bacteria. It was found that 4.16 μg/ml nano particles leached in case of S. Aureus and 5.2 μg/mL silver nanoparticles leached in case of E. coli. Nanocoated fabric material synthesized using green synthesis was found to be economical with good resistance to washing.     

Pyridopyrimidines. X. Synthesis of 3‐Substituted 2‐Thioxo‐5,7‐dimethylpyrido[2,3‐d] pyrimidin‐4(3H)‐ones and their S‐Alkylation Under Phase Transfer Conditions

2‐Thioxo‐5,7‐dimethylpyrido[2,3‐d]pyrimidin‐4(3H)‐ones 3 were synthesized by the cyclocondensation of 2‐amino‐3‐carbethoxy‐4,6‐dimethylpyridine 1 with methyl‐N‐aryldithiocarbamates 2 and compared with the condensation between 1 and aryl isothiocyanates 4. When a comparative study of N vs S alkylation of ambident 2‐thioxo‐5,7‐dimethylpyrido[2,3‐d]pyrimidin‐4(3H)‐ones 3 was carried out under liquid‐liquid and solid‐liquid phase transfer conditions using various alkylating agents 5 , the S‐alkylated products 6 were obtained exclusively and selectively.