Stability-Indicating LC Method for Analysis of Lornoxicam in the Dosage Form

A simple, rapid, and precise method has been developed for quantitative analysis of lornoxicam (Lxm) in pharmaceutical dosage forms. Chromatographic separation of Lxm and its degradation products was achieved on a C₁₈ analytical column with 0.05% (v/v) aqueous trifluoroacetic acid–acetonitrile, 70:30 (v/v), as mobile phase. The flow rate was 1.0 mL min^?1, the column temperature 30 °C, and detection was by absorption at 295 nm using a photodiode-array detector. The number of theoretical plates and tailing factor for Lxm were 6,577 and 1.03, respectively. Lxm was exposed to thermal, photolytic, hydrolytic, and oxidative stress, and the stressed samples were analysed by use of the proposed method. Peak homogeneity data for Lxm in the chromatograms from the stressed samples, obtained by use of the photodiode-array detector, demonstrated the specificity of the method for analysis of Lxm in the presence of the degradation products. The linearity of the method was excellent over the range 10–200 μg mL^?1 Lxm. The correlation coefficient was 0.9999. Relative standard deviations of peak areas from six measurements were always less than 2%. The proposed method was found to be suitable and accurate for quantitative analysis of Lxm and study of its stability.     

Twisted non-Abelian determinants on Riemann supersurfaces

We calculate the twisted supersymmetric determinants that are necessary for the study of the propagation of spinning strings on arbitrary orbifolds. We calculate the degeneration behaviour of multiloop amplitudes for twisted internal sectors. We use this to derive the spectrum of dimensions of twist fields.On leave of absence from Department of Physics, Princeton University, Princeton, New Jersey 08544, USA     

Strategic innovations for the synthesis of vinigrol

Since the isolation of unique tricyclic diterpenoid vinigrol, its promising biological activities and complex framework have resulted in numerous synthetic efforts to the total synthesis of this venerable molecule for the past two and half decades. This mini review highlights the significance of various synthetic strategies towards this structurally unique and challenging natural product.     

Technical and economic evaluation of different reactors for methanotrophic cultures for propylene oxide production

A two-stage process for the manufacture of propylene oxide is described. The preliminary economics based on use of methanol as a regeneration factor has resulted in a production cost of $12.10/lb of propylene oxide based on propylene oxide production rate of 40 mg/g-cell/h in conventional reactor. Increasing the propylene oxide production from 40 to 500 mg/g-cell/h resulted in a cost reduction from $12.10 to 5.8/lb of propylene oxide. The granular-activated, carbon-fluidized bed reactor (GAC-FBR) absorbs the propylene oxide and when saturated is eluted with ethyl acetate, and the bed is regenerated by steam to drive off the residual solvents. The estimated manufacturing costs are approx 59% lower (from $12.10/lb in conventional reactors to $5.00/lb for GAC-FBRs) for products that are highly inhibitory such as epoxides. In the GAC-FBR reactor, enhancing the propylene oxide production rate from 120 to 1500 mg/g-cell/h has resulted in the cost reduction to $2.00/lb. Enhancing the production capacity from 1 million lb to 10 million lb/yr has further reduced the cost of production to $1.00/lb.     

Effects of physical aging,crystallinity, and orientation on the enzymatic degradation of poly(lactic acid)

The effects of physical aging, degree of crystallinity, and orientation of poly(lactic acid) (PLA) were studied using differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS). The samples of PLA with 96% [L] and 4% [D] contents were prepared by injection molding. The physical aging of PLA strongly depended on time and temperature. The change of rate of physical aging was very fast initially and slowed down as time increased. The enzymatic degradation of PLA was carried out with proteinase K at 37°C at a pH value of 8.6 in a Tris/HCl buffer solution. The enzymatic degradation rate was found to decrease as a function of physical aging (i.e., excess enthalpy relaxation). The rate of enzymatic degradation of PLA decreased with the increase in crystallinity. A threshold was observed when the heat of fusion was less than 20 J/g. The weight loss of PLA with a low level of crystallinity had no apparent change during any period of testing time. The rates of enzymatic degradation of stretched and injection-molded specimens were comparable. © 1996 John Wiley & Sons, Inc.     

Chiral separation and thermodynamic investigation of WCK 3023: A novel oxazolidinone antibacterial agent,application to pre‐clinical pharmacokinetic study

A chiral liquid chromatographic method was developed and validated for the quantification of R‐enantiomer impurity (RE) in WCK 3023 (S‐enantiomer), a new drug substance. The separation was achieved on Chiralpak IA (amylose‐based immobilized chiral stationary phase), using a mobile phase consisting of n‐hexane–ethanol–trifluoroacetic acid (70:30:0.2, v/v/v) at a flow rate of 1.0 mL/min. The method was extensively validated for the quantification of RE in WCK 3023 and proved to be robust. For RE the detector response was linear over the concentration range of 0.11–5 μg/mL. The limit of quantitation and limit of detection for RE were 0.11 and 0.04 μg/mL respectively. Average recovery of the RE was in the range of 98.11–99.55%. The developed method was specific, sensitive, precise and accurate for quantitative determination of RE in WCK 3023. The impact of thermodynamic parameters on the chiral separation was evaluated. The method was employed for controlling the enantiomeric impurity in the lots of WCK 3023 used for pre‐clinical studies. The method was successfully applied to evaluate the possible conversion of WCK 3023 to RE in rat serum samples during pre‐clinical pharmacokinetic studies.     

Dual-Core Leaky Waveguide-Based Filters for Erbium-Doped Waveguide Amplifier

Abstract

This article gives the design of a gain-flattening filter for an erbium-doped waveguide amplifier using a dual-core resonant leaky waveguide. The spectral variation of leakage loss of the waveguide has been used for gain equalization of the erbium-doped waveguide amplifier in the conventional (C) band. Leakage loss of the structure has been calculated by using the transfer matrix method. Numerical simulation results show a 17.5-dB gain with a gain excursion of ±1.35 dB in the C-band (1,526 nm–1,566 nm) of a typical erbium-doped waveguide amplifier. The study should be useful in designing integrated optic gain-flattening filters.     

A new paradigm for signal processing of Raman spectra using a smoothing free algorithm: Coupling continuous wavelet transform with signal removal method

Noise removal is considered a primary and inevitable step for background correction in experimentally obtained Raman spectra. Employing an appropriate algorithm for a smoothing‐free background correction technique not only increases the speed but also eliminates unwanted errors from the smoothing algorithms. Herein, we show a new smoothing‐free method for background correction, which we developed by merging continuous wavelet transform and signal removal method, which in combination, could be applied to noisy signals without smoothing. We used wavelet transformation for suppressing the side effects of noise and eliminating peaks from the spectrum, thereby providing spectral sections purely related to the background to be used in the background correction process. We applied a range of statistical analyses to test the performance of this algorithm, wherein a low deviation in background correction procedure was observed. Additionally, when we tested this algorithm for experimentally obtained real Raman spectra, it showed good capability to correct background of noisy signals without the requirement of a smoothing process. Copyright © 2013 John Wiley & Sons, Ltd.