Introduction of heteroatom-based substituents into 1,4-dihydropyridines by means of a halogen-mediated, oxidative protocol: diamination, sulfonylation, sulfinylation, bis-sulfanylation, and halo-phosphonylation processes

The natural tendency of 1,4-dihydropyridines to undergo "biomimetic" oxidation to afford pyridinium salts can be switched off and, through the use of reagents that interact electrophilically with the enamine moiety present in the heterocyclic system, it is possible to promote alternative oxidations. In this way, efficient regio- and stereocontrolled synthetic methods have been developed that lead to diversely substituted di- and tetrahydropyridines. These include iodoazidation, diamination, bis-sulfonamidation, sulfonylation, sulfinylation, thiocyanation, sulfanylation, bis-sulfanylation, and halo-phosphonylation processes.     

Depolymerization and chemical modification of lignite coal byPseudomonas cepacia strain DLC-07

Applied Biochemistry and Biotechnology - Coal metabolizingPseudomonas cepacia DLC-07 was isolated from soil and shown to use soluble lignite coal as a carbon/energy source.Pseudomonas modified coal...     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Study of the reaction of chalcone analogs of dehydroacetic acid and o-aminothiophenol: synthesis and structure of 1,5-benzothiazepines and 1,4-benzothiazines

Treatment of α,β-unsaturated carbonyl compounds, obtained by the reaction of DHA and aromatic (or heteroaromatic) aldehydes, with o-aminothiophenol results in the formation of 1,5-benzothiazepines and/or 1,4-benzothiazines depending upon the reaction conditions and structure of the aldehydes. The products were characterized by the combined use of multinuclear 1D and 2D NMR and GIAO/DFT calculations of ¹H, ¹³C and ¹⁵N chemical shifts. The tautomerism of these compounds in solution was determined, they have an exocyclic CC double bond.     

The effect of vibrational bond stretching on rotational inelastic electron-molecule scattering

Differential cross sections for state-to-state rotationally inelastic electron-Na₂ scattering, with the molecule being in the vibrational levelv′'=31, are measured at a collision energy of 150 eV. Angular momentum transfer of up to Δj=26 is observed, which is even more than previously obtained for the vibrational ground statev′'=0. Good agreement is found with theoretical results from a spectator scattering model. This work, in general, elucidates the role of vibrational excitation in collision dynamics under vibrationally sudden conditions.     

Structural features of some small carbonyls in the 1,3nπ states: An mcscf study

Structural features of a series of tetraatomic carbonyls in the ^1,3nπ* states are studied by using a recently proposed MCSCF algorithm at the INDO/2 level. The computed geometrical parameters and the inversion barrier heights agree quite well with the available experimental or ab initio theoretical data. The calculated transition energies turn out to be somewhat lower than the experimental counterparts. The specific MCSCF algorithm used is found to have excellent convergence properties.     

Equilibrium studies of Mn(II), Mg(II), Ca(II), Sr(II) and Ba(II) withp-fluoro-,p-chloro-,p-bromo-,p-methyl-benzoylacetones and 1-(4-fluorophenyl)-1,3-pentanedione

The rawpH-data, obtained from the potentiometric titrations of the titled ligands with NaOH in 75% (v/v) dioxane-water mixture performed at 20, 30 and 40°C at constant ionic strength (=0.1M-NaClO₄), have been adequately corrected for dilution, and solvent effects in order to evaluate thermodynamic dissociation constants. Variance of the latter as a function of temperature has also been accounted for. The differing magnitudes of thermodynamic dissociation constants of the titled ligands have been explained on the basis of the non coplanar orientation of the phenyl ring in the ligands and a comparison has been made with those of unsubstituted benzoylacetone, dibenzoylmethane and acetylacetone.Following similar technique, thermodynamic stepwise and overall formation constants of the titled metal-ligand systems have been obtained and the results correlated with ligand basicity inverse metal crystal radii and second potentials of metals. Decrease in the free enthalpy (–G) of complexation reaction has also been evaluated.

---

Untersuchung der Gleichgewichte von Mn(II), Mg(II), Ca(II), Sr(II) und Ba(II) mit p-Fluor-, p.-Chlor-, p-Brom-, p-Methyl-benzoylaceton und 1-(4-Fluorphenyl)-1,3-pentanedion

Zusammenfassung Aus der potenitometrischen Titration der Titelverbindungen mit NaOH in 75 (v/v) Dioxan—Wasser bei, 20, 30 und 40°C bei konstanter Ionenstärke (=0,1M-NaClO₄) wurden die thermodynamischen Dissoziationskonstanten ermittelt. Verdünnungs-, Lösungsmittel-und Temperatureffekte wurden berücksichtigt. Die unterschiedlichen Dissoziationskonstanten werden mit der Nichtplanarität des Phenylrings in den Liganden erklärt. Außerdem wurden die Komplexbildungskonstanten bestimmt; sie sind in die Diskussion miteinbezogen.

     

Electronic, cyclic voltammetry, IR and EPR spectral studies of copper(II) complexes with 12-membered N4, N2O2 and N2S2 donor macrocyclic ligands

A new series of copper(II) complexes have been synthesized with macrocyclic ligands having three different donating atoms in the macrocyclic ring. It has been shown that the stereochemistry of complexes is dependent on the coordinated anions. These complexes are characterized by various physicochemical techniques, viz. elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic, 1H NMR and EPR spectral studies. Cyclic voltammetric behavior of the complexes has also been discussed. The observed anisotropic g-values indicate that the chloro and acetato complexes are six-coordinate tetragonal. Whereas the sulfato and nitrato complexes are found to have five-coordinate square-pyramidal and four-coordinate square-planar geometry, respectively.     

Oxidation of cyclohexane with molecular oxygen using a Schiff base cobalt complex bonded to carbamate-modified silica gel

The Schiff base [1,2-bis(salicylidene amino)phenylene]cobalt(II) complex, chemically bonded to a carbamate-modified silica gel catalyst, has been prepared by a four step procedure. The oxidation of cyclohexane was studied in the presence of this catalyst under relatively mild conditions (150–200 °C, 15–20 atm) using molecular oxygen. The catalyst was found to be very selective for the production of cyclohexanol, with cyclohexanone formed in only a small amount (45:1). This is in contrast to the commercially available processes in which cyclohexanol and cyclohexanone are both formed in appreciable amounts. The t.g.a. analysis shows the catalyst to be stable up to 211 °C and atomic absorption spectroscopy indicated negligible metal loss during 50 h use of the catalyst up to 180 °C.     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.