Temperature sensors and optical sensors

The dependence of temperature on the fluorescence lifetime and fluorescence intensity ratio using Stark sublevels and thermally coupled (close lying) levels in triply ionized rare earth ions, doped into a variety of glasses and fibers, have been reviewed. Also, it is claimed that not only for the two closely lying levels of triply ionized rare earth ion of the same kind, but also for two different triply ionized rare earth ions, having their excited levels very close to each other, may be used to monitor the temperature. PACS 42.70.Ce     

Structural and optical characterization of CdS nanoparticles prepared by chemical precipitation method

In the present study we have synthesized CdS semiconducting quantum dots by the chemical precipitation method using Thioglycerol as the capping agent. X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) are employed to characterize the size, morphology and crystalline structure of the as-prepared material. The synthesized QPs have a mixture of cubical and hexagonal crystal symmetry with 12 nm average diameter. Ultraviolet-visible (UV-vis) absorption spectroscopy is used to calculate the band gap of the material and blue shift in absorption edge. Confinement of the optical phonon modes in the QPs is studied by Raman spectroscopy, while FTIR for identification of chemical bonds in the nanomaterial. Multiple cadmium and sulphur defects were observed by employing the photoluminescence (PL) method.     

Infrared emission and defect centres in Er and Yb codoped Y3Al5O12 phosphors

YAG phosphor powders doped/codoped with Er³⁺/(Er³⁺ + Yb³⁺) have been synthesised by using the solution combustion method. The effect of direct pumping into the ⁴I_11/2 level under 980 nm excitation of doped/codoped Er³⁺/Yb³⁺−Er³⁺ in Y₃Al₅O₁₂ (YAG) phosphor responsible for an infrared (IR) emission peaking at ∼1.53 μm corresponding to the ⁴I_13/2→⁴I_15/2 transition has been studied. YAG exhibits three thermally-stimulated luminescence (TSL) peaks at around 140°C, 210°C and 445°C. Electron spin resonance (ESR) studies were carried out to identify the centres responsible for the TSL peaks. The room temperature ESR spectrum of irradiated phosphor appears to be a superposition of two distinct centres. One of the centres (centre I) with principal g-value 2.0176 is identified as O⁻ ion, while centre II with an isotropic g-factor 2.0020 is assigned to an F⁺ centre (singly ionised oxygen vacancy). An additional defect centre is observed during thermal-annealing experiments and this centre (assigned to F⁺ centre) seems to originate from an F-centre (oxygen vacancy with two electrons) and these two centres appear to correlate with the observed high-temperature TSL peak in YAG phosphor.     

Macroscopic recognition of iodide by polymer appended calix[4]amidocrown resin

ABSTRACT

The current study reveals the synthesis of polymer appended Calix[4]amidocrown-5 with specific binding affinity for iodide at ppm-level. The low detection limits are observed via UV-vis and fluorescence spectroscopy. The time-dependent solution and solid-state ¹²⁷I NMR studies with 18.8 and 19 ppm shifts, indicate a strong sensing nature of resin towards iodide ion. A significant reduction in surface area and pore volume with higher thermostability of resin after iodide uptake indicated iodide inclusion in the amidocrown cavity. The mechanism of iodide sensing may be governed by noncovalent interactions of NH and OH protons present in amidocrown and phenyl ring as observed in terms of emission enhancement in fluorescence spectroscopy. The binding affinity and stoichiometric determinations are determined by Benesi-Hildebrand and Jobs plots, respectively.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.     

Simultaneous determination of novel β-lactamase inhibitor WCK 4234 and Meropenem in dog plasma by LC–MS/MS and its application to preclinical pharmacokinetic study

A precise and accurate liquid chromatography–tandem mass spectrometric (LC–MS/MS) bioanalytical method has been developed and validated for the simultaneous quantification of WCK 4234 and meropenem (MEM) in dog plasma. Protein precipitation using acetonitrile was employed as a sample preparation approach. Cefepime was used as an internal standard. The developed method was selective, sensitive (limit of quantification, 0.075 μg/ml for both drugs), accurate (recovery > 90%), precise (CV < 10%) and linear (r² ≥ 0.99, concentration range 0.075–120 μg/ml for both analytes). The developed method was successfully applied for the determination of both drugs in plasma to assess the pharmacokinetics in beagle dogs. WCK 4234 + MEM in a 1:1 ratio at 15 + 15 and 30 + 30 mg/kg doses were administered by the intravenous route. The mean plasma concentration and area under the concentration–time curve of WCK 4234 ranged from 38.3 to 77.4 μg/ml and from 47.8 to 77.1 μg h/ml, respectively, and the values for MEM ranged from 52.2 to 115.3 μg/ml and 70.5 to 133.6 μg h/ml respectively. The elimination half-life of WCK 4234 and MEM was around 0.8 h.     

Measurement and Modeling of Phase Equilibrium,Volumetric Properties and Molar Refractivity of 2-Methylpropan-2-ol + Ethane-1,2-diol

2-Methylpropan-2-ol, an important fine chemical, may be dehydrated during extractive distillation with glycols as entrainer. Experimental isobaric phase equilibrium studies were carried out on binary mixtures of 2-methylpropan-2-ol with ethane-1,2-diol, as an entrainer, at the local atmospheric pressure of 94.99 kPa and at sub-atmospheric pressures of 19.99, 39.99, 59.99, 78.79 kPa using a Sweitoslawski-type ebulliometer. The Wilson and NRTL activity coefficient models were used to correlate the experimental results and the binary interaction parameters were obtained using the Generalized Reduced Gradient optimization technique. UNIFAC was also used to predict the deviations in bubble temperatures. Moreover, the variation in density, refractive index values and other derived properties (excess molar volumes, partial molar volumes and deviations in molar refractivity) were explored at 303.15, 313.15, 323.15 and 333.15 K to understand the shift of equilibrium with the variation in the mixture composition for the conformational state of the molecules. The Redlich–Kister polynomial equation was used to correlate the excess molar volumes and deviations from molar refractivity. Different theoretical mixing rules (Lorentz–Lorenz, Wiener, Heller, Gladstone–Dale and Arago–Biot) are investigated and reported in terms of average percentage deviation. Furthermore, the Prigogine–Flory–Patterson theory was used to predict the trend of the dependence of excess molar volumes on composition for the present system.     

Ageratum conyzoides L. and Its Secondary Metabolites in the Management of Different Fungal Pathogens

Ageratum conyzoides L. (Family—Asteraceae) is an annual aromatic invasive herb, mainly distributed over the tropical and subtropical regions of the world. It owns a reputed history of indigenous remedial uses, including as a wound dressing, an antimicrobial, and mouthwash as well as in treatment of dysentery, diarrhea, skin diseases, etc. In this review, the core idea is to present the antifungal potential of the selected medicinal plant and its secondary metabolites against different fungal pathogens. Additionally, toxicological studies (safety profile) conducted on the amazing plant A. conyzoides L. are discussed for the possible clinical development of this medicinal herb. Articles available from 2000 to 2020 were reviewed in detail to exhibit recent appraisals of the antifungal properties of A. conyzoides. Efforts were aimed at delivering evidences for the medicinal application of A. conyzoides by using globally recognized scientific search engines and databases so that an efficient approach for filling the lacunae in the research and development of antifungal drugs can be adopted. After analyzing the literature, it can be reported that the selected medicinal plant effectively suppressed the growth of numerous fungal species, such as Aspergillus, Alternaria, Candida, Fusarium, Phytophthora, and Pythium, owing to the presence of various secondary metabolites, particularly chromenes, terpenoids, flavonoids and coumarins. The possible mechanism of action of different secondary metabolites of the plant against fungal pathogens is also discussed briefly. However, it was found that only a few studies have been performed to demonstrate the plant’s dosage and safety profile in humans. Considered all together, A. conyzoides extract and its constituents may act as a promising biosource for the development of effective antifungal formulations for clinical use. However, in order to establish safety and efficacy, additional scientific research is required to explore chronic toxicological effects of ageratum, to determine the probability of interactions when used with different herbs, and to identify safe dosage. The particulars presented here not only bridge this gap but also furnish future research strategies for the investigators in microbiology, ethno-pharmacology, and drug discovery.     

Glass transition and crystallization kinetics analysis of Sb–Se–Ge chalcogenide glasses

Differential thermal analysis (DTA) has been employed to investigate the effect of Ge addition on the glass transition behavior and crystallization kinetics of Sb₁₀Se_90?xGe_x (x = 0, 19, 21, 23, 25, 27) alloys. The three characteristic temperatures viz. glass transition (T _g), crystallization (T _c), and melting (T _m) have been determined and found to vary with the heating rates and Ge content. Thermal stability and glass forming tendency have been evaluated in terms of ΔT (= T _c ? T _g) and reduced glass transition temperature. The activation energies for glass transition and crystallization have been used to analyze the nucleation and growth process. The activation energy analysis also determines the suitability of alloys to be used in switching applications. Results have been interpreted in terms of bond energies and structural transformations in the investigated alloys.     

Silica-Functionalized CuI: An Efficient and Selective Catalyst for N-Benzylation,Allylation, and Alkylation of Primary and Secondary Amines in Water

Silica-functionalized CuI has been reported as an efficient and selective catalyst for the selective mono-N- and N,N-dibenzylation, allylation, and alkylation of primary amines with benzylic, allylic, and alkyl halides using NaOH as base in aqueous medium. By changing the reaction temperature, mono- or di-benzylation, allylation, or alkylation could be achieved in good yield and selectivity. Secondary amines have also been benzylated, allylated, and alkylated under similar conditions. SiO₂-CuI has been characterized by Fourier transform–infrared, atomic absorption spectrometry, thermalgravimetric analysis, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy, and found to be highly selective and recyclable under the reaction conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]