Sensitive high-performance liquid chromatographic determination of famotidine in plasma. Application to pharmacokinetic study.

A sensitive high-performance liquid chromatographic (HPLC) method for the quantitation of famotidine in human plasma is described. Clopamide was used as the internal standard. Plasma samples were extracted with diethyl ether to eliminate endogenous interferences. Plasma samples were then extracted at alkaline pH with ethyl acetate. Famotidine and the internal standard were readily extracted into the organic solvent. After evaporation of ethyl acetate, the residue was analysed by HPLC. The chromatographic separation was accomplished with an isocratic mobile phase consisting of acetonitrile-water (12:88, v/v) containing 20 mM disodium hydrogenphosphate and 50 mM sodium dodecyl sulphate, adjusted to pH 3. The HPLC microbore column was packed with 5 microns ODS Hypersil. Using ultraviolet detection at 267 nm, the detection limit for plasma famotidine was 5 ng/ml. The calibration curve was linear over the concentration range 5-500 ng/ml. The inter- and intra-assay coefficients of variation were found to be less than 10%. Applicability of the method was demonstrated by a bioavailability/pharmacokinetic study in normal volunteers who received 80 mg famotidine orally.     

A New Convenient Method for the Resolution of 1, 1''''-Binaphthalene-2, 2''''-diol Via a Phosphite Using (-)-Menthol as Resolving Agent

Optically active 1,1-binaphthalene-2, 2-diol has become a quite important chiral source in different fields of chirotechnology, especially in asymmetric synthesis1. Its synthesis and resolution has been extensively studied and various resolution methods have been reported2. Among the reported resolution methods, the following three, namely, via the formation of phosphoric acid derivatives3, boric acid derivatives4 and inclusion complexes5, are the most important. OHOH+_( )-1(-)-(S)-1(+)-(R)…     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.     

Efficient synthesis of bromocyclopenta[b] indoles via a bromination ‐ reduction sequence

Substituted cyclopenta[b]indoles are selectively brominated in good yields with excess pyridine ‐ Br₂ charge‐transfer complex (PyBr₂) in a one‐pot reaction to provide 5 and/or 7‐bromoindoles. The mechanism involves the formation of an adduct (addition of bromine on the central double bond) which is subsequently reduced in situ with Zn and AcOH. A variety of functional groups in the cyclopentyl and the benzenoid rings are tolerated.     

Inner-shell and valence-shell electronic excitation of SF6, SeF6 and TeF6 by high energy electron impact: An investigation of potential barrier effects

Inner- and valence-shell electron energy loss spectra of gaseous SF₆, SeF₆ and TeF₆ have been measured at high impact energy (2.0–3.7 keV) and zero degree scattering angle. The resulting inner-shell excitation spectra include F 1s, S 2s and 2p in SF₆: F 1s, Se 3s, 3p and 3d in SeF₆ and F 1s, Te 4s, 4p, 4d and 3d in TeF₆. The results for each of these hexafluorides are interpreted, in the framework of the potential barrier model, as excitations to resonances involving a common manifold of virtual valence (inner-well) orbitals and also to Rydberg (outer-well) orbitals. The below-edge shape resonances in corresponding inner-shell excitation spectra of these hexafluorides show very similar variations in intensities in accord with expectations based on electric-dipole selection rules. This is an indication that these below-edge resonances in SeF₆ and TeF₆ are of the same symmetry as those in SF₆ (i.e. a_1g and t_1u). The continuum (above-edge) shape resonances in SeF₆ also show similar spectral behavior to those of SF₆ and can be understood by including Se 4d and S 3d orbitals in the basis for the respective MO schemes. However, in TeF₆ completely different spectral behavior is observed for the continuum resonances. In particular, there is a dramatic series of intense resonances observed above the Te 3d and 4d edges. The TeF₆ spectrum can only be understood by extending the MO basis set to include the Te 4f orbitals which are even lower lying than the Te 5d orbitals. Therefore, these continuum resonances which are also seen in the F 1 s and Te 3p spectra of TeF₆ are assigned to l=3 (f-type) continuum shape resonances due to involvement of the 4f orbitals rather than the l=2 (d-type) continuum resonances observed in SF₆ and SeF₆. This is the first reported observation of such f-type continuum shape resonances and such considerations will likely prove to be important in the understanding of near-edge spectra of heavy atom containing species. The VSEELS spectra which are very similar for the three hexafluorides also show significant continuum shape resonances. A consideration of both the ISEELS and the VSEELS spectra indicates that there is a weakening of the potential barrier in going through the series from SF₆, SeF₆ to TeF₆.     

On constrained multivariate splines and their approximations

Summary The variational formulation of multivariate spline functions is generalized to include cases where the function has to satisfy inequality constraints such as positivity and convexity. Condition for existence and uniqueness of a solution is given. Approximation to the solution can be obtained by solving the variational problem in a finite dimensional subspace. Conditions for convergence and error estimates of the approximations are presented, both for interpolation problems and smoothing problems. The general theory is illustrated by specific examples including the volume-matching problem and the one-sided thin plate spline.This research is partially supported by the U.S. Army Contract No. DAAG 29-77-G-0207, and by NSF Grant No. MCS-8101836Part of this paper is based on Chapters 2 and 3 of the author's Ph. D. thesis. The author would like to express his sincere thanks to Professor Grance Wahba and to two referees for many helpful comments     

Sample-pretreatment procedure for routine liquid chromatographic assay of serum cortisol

A specific method for measuring concentrations of cortisol in serum, by preliminary isolation on a "minicolumn" followed by elution and determination by liquid chromatography, is described. This assay requires only 500 microl of serum. The limit of determination of cortisol was found to be 5 microg l . The analytical recovery of cortisol added to serum ranged from 98 to 102%. The coefficients of variation ranged from 2.4 to 3.4% (within-day) and from 3.6 to 8.8% (day-to-day), depending on the cortisol concentration. The method compares well with a commonly used radioimmunological method.     

Resonant Raman spectra and first molecular hyperpolarizabilities of strongly charge-transfer molecules

The effect of vibrational structure on the frequency dependence of the first molecular hyperpolarizability of two thiophene-based charge-transfer chromophores is investigated. A time domain formulation is used to express the polarizability. The new expression includes the solvent-induced inhomogeneous distribution of electronic transition frequencies as well as the effect of the motion of solvent molecules that modulates the vibrational and electronic transition frequencies of the nonlinear optical molecule on which the first molecular hyperpolarizability depends. Resonance Raman scattering and one-photon absorption spectra of the chromophores are measured. By simultaneously fitting the experimental one-photon absorption spectrum and Raman cross sections of vibrational lines derived from resonance Raman scattering to a theoretical model, important parameters needed for the calculation of the first molecular hyperpolarizability are obtained. The first molecular hyperpolarizability is calculated as a function of frequency covering both nonresonance and two-photon resonance regions. The calculated result is compared with the measured hyperpolarizability as a function of frequency of the excitation laser. The resonance Raman-based analysis is shown to account reasonably well for the dispersion of the hyperpolarizability of the two charge transfer chromophores.     

Six-coordinate and five-coordinate Fe(II)(CN)(2)(CO)(x) thiolate complexes (x = 1, 2): synthetic advances for iron sites of [NiFe] hydrogenases

The dicyanodicarbonyliron(II) thiolate complexes trans,cis-[(CN)(2)(CO)(2)Fe(S,S-C-R)](-) (R = OEt (2), N(Et)(2) (3)) were prepared by the reaction of [Na][S-C(S)-R] and [Fe(CN)(2)(CO)(3)(Br)](-) (1). Complex 1 was obtained from oxidative addition of cyanogen bromide to [Fe(CN)(CO)(4)](-). In a similar fashion, reaction of complex 1 with [Na][S,O-C(5)H(4)N], and [Na][S,N-C(5)H(4)] produced the six-coordinate trans,cis-[(CN)(2)(CO)(2)Fe(S,O-C(5)H(4)N)](-) (6) and trans,cis-[(CN)(2)(CO)(2)Fe(S,N-C(5)H(4))](-) (7) individually. Photolysis of tetrahydrofuran (THF) solution of complexes 2, 3, and 7 under CO led to formation of the coordinatively unsaturated iron(II) dicyanocarbonyl thiolate compounds [(CN)(2)(CO)Fe(S,S-C-R)](-) (R = OEt (4), N(Et)(2) (5)) and [(CN)(2)(CO)Fe(S,N-C(5)H(4))](-) (8), respectively. The IR v(CN) stretching frequencies and patterns of complexes 4, 5, and 8 have unambiguously identified two CN(-) ligands occupying cis positions. In addition, density functional theory calculations suggest that the architecture of five-coordinate complexes 4, 5, and 8 with a vacant site trans to the CO ligand and two CN(-) ligands occupying cis positions serves as a conformational preference. Complexes 2, 3, and 7 were reobtained when the THF solution of complexes 4, 5, and 8 were exposed to CO atmosphere at 25 degrees C individually. Obviously, CO ligand can be reversibly bound to the Fe(II) site in these model compounds. Isotopic shift experiments demonstrated the lability of carbonyl ligands of complexes 2, 3, 4, 5, 7, and 8. Complexes [(CN)(2)(CO)Fe(S,S-C-R)](-) and NiA/NiC states [NiFe] hydrogenases from D. gigas exhibit a similar one-band pattern in the v(CO) region and two-band pattern in the v(CN) region individually, but in different positions, which may be accounted for by the distinct electronic effects between [S,S-C-R](-) and cysteine ligands. Also, the facile formations of five-coordinate complexes 4, 5, and 8 imply that the strong sigma-donor, weak pi-acceptor CN(-) ligands play a key role in creating/stabilizing five-coordinate iron(II) [(CN)(2)(CO)Fe(S,S-C-R)](-) complexes with a vacant coordination site trans to the CO ligand.