Redox‐Switchable Ring‐Closing Metathesis: Catalyst Design,Synthesis, and Study

High yielding syntheses of 1‐(ferrocenylmethyl)‐3‐mesitylimidazolium iodide ( 1 ) and 1‐(ferrocenylmethyl)‐3‐mesitylimidazol‐2‐ylidene ( 2 ) were developed. Complexation of 2 to [{Ir(cod)Cl}₂] (cod=cis,cis‐1,5‐cyclooctadiene) or [Ru(PCy₃)Cl₂(?CH‐o‐O‐iPrC₆H₄)] (Cy=cyclohexyl) afforded 3 ([Ir( 2 )(cod)Cl]) and 5 ([Ru( 2 )Cl₂(?CH‐o‐O‐iPrC₆H₄)]), respectively. Complex 4 ([Ir( 2 )(CO)₂Cl]) was obtained by bubbling carbon monoxide through a solution of 3 in CH₂Cl₂. Spectroelectrochemical IR analysis of 4 revealed that the oxidation of the ferrocene moiety in 2 significantly reduced the electron‐donating ability of the N‐heterocyclic carbene ligand (ΔTEP=9 cm^?1; TEP=Tolman electronic parameter). The oxidation of 5 with [Fe(η⁵‐C₅H₄COMe)Cp][BF₄] as well as the subsequent reduction of the corresponding product [ 5 ][BF₄] with decamethylferrocene (Fc*) each proceeded in greater than 95 % yield. Mössbauer, UV/Vis and EPR spectroscopy analysis confirmed that [ 5 ][BF₄] contained a ferrocenium species, indicating that the iron center was selectively oxidized over the ruthenium center. Complexes 5 and [ 5 ][BF₄] were found to catalyze the ring‐closing metathesis (RCM) of diethyl diallylmalonate with observed pseudo‐first‐order rate constants (k_obs) of 3.1×10^?4 and 1.2×10^?5 s^?1, respectively. By adding suitable oxidants or reductants over the course of a RCM reaction, complex 5 was switched between different states of catalytic activity. A second‐generation N‐heterocyclic carbene that featured a 1′,2′,3′,4′,5′‐ pentamethylferrocenyl moiety ( 10 ) was also prepared and metal complexes containing this ligand were found to undergo iron‐centered oxidations at lower potentials than analogous complexes supported by 2 (0.30–0.36 V vs. 0.56–0.62 V, respectively). Redox switching experiments using [Ru( 10 )Cl₂(?CH‐o‐O‐iPrC₆H₄)] revealed that greater than 94 % of the initial catalytic activity was restored after an oxidation–reduction cycle.     

Acid–Base‐Controlled Stereoselective Metalation of Overhanging Carboxylic Acid Porphyrins: Consequences for the Formation of Heterobimetallic Complexes

Overhanging carboxylic acid porphyrins have revealed promising ditopic ligands offering a new entry in the field of supramolecular coordination chemistry of porphyrinoids. Notably, the adjunction of a so‐called hanging‐atop (HAT) Pb^II cation to regular Pb^II porphyrin complexes allowed a stereoselective incorporation of the N‐core bound cation, and an allosterically controlled Newton’s cradle‐like motion of the two Pb^II ions also emerged from such bimetallic complexes. In this contribution, we have extended this work to other ligands and metal ions, aiming at understanding the parameters that control the HAT Pb^II coordination. The nature of the N‐core bound metal ion (Zn^II, Cd^II), the influence of the deprotonation state of the overhanging COOH group and the presence of a neutral ligand on the opposite side (exogenous or intramolecular), have been examined through ¹H NMR spectroscopic experiments with the help of radiocrystallographic structures and DFT calculations. Single and bis‐strap ligands have been considered. They all incorporate a COOH group hung over the N‐core on one side. For the bis‐strap ligands, either an ester or an amide group has been introduced on the other side. In the presence of a base, the mononuclear Zn^II or Cd^II complexes incorporate the carbonyl of the overhanging carboxylate as apical ligand, decreasing its availability for the binding of a HAT Pb^II. An allosteric effector (e.g., 4‐dimethylaminopyridine (DMAP), in the case of a single‐strap ligand) or an intramolecular ligand (e.g., an amide group), strong enough to compete with the carbonyl of the hung COO^?, is required to switch the N‐core bound cation to the opposite side with concomitant release of the COO^?, thereby allowing HAT Pb^II complexation. In the absence of a base, Zn^II or Cd^II binds preferentially the carbonyl of the intramolecular ester or amide groups in apical position rather than that of the COOH. This better preorganization, with the overhanging COOH fully available, is responsible for a stronger binding of the HAT Pb^II. Thus, either allosteric or acid–base control is achieved through stereoselective metalation of Zn^II or Cd^II. In the latter case, according to the deprotonation state of the COOH group, the best electron‐donating ligand is located on one or the other side of the porphyrin (COO^?>CONHR>COOR>COOH): the lower affinity of COOH for Zn^II and Cd^II, the higher for a HAT Pb^II. These insights provide new opportunities for the elaboration of innovative bimetallic molecular switches.     

Peptide conjugated cellulose nanocrystals with sensitive human neutrophil elastase sensor activity

In chronic wounds, elevated human neutrophil elastase (HNE) is a destructive protease that has been proposed as a biomarker. Numerous wound dressing designs have been introduced in an effort to lower HNE levels. The clinical detection of HNE as a point of care biomarker or an in situ colorimetric adjuvant to chronic wound dressings presents potential advantages in the management of chronic wounds. A colorimetric approach to the detection of HNE using peptide conjugated cotton cellulose nanocrystals (CCN) is reported here. For this purpose a HNE tripeptide substrate, n-Succinyl-Alanine–Alanine-Valine-para-nitroanilide (Suc-Ala–Ala-Val-pNA), was covalently attached to glycine esterified CCN and compared with a similar tetrapeptide analog for colorimetric HNE sensor activity. Visible HNE activity was significantly higher on CCN tripeptide conjugates when compared with similar analogs synthesized on paper. Upon enzymatic release of para-nitroaniline (pNA) from the Glycine-CCN conjugate of succinyl-Ala–Ala-Val-pNA, amplification of the colorimetric response from pNA with reactive dyes enhanced visible absorption of the chromogen. Two color amplifying dyes that react with pNA were compared for their ability to enhance the visual sensor response to HNE activity. The colorimetric detection of HNE with CCN tripeptide conjugates was sensitive at HNE levels previously reported in chronic wound fluid (0.05 U/mL HNE). The HNE sensor and the chromogen amplifying dyes were interfaced with 50 and 10 kD dialysis cellulose membranes (DCM) to model filtration of HNE and chromogen (pNA) from a model wound dressing surface before and after sensor reactivity. The detection sensitivity to HNE activity was assessed with the CCN-tripeptide conjugate interfaced at the DCM surface distal and proximal to a dressing surface. The HNE sensor interfaced proximal to the dressing surface was most efficient with 10 kD membrane filtration of pNA and subsequent reaction with amplifying dyes. When interfaced with the 10 kD cellulose membrane, elastase sensor activity remained sensitive to 0.05 U/mL HNE. The nanocellulose surface properties, performance and design issues of the biosensor approach are discussed.     

Polymerization of Ethylene by Silica‐Supported Dinuclear CrIII Sites through an Initiation Step Involving C?H Bond Activation

The insertion of an olefin into a preformed metal–carbon bond is a common mechanism for transition‐metal‐catalyzed olefin polymerization. However, in one important industrial catalyst, the Phillips catalyst, a metal–carbon bond is not present in the precatalyst. The Phillips catalyst, CrO₃ dispersed on silica, polymerizes ethylene without an activator. Despite 60 years of intensive research, the active sites and the way the first Cr C bond is formed remain unknown. We synthesized well‐defined dinuclear Cr^II and Cr^III sites on silica. Whereas the Cr^II material was a poor polymerization catalyst, the Cr^III material was active. Poisoning studies showed that about 65 % of the Cr^III sites were active, a far higher proportion than typically observed for the Phillips catalyst. Examination of the spent catalyst and isotope labeling experiments showed the formation of a Si–(μ‐OH)–Cr^III species, consistent with an initiation mechanism involving the heterolytic activation of ethylene at Cr^III O bonds.     

An efficient synthesis of 3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline,a promising radioprotector for cancer radiotherapy

Nitroxides can ameliorate the toxic effects of radiation during cancer therapy. Nitroxides are paramagnetic and can be used in magnetic resonance imaging (MRI) and electron paramagnetic resonance imaging (EPRI) to monitor in vivo oxidative stress status. Compound 5 (3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline) was found to be the most effective nitroxide radioprotector. An efficient synthesis for this promising radioprotector was developed.     

Bioinspired Synthesis of Well‐Ordered Layered Organic–Inorganic Nanohybrids: Mimicking the Natural Processing of Nacre by Mineralization of Block Copolymer Templates

The unique mechanical performance of nacre, the pearly internal layer of shells, is highly dependent on its complex morphology. Inspired by the structure of nacre, the fabrication of well‐ordered layered inorganic–organic nanohybrids is presented herein. This biomimetic approach includes the use of a block copolymer template, consisting of hydrophobic poly(vinylidene fluoride) (PVDF) lamellae covered with hydrophilic poly(methacrylic acid) (PMAA), to direct silica (SiO₂) mineralization. The resulting PVDF/PMAA/SiO₂ nanohybrid material resembles biogenic nacre with respect to its well‐ordered and layered nanostructure, alternating organic–inorganic phases, macromolecular template, and mild processing conditions.

     

Ru(II)-Catalyzed Hydroarylation of in situ Generated 3,3,3-Trifluoro-1-propyne by C−H Bond Activation: A Facile and Practical Access to β-Trifluoromethylstyrenes

In this study, a practical and straightforward synthesis of β-(E)-trifluoromethylstyrenes by ruthenium-catalyzed C−H bond activation was developed. The readily available and inexpensive 2-bromo-3,3,3-trifluoropropene (BTP), a non-ozone depleting reagent, was used as a reservoir of 3,3,3-trifluoropropyne. With this approach, the monofunctionalization of a panel of heteroarenes was possible in a safe and scalable manner (23 examples, up to 87 % yield). Mechanistic investigations and density functional theory (DFT) calculations were also conducted to get a better understanding of the mechanism of this transformation. These studies suggested that 1) a cyclometallated ruthenium complex enabled the transformation, 2) this complex exhibited high efficiency in this transformation compared to the commercially available [RuCl₂(p-cymene)]₂ and 3) the mechanism proceeded through a bis-cyclometallated ruthenium intermediate for the carboruthenation step.     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

Solubility and Stability of Some Pharmaceuticals in Natural Deep Eutectic Solvents-Based Formulations

Some medicines are poorly soluble in water. For tube feeding and parenteral administration, liquid formulations are required. The discovery of natural deep eutectic solvents (NADES) opened the way to potential applications for liquid drug formulations. NADES consists of a mixture of two or more simple natural products such as sugars, amino acids, organic acids, choline/betaine, and poly-alcohols in certain molar ratios. A series of NADES with a water content of 0–30% (w/w) was screened for the ability to solubilize (in a stable way) some poorly water-soluble pharmaceuticals at a concentration of 5 mg/mL. The results showed that NADES selectively dissolved the tested drugs. Some mixtures of choline-based NADES, acid-neutral or sugars-based NADES could dissolve chloral hydrate (dissociated in water), ranitidine·HCl (polymorphism), and methylphenidate (water insoluble), at a concentration of up to 250 mg/mL, the highest concentration tested. Whereas a mixture of lactic-acid–propyleneglycol could dissolve spironolacton and trimethoprim at a concentration up to 50 and 100 mg/mL, respectively. The results showed that NADES are promising solvents for formulation of poorly water-soluble medicines for the development of parenteral and tube feeding administration of non-water-soluble medicines. The chemical stability and bioavailability of these drug in NADES needs further studies.