Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.     

Spectroscopic and structural investigations reveal the signaling mechanism of a luminescent molybdate sensor

A heteroditopic ligand H(2)-L consisting of a dihydroxybenzene (catechol)-unit linked via an amide bond to a pyridyl-unit and its methyl-protected precursor Me(2)-L were synthesized, characterized, and their photophysical properties investigated. The three accessible protonation states of the ligand, H(3)-L(+), H(2)-L, and H-L(-), showed distinct (1)H NMR, absorption and emission spectroscopic characteristics that allow pH-sensing. The spectroscopic signatures obtained act as a guide to understand the signaling mechanism of the luminescent pH and molybdate sensor [Re(bpy)(CO)(3)(H(2)-L)](+). It was found that upon deprotonation of the 2-hydroxy group of H(2)-L, a ligand-based absorption band emerges that overlaps with the Re(dπ)→bpy metal-to-ligand charge transfer (MLCT) band of the sensor, reducing the quantum yield for emission on excitation in the 370 nm region. In addition, deprotonation of the catechol-unit leads to quenching of the emission from the Re(dπ)→bpy (3)MLCT state, consistent with photoinduced electron transfer from the electron-rich, deprotonated catecholate to the Re-based luminophore. Finally, reaction of 2 equiv of [Re(bpy)(CO)(3)(H(2)-L)](+) with molybdate was shown to give the zwitterionic Mo(VI) complex [MoO(2){Re(CO)(3)(bpy)(L)}(2)], as confirmed by electrospray ionization (ESI) mass spectrometry and X-ray crystallography. The crystal structure determination revealed that two fully deprotonated sensor molecules are bound via their oxygen-donors to a cis-dioxo-MoO(2) center.     

MALDI imaging mass spectrometry of lipids by adding lithium salts to the matrix solution

Mass spectrometry imaging of lipids using MALDI–TOF/TOF mass spectrometers is of growing interest for chemical mapping of organic compounds at the surface of tissue sections. Many efforts have been devoted to the best matrix choice and deposition technique. Nevertheless, the identification of lipid species desorbed from tissue sections remains problematic. It is now well-known that protonated, sodium- and potassium-cationized lipids are detected from biological samples, thus complicating the data analysis. A new sample preparation method is proposed, involving the use of lithium salts in the matrix solution in order to simplify the mass spectra with only lithium-cationized molecules instead of a mixture of various cationized species. Five different lithium salts were tested. Among them, lithium trifluoroacetate and lithium iodide merged the different lipid adducts into one single lithium-cationized species. An optimized sample preparation protocol demonstrated that the lithium trifluoroacetate salt slightly increased desorption of phosphatidylcholines. Mass spectrometry images acquired on rat brain tissue sections by adding lithium trifluoroacetate showed the best results in terms of image contrast. Moreover, more structurally relevant fragments were generated by tandem mass spectrometry when analyzing lithium-cationized species.     

Determination of seven arsenic species in seafood by ion exchange chromatography coupled to inductively coupled plasma-mass spectrometry following microwave assisted extraction: method validation and occurrence data

The determination of seven arsenic species in seafood was performed using ion exchange chromatography on an IonPac AS7 column with inductively coupled plasma mass spectrometry detection after microwave assisted extraction. The effect of five parameters on arsenic extraction recoveries was evaluated in certified reference materials. The recoveries of total arsenic and of arsenic species with the two best extraction media (100% H₂O and 80% aqueous MeOH) were generally similar in the five seafood certified reference materials considered. However, because MeOH co-elutes with arsenite, which would result in a positively biased arsenite concentration, the 100% H₂O extraction conditions were selected for validation of the method. Figures of merit (linearity, LOQs (0.019-0.075 mg As kg⁻¹), specificity, trueness (with recoveries between 82% (As(III)) and 104% (As(V) based on spikes or certified concentrations), repeatability (3-14%), and intermediate precision reproducibility (9-16%) of the proposed method were satisfactory for the determination of arsenite, monomethylarsonic acid, dimethylarsinic acid, arsenate, arsenobetaine and arsenocholine in fish and shellfish. The performance criteria for trimethylarsine oxide, however, were less satisfactory. The method was then applied to 65 different seafood samples. Arsenobetaine was the main species in all samples. The percentage of inorganic arsenic varied between 0.4-15.8% in shellfish and 0.5-1.9% at the utmost in fish. The main advantage of this method that uses only H₂O as an extractant and nitric acid as gradient eluent is its great compatibility with the long-term stability of both IEC separation and ICP-MS detection.     

Strong ion-exchange centrifugal partition chromatography as an efficient method for the large-scale purification of glucosinolates

The glucosinolates sinalbin and glucoraphanin were purified by strong ion-exchange displacement centrifugal partition chromatography (SIXCPC). The optimized conditions involved the biphasic solvent system ethyl acetate/n-butanol/water (3:2:5, v/v), the lipophilic anion-exchanger Aliquat 336 (trioctylmethylammonium chloride, 160 and 408 mM) and a sodium iodide solution (80 and 272 mM) as displacer. Amounts as high as 2.4 g of sinalbin and 2.6g of glucoraphanin were obtained in one step in 2.5 and 3.5h respectively, starting from 12 and 25 g of mustard and broccoli seed aqueous extracts, using a laboratory scale CPC column (200 mL inner volume).     

Reversible and Efficient Inhibition of UDP‐Galactopyranose Mutase by Electrophilic,Constrained and Unsaturated UDP‐Galactitol Analogues

A series of UDP‐galactitols were designed as analogues of high‐energy intermediates of the UDP‐galactopyranose mutase (UGM) catalyzed furanose/pyranose interconversion, an essential step of Mycobacterium tuberculosis cell wall biosynthesis. The final compounds structurally share the UDP and the galactitol substructures that were connected by four distinct electrophilic connections (epoxide, lactone and Michael acceptors). All molecules were synthesized from a common perbenzylated acyclic galactose precursor that was derivatized by alkenylation, alkynylation and cyclopropanation. The inhibition study against UGM could clearly show that slight changes in the relative orientation of the UDP and the galactitol moieties resulted in dramatic variations of binding properties. Compared to known inhibitors, the epoxide derivative displayed a very tight, reversible, inhibition profile. Moreover, a time‐dependent inactivation study showed that none of these electrophilic structures could react with UGM, or its FAD cofactor, the catalytic nucleophile of this still intriguing reaction.     

Visible‐Light‐Mediated Metal‐Free Synthesis of Trifluoromethylselenolated Arenes

The first visible‐light‐mediated synthesis of trifluoromethylselenolated arenes under metal‐free conditions is reported. The use of an organic photocatalyst enables the trifluoromethylselenolation of arene diazonium salts using the shelf‐stable reagent trifluoromethyl tolueneselenosulfonate at room temperature. The reaction does not require the presence of any additives and shows high functional‐group tolerance, covering a very broad range of starting materials. Mechanistic investigations, including EPR spectroscopy, luminescence investigations, and cyclic voltammetry allow rationalization of the reaction mechanism.     

Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Vinyl nosylates as partner in copper and silver co-catalyzed Sonogashira cross-coupling reactions

Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide.