Structural aspects of the metal-insulator transitions in V0.985Al0.015O2

The crystal structure of V_0.985Al_0.015O₂ has been refined from single-crystal X-ray data at four temperatures. At 373°K it has the tetragonal rutile structure. At 323°K, which is below the first metal-insulator transition, it has the monoclinic M₂ structure, where half of the vanadium atoms are paired with alternating short (2.540 Å) and long (3.261 Å) V-V separations. The other half of the vanadium atoms form equally spaced (2.935 Å) zigzag V chains. At 298°K, which is below the second electric and magnetic transition, V_0.985Al_0.015O₂ has the triclinic T structure where both vanadium chains contain V-V bonds, V(1)-V(1) = 2.547 Å and V(2)-V(2) = 2.819 Å. At 173°K the pairing of the V(1) chain remains constant: V(1)-V(1) = 2.545 Å, whereas that of the V(2) chain decreases: V(2)-V(2) = 2.747 Å. From the variation of the lattice parameters as a function of temperature it seems that these two short V-V distances will not become equal at lower temperatures. The effective charges as calculated from the bond strengths at 298 and 173°K show that a cation disproportionation has taken place between these two temperatures. About 20% of the V⁴⁺ cations of the V(1) chains have become V³⁺ and correspondingly 20% of the V⁴⁺ cations of the V(2) chains have become V⁵⁺. This disproportionation process would explain the difference between the two short V-V distances. Also it would explain why the T → M₁ transition does not take at lower temperatures.     

Simple interface for capillary electrophoresis-inductively coupled plasma atomic emission spectrometry

A simple interface has been developed to couple capillary electrophoresis (CE) to inductively coupled plasma atomic emission spectrometry (ICP-AES) for metal speciation. A concentric glass nebulizer with elongated tip is used as the CE-ICP interface. The CE capillary is the central tube of the nebulizer. A platinum wire is wrapped across the exit end of the CE capillary to provide electrical connection to the CE power supply. No sheath flow of buffer solution is needed. A simple cooling system has also been developed. A peristaltic pump circulates water through a plastic tube that encloses the section of the CE capillary between the CE instrument and the ICP spectrometer. Characteristics of the CE-ICP interface, e.g., elution time, nebulization and transport efficiency and peak broadening, versus carrier gas flow-rate have been studied. Comparisons to a previous design with the Pt electrode inserted into the end of the CE capillary are made where appropriate. The reproducibility (RSD) in ICP emission intensity of the system is <4%. Detection limits of Cr and Cu are approximately 5 ng/ml.     

Characterization and epitope mapping of two monoclonal antibodies against human CD99

CD99 plays a critical role in the diapedesis of monocytes, T cell differentiation, and the transport of MHC molecules. Engagement of CD99 by agonistic monoclonal antibodies has been reported to trigger multifactorial events including T cell activation as well as cell-cell adhesion during hematopoietic cell differentiation. In this study, to identify the functional domains participating in the cellular events, we mapped the epitopes of CD99, which are recognized by two agonistic CD99 monoclonal antibodies, DN16 and YG32. Using recombinant fusion proteins of GST with whole or parts of CD99, we found that both antibodies interact with CD99 molecules independently of sugar moieties. DN16 mAb detected a linear epitope located in the amino terminal region of CD99 while YG32 mAb bound another linear epitope in the center of the extracellular domain. To confirm that the identified epitopes of CD99 are actually recognized by the two mAbs, we showed the presence of physical interaction between the mAbs and the fusion proteins or synthetic peptides containing the corresponding epitopes using surface plasmon resonance analyses. The dissociation constants of DN16 and YG32 mAbs for the antigen were calculated as 1.27 x 10(-7) and 7.08 x 10(-9) M, respectively. These studies will help understand the functional domains and the subsequent signaling mechanism of CD99.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Poly(styrene-b-2-vinylpyridine-1-oxide) diblock copolymers: 3. Microemulsions in water/propan-2-ol/toluene mixtures

Pseudo-ternary phase diagrams have been constructed for the three-component solvent system (toluene+water+propan-2-ol) containing diblock copolymers of poly(styrene-b-2-vinylpyridine-1-oxide). Microemulsions have been shown to form on the water-rich side of the phase diagram, in the region of the phase boundary without polymer. Dynamic light-scattering experiments have led to droplet size values in the region of 100 nm, with the size depending strongly on the propan-2-ol/water concentration, as well as the amount of solubilised toluene in the core. Viscometry experiments have been carried out to measure polymer aggregation numbers in the microemulsion droplets, and interfacial tension measurements have shown that in the absence of propan-2-ol (effectively a cosurfactant) the limiting value of the oil/water interfacial tension, even an saturation adsorption of the copolymer is 20 mNm^–1. However, addition of propan-2-ol reduces the interfacial tension to the very low values generall commensurate with microemulsion formation.     

Dipolare (1:1)-Addukte aus der Reaktion von 3-Amino-2H-azirinen mit 1,3,4-Oxadiazol- und 1,3,4-Thiadiazol-2(3H)-onen

Dipolar 1:1 Adducts from the Reaction of 3-Amino-2H-azirines with 1,3,4-Oxadiazol- and 1,3,4-Thiadiazol-2(3H)-ones 3-Amino-2H-azirines 1 react with 5-(trifluoromethyl)-1,3,4-oxadiazol-2(3H)-one ( 2 ) as well as with different 5-substituted 1,3,4-thiadiazol-2(3H)-ones ( 5a–e ) in 2-propanol at room temperature to give dipolar 1:1 adducts of type 3 and 6 , respectively, in reasonable-to-good yields (Schemes 3 and 6, Tab. 1 and 2). The structure of two of these dipolar adducts, 6a and 6e , which are formally donor-acceptor-stabilized azomethin imines, have been elucidated by X-ray crystallography (Figs. 1-4). In the reaction of 2 and sterically crowded 3-amino-2H-azirines 1c–e with a 2-propyl and 2-propenyl substituent, respectively, at C(2), a 4,5-dihydro-1,2,4-triazin-3(2H)-one of type 4 is formed as minor product (Scheme 3 and Table 1). Independent syntheses of these products proved the structure of 4 . Several reaction mechanisms for the formation of compounds 3 and 4 are discussed, the most likely ones are described in Scheme 4: reaction of 2 as an NH-acidic compound leads, via a bicyclic zwitterion of type A , to 3 as well as to 4 . In the latter reaction, a ring-expanded intermediate B is most probable.     

Mathematical theory of reduction of physical parameters and similarity analysis

The method of similarity analysis in the study of differential equations is extended to study the variability of parameters in a physical system. The analysis provides an insight into the meaning of physical similarity, which usually means the possibility of a reduction in the number of physical parameters characterizing the system. Theorems relating similarities to groups of invariant transformations are proved and employed to show how the number of parameters can be reduced.     

Functional Bacterial Amyloids: Understanding Fibrillation,Regulating Biofilm Fibril Formation and Organizing Surface Assemblies

Functional amyloid is produced by many organisms but is particularly well understood in bacteria, where proteins such as CsgA (E. coli) and FapC (Pseudomonas) are assembled as functional bacterial amyloid (FuBA) on the cell surface in a carefully optimized process. Besides a host of helper proteins, FuBA formation is aided by multiple imperfect repeats which stabilize amyloid and streamline the aggregation mechanism to a fast-track assembly dominated by primary nucleation. These repeats, which are found in variable numbers in Pseudomonas, are most likely the structural core of the fibrils, though we still lack experimental data to determine whether the repeats give rise to β-helix structures via stacked β-hairpins (highly likely for CsgA) or more complicated arrangements (possibly the case for FapC). The response of FuBA fibrillation to denaturants suggests that nucleation and elongation involve equal amounts of folding, but protein chaperones preferentially target nucleation for effective inhibition. Smart peptides can be designed based on these imperfect repeats and modified with various flanking sequences to divert aggregation to less stable structures, leading to a reduction in biofilm formation. Small molecules such as EGCG can also divert FuBA to less organized structures, such as partially-folded oligomeric species, with the same detrimental effect on biofilm. Finally, the strong tendency of FuBA to self-assemble can lead to the formation of very regular two-dimensional amyloid films on structured surfaces such as graphite, which strongly implies future use in biosensors or other nanobiomaterials. In summary, the properties of functional amyloid are a much-needed corrective to the unfortunate association of amyloid with neurodegenerative disease and a testimony to nature’s ability to get the best out of a protein fold.