Hydrogen bonding in redox-modulated molecular recognition. An experimental and theoretical investigation

Two receptors, a diaminotriazine derivative (DAT) and diamidopyridine (DAP), are complementary to the electroactive naphthalimide (N) through three-point hydrogen bonding. The association constants of the two receptors were evaluated for both the fully oxidized and the radical anion forms of N. In the oxidized state, the two receptors displayed identical binding constants. Diamidopyridine, however, lowers the reduction potential of naphthalimide to a far greater extent than does diaminotriazine, indicating a greater affinity for diamidopyridine by naphthalimide in the radical anion form. This behavior was mirrored by EPR experiments that showed small deviations from the hyperfine coupling pattern of N(red) in the presence of DAT, with greater effects seen for the N(red).DAP complex. Computational simulations using the UB3LYP/6-311+G(d,p)//UHF/6-31G(d) hybrid gave theoretical hyperfine constants in good quantitative agreement with the experimental results. Using this correlation, we determined that electrostatics and hydrogen bond polarizability play key roles in controlling redox-modulated molecular recognition.     

In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.

The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.     

Preparation and Swelling Properties of Poly(NIPAM) "Minigel" Particles Prepared by Inverse Suspension Polymerization

The characterization of temperature- and pH-sensitive poly-N-isopropylacrylamide (poly-NIPAM) microgel particles, produced by surfactant-free emulsion polymerization, has been extensively reported. In the work described here poly(NIPAM) gel particles, cross-linked with N-N'-methylenebisacrylamide (BA), have been produced using inverse suspension polymerization. These particles have been termed "minigels" here since they are somewhat larger than conventional microgels. Results suggest that minigel particles are formed as a dilute suspension, within the aqueous dispersed (droplet) phase. The hydrodynamic diameter of the minigel particles produced in this work is 相似文献   

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.     

Termolecular ion-molecule reactions in Titan’s atmosphere. II: The structure of the association adducts of HCNH+ with C2H2 and C2H4

The ion-molecule reactivity of the products formed in the association reactions of HCNH+ with C2H2 (C3H4N+) and C2H4 (C3H6N+) has been investigated to provide information on the structures of the adducts thus formed. The C3H4N+ and C3H6N+ adducts were formed in the reaction flow tube of a flowing afterglow sourced-selected ion flow tube (FA-SIFT) and their reactivity with a neutral molecular "probe" examined. The reactivity of possible known structural isomers for the C3H4N+ and C3H6N+ ions was investigated in both the FA-SIFT and an ion cyclotron resonance spectrometer (ICR). Ab initio investigations of the potential energy surfaces for both structures at the G2(MP2) level have also been performed and structures corresponding to local minima on both surfaces have been identified and evaluated. The results of these experimental and theoretical studies show that at room temperature, the C3H4N+ adduct ion contains two isomers; a less reactive one that is likely to be a four-membered cyclic covalent isomer (approximately 70%) and a faster reacting component that is probably an electrostatic complex (approximately 30%). The C3H6N+ adduct ion formed from HCNH+ + C2H4 at room temperature is a single isomer that is likely to be the four-membered covalently bound cyclic CH2CH2CHNH+ species.     

Molybdenum triamidoamine complexes that contain hexa-tert-butylterphenyl, hexamethylterphenyl, or p-bromohexaisopropylterphenyl substituents. An examination of some catalyst variations for the catalytic reduction of dinitrogen

Three new tetramines, (ArNHCH(2)CH(2))(3)N, have been synthesized in which Ar = 3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3) (H(3)[HTBTN(3)N]), 3,5-(2,4,6-Me(3)C(6)H(2))(2)C(6)H(3) (H(3)[HMTN(3)N]), or 4-Br-3,5-(2,4,6-i-Pr(3)C(6)H(2))(2)C(6)H(2) (H(3)[pBrHIPTN(3)N]). The diarylated tetramine, [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(2), has also been isolated, and the "hybrid" tetramine [3,5-(2,4,6-t-Bu(3)C(6)H(2))(2)C(6)H(3)NHCH(2)CH(2)](2)NCH(2)CH(2)NH(4-t-BuC(6)H(4)) has been prepared from it. Monochloride complexes, [(TerNCH(2)CH(2))(3)N]MoCl, have been prepared, as well as a selection of intermediates that would be expected in a catalytic dinitrogen reduction such as [(TerNCH(2)CH(2))(3)N]Mo[triple bond]N and [[(TerNCH(2)CH(2))(3)N]Mo(NH(3))][BAr'(4)] (Ter = HTBT, HMT, or pBrHIPT and Ar' = 3,5-(CF(3))(2)C(6)H(3))). Intermediates that contain the new terphenyl-substituted ligands are then evaluated for their efficiency for the catalytic reduction of dinitrogen under conditions where analogous [HIPTN(3)N]Mo species give four turnovers to ammonia under "standard" conditions with an efficiency of approximately 65%. Only [pBrHIPTN(3)N]Mo compounds are efficient catalysts for dinitrogen reduction. The reasons are explored and discussed.     

Relevant synthesis parameters for the sequential catalytic growth of carbon nanotubes

Sequential catalytic growth provides an efficient tool for the synthesis of carbon nanotubes periodically inserted with catalyst nanoparticles. Several synthesis parameters were found crucial in order to induce this particular growth mechanism. The presence of phosphorus is required to form metal phosphide particles active for the formation of carbon nanotubes with a matchstick morphology. The metal composition (Ni/Fe ratio) and the carbon supply have no influence on the nanofilament type but strongly affect the nanotube yield. The synthesis temperature induces important changes on both the nanofilament type and yield, which are correlated with important transformations of the catalyst layer in terms of composition, particle size, and physical state.     

Enantioselective approaches to potential MetAP-2 reversible inhibitors

[reaction: see text] Enantioselective deprotonation of 4-substituted cyclohexanones and highly stereoselective conjugate addition of higher order mixed cuprates were the key steps in a concise synthesis of fumagalone-related molecules. The origin of the (low) biological activity of the new compounds as compared to fumagalone is briefly discussed.     

Optically switchable liquid crystal photonic structures

Photo-optic materials offer the possibility of light controlled photonic devices, intelligent and environmentally adaptive optical materials. One strategy for creating these materials is the combination of structure formation through holographic photopolymerization and the variable optical properties of liquid crystals. Holographically patterned, polymer stabilized liquid crystals (HPSLCs) have proven to be useful optical materials. By incorporating photo-optic, azobenzene-derived liquid crystal blends into such material systems, we have generated practical photoresponsive optical materials.     

Poly(styrene-b-2-vinylpyridine-1-oxide) diblock copolymers: 3. Microemulsions in water/propan-2-ol/toluene mixtures

Pseudo-ternary phase diagrams have been constructed for the three-component solvent system (toluene+water+propan-2-ol) containing diblock copolymers of poly(styrene-b-2-vinylpyridine-1-oxide). Microemulsions have been shown to form on the water-rich side of the phase diagram, in the region of the phase boundary without polymer. Dynamic light-scattering experiments have led to droplet size values in the region of 100 nm, with the size depending strongly on the propan-2-ol/water concentration, as well as the amount of solubilised toluene in the core. Viscometry experiments have been carried out to measure polymer aggregation numbers in the microemulsion droplets, and interfacial tension measurements have shown that in the absence of propan-2-ol (effectively a cosurfactant) the limiting value of the oil/water interfacial tension, even an saturation adsorption of the copolymer is 20 mNm^–1. However, addition of propan-2-ol reduces the interfacial tension to the very low values generall commensurate with microemulsion formation.