OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

Syntheses of nucleosides with 2′-spirolactam and 2′-spiropyrrolidine moieties as potential inhibitors of hepatitis C virus NS5B polymerase

To discover novel nucleosides as potential antiviral agents, 2′-spirolactam and 2′-spiropyrrolidine-containing nucleoside analogs were envisioned. Efficient synthetic routes were developed with an epoxide opening as the key step to establish the quaternary center at the 2′ position, leading to the design and synthesis of uridine analogs 8 and 21, prodrugs 13–16, and cytidine analog 11.     

Syntheses of 4′-spirocyclic phosphono-nucleosides as potential inhibitors of hepatitis C virus NS5B polymerase

To discover novel nucleosides as potential antiviral agents, 4′-spirocyclic phosphono-nucleosides were designed to mimic the monophosphate of R-1479, a known nucleoside inhibitor of HCV NS5B. Bypassing the first kinase step to nucleoside monophosphate is viewed as advantageous since this phosphorylation is often observed as the rate-limiting transformation to the active NTP for many nucleosides. Efficient synthetic routes were developed with a triphenylphosphine–iodine cyclization reaction as the key step to form the tetrahydrofuran 4′-spirocycle. The desired 4′-spirocyclic phosphono-cytidine analogs 12a, 12b, and 16 were prepared in 11 steps.     

Quality by design: A systematic and rapid liquid chromatography and mass spectrometry method for eprosartan mesylate and its related impurities using a superficially porous particle column

The present work describes the systematic development of a robust, precise, and rapid reversed‐phase liquid chromatography method for the simultaneous determination of eprosartan mesylate and its six impurities using quality‐by‐design principles. The method was developed in two phases, screening and optimization. During the screening phase, the most suitable stationary phase, organic modifier, and pH were identified. The optimization was performed for secondary influential parameters—column temperature, gradient time, and flow rate using eight experiments—to examine multifactorial effects of parameters on the critical resolution and generated design space representing the robust region. A verification experiment was performed within the working design space and the model was found to be accurate. This study also describes other operating features of the column packed with superficially porous particles that allow very fast separations at pressures available in most liquid chromatography instruments. Successful chromatographic separation was achieved in less than 7 min using a fused‐core C₁₈ (100 mm × 2.1 mm, 2.6 μm) column with linear gradient elution of 10 mM ammonium formate (pH 3.0) and acetonitrile as the mobile phase. The method was validated for specificity, linearity, accuracy, precision, and robustness in compliance with the International Conference on Harmonization Q2 (R1) guidelines. The impurities were identified by liquid chromatography with mass spectrometry.     

New chalcone based liquid crystals with allylidene amino linking unit: Synthesis and characterization

In this study, the synthesis, structural characterization and mesomorphic properties of newly thirteen calamitic shaped compounds derived from allylidene amino chalcone and 4-n-alkoxy benzoyloxy benzoic acid. Comp.H₁ to H₃ exhibited nonliquid crystalline nature, while comp.H₄ to comp.H₁₈ displayed enantiotropical smectic C phase. Phase transition temperatures of present synthesised compounds were determined by optical polarising microscopy (POM), differential scanning calorimetric (DSC) and powder X-ray diffraction (PXRD) techniques. Thermal stabilities of smectic to isotropic phase are 150.0 °C and temperature range of mesophase is in decreasing order from comp.H₃ to comp.H₁₈ respectively. The presences of SmC phase are the type of broken fan and needle type in present synthesized series. It is also shown that presence of chalcone amino allylidene central linking group favors a calamitic liquid crystalline behaviour in molecules with lower member to higher member aliphatic side chain in alkoxy group (-OR).     

Transition metal-catalyzed regio- and stereoselective aminobromination of olefins with TsNH2 and NBS as nitrogen and bromine sources

[reaction: see text] A new synthetic procedure for aminohalogenation of olefins has been developed for the preparation of vicinal haloamine derivatives in high yields by using Cu, Mn, or V catalysts with p-toluenesulfonamide (TsNH(2)) and N-bromosuccinimide (NBS) as nitrogen and bromine sources, respectively. Unprecedented regio- and stereoselectivity (anti:syn > 99:1) toward the aminohalogenation process is shown for olefinic substrates as well as transition metal catalysts.     

Preparation and electrical conductivity of organoheterobimetallic-maleonitriledithiolates

The new complexes [PhHg]₂[M(mnt)₂] [M = Ni^II, Cu^II, Zn^II or Pd^II; mnt^2– = 1,2-dicyano-1,2-ethylenedithiolate (maleonitriledithiolate)] have been characterized spectroscopically and magnetically and their solid phase conductivity measured. All compounds exhibit solid phase _rt in the 1.29 × 10^–12–5.68 × 10^–10 S cm^–1 range and semiconduct in the 313–383 K range.     

Electrochemical approach for synthesis of 3-substituted indole derivatives

An efficient and economical method was developed for synthesis of 3-substituted indole by using electrochemically induced condensation of various aldehyde, indole and malononitrile.     

Colloidal gold probe based rapid immunochromatographic strip assay for cortisol

A rapid and semi-quantitative immunochromatographic strip (ICS) test for cortisol analysis in serum was developed. The test strip was based on a competitive assay format. Colloidal gold nanoparticles were synthesized and coupled with cortisol-3-carboxymethyloxime-adipic acid dihydrazide-bovine serum albumin (F-3-CMO-ADH-BSA) antigen to directly compete with cortisol in human serum samples. F-3-CMO-ADH-BSA-gold label and uncoupled colloidal gold nanoparticles were appropriately characterized using UV-vis spectroscopy, transmission electron microscopy and atomic force microscopy. Anticortisol antibody raised against F-3-CMO-BSA immunogen in New Zealand white rabbits was coated on the NC membrane as test line. Anti-BSA antibody was used as control line. The lower detection limit of the ICS test was 30 ngmL(-1) with visual detection and was completed in 10 min. About 30 human serum samples were also analyzed by the developed strip test and their range of cortisol concentration was established. The developed ICS test is rapid, economic and user friendly.